- 您现在的位置：买卖IC网 > Datasheet目录311 > ARD00386 (Microchip Technology)BOARD MCP1640 2CELL BOOST CONV Datasheet资料下载
参数资料
| 型号： | ARD00386 |
| 厂商： | Microchip Technology |
| 文件页数： | 18/26页 |
| 文件大小： | 0K |
| 描述： | BOARD MCP1640 2CELL BOOST CONV |
| 标准包装： | 1 |
| 主要目的： | DC/DC，步升 |
| 输出及类型： | 1，非隔离 |
| 输出电压： | 12V |
| 电流 - 输出： | 50mA |
| 输入电压： | 2 ~ 3 V |
| 稳压器拓扑结构： | 升压 |
| 频率 - 开关： | 500kHz |
| 板类型： | 完全填充 |
| 已供物品： | 板 |
| 已用 IC / 零件： | MCP1640 |
MCP1640 12V/50 mA Two Cells Input Boost Converter Reference Design
Attention should be paid to the values of the sense resistors. When testing the board
for other output voltage, a potential issue with higher value resistors is environmental
contamination, which can create a leakage current path on the PCB. This will affect the
feedback voltage and the output voltage regulation. Engineers should use resistors that
are larger than 1 M Ω with precaution. In normal humidity conditions, the V FB input
leakage is very low and the resistors’ values will not affect the stability of the system.
When the board is powered up, the internal MCP1640 device’s start-up logic circuitry
turns the internal rectifying switch on until the output capacitor, connected at the V OUT
pin (CL), is charged to a value close to the input voltage. During start-up, the rectifying
switch limits the maximum current. Because at start-up, the external n-channel MOS
(Q) transistor is OFF, a start-up resistor (R S ) is bypassing it and the C L cap is supplied.
MCP1640 starts switching, and the external N-MOS is turned on, cascading the
internal N-MOS switch of the MCP1640 to work with high voltage, more than 6V.
Notice that the MCP1640 is working internally as a synchronous rectifier and delivers
on its output (Pin 5) a part of the total output power. This output is unregulated because
the sense resistors, R T and R B , are connected to the high output voltage. The
MCP1640 gets its start-up bias from V IN . Once the output exceeds the input, bias
comes from the output. The C L capacitor is mandatory, because it smooths the output
of MCP1640. This voltage is used to supply the internal blocks after start-up (including
the compensation circuitry). In case of instability, a few mA loads may be required (R L
is not populated on the board; for 12V output, use a 2k or 3k resistor). On the output of
MCP1640 (VO test point), a maximum 5 mA load can be connected. Exceeding the
load produces unregulated board V OUT .
The board works well in Discontinuous mode. However, once entered into Continuous
mode, V OUT goes out of regulation.
There is no undervoltage lockout feature for the MCP1640 family of devices. The
device will start up at the lowest voltage possible and run down to the lowest voltage
possible.
DS51999A-page 18
Note:
Because this configuration is an nonsynchronous converter, the MCP1640
device’s features, true disconnect output and short-circuit protection, will be
lost for this reference board. In case of a short circuit, inductor L, and diode
D, can be broken. Notice that the MCP1640 will not be affected.
? 2011 Microchip Technology Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| ARR-1276-NF | RACK ALUMINUM RELAY 42" X 19" |
| ARR-1294-BT | RACK ALUMINUM RELAY 77" X 23" |
| AS-203B | SOCKET 12V AUTO W/SAFETY CAP |
| AS1102-T | IC DRIVER LED TRIPLE 40MA SC70-6 |
| AS1112C-BQFT | IC DRIVER LED 16CHAN 32-TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ARD00410 | 制造商:Microchip Technology Inc 功能描述:MCP16301 HIGH VOLTAGE CUK LED DRIVER BOARD - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:BOARD EVAL ANALOG MCP16301 制造商:Microchip Technology Inc 功能描述:MCP16301 High Voltage Cuk LED Driver Board, DEVTOOL - Analog |
| ARD00455 | 功能描述:MCP39F501 - Power Management, Energy/Power Meter Evaluation Board 制造商:microchip technology 系列:- 零件状态:有效 主要用途:电源管理，电度表/功率表 嵌入式:- 使用的 IC/零件:MCP39F501 主要属性:- 辅助属性:图形用户界面 所含物品:板，线缆 标准包装:1 |
| ARD00514 | 功能描述:MCP19035 - DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board 制造商:microchip technology 系列:- 零件状态:有效 主要用途:DC/DC，步降 输出和类型:1，非隔离 功率 - 输出:- 电压 - 输出:5V 电流 - 输出:5A 电压 - 输入:8 V ~ 26 V 稳压器拓扑:降压 频率 - 开关:600kHz 板类型:完全填充 所含物品:板 使用的 IC/零件:MCP19035 标准包装:1 |
| ARD00550 | 功能描述:PIC16F1503, UCS1002 - Power Management, Battery Charger Evaluation Board 制造商:microchip technology 系列:- 零件状态:有效 主要用途:电源管理，电池充电器 嵌入式:是，MCU，8 位 使用的 IC/零件:PIC16F1503，UCS1002 主要属性:USB 充电端口 辅助属性:- 所含物品:板 标准包装:1 |
| ARD00598 | 功能描述:MCP1661 - DC/DC, Step Up 1, Isolated Outputs Evaluation Board 制造商:microchip technology 系列:- 零件状态:有效 主要用途:DC/DC，步升 输出和类型:1，隔离 功率 - 输出:- 电压 - 输出:5V 电流 - 输出:200mA 电压 - 输入:4.25 V ~ 5.25 V 稳压器拓扑:回扫 频率 - 开关:500kHz 板类型:完全填充 所含物品:板 使用的 IC/零件:MCP1661 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。