- 您现在的位置：买卖IC网 > PDF目录295073 > ARJ22A03X RF RELAY, DPDT, LATCHED, 0.05A (COIL), 3VDC (COIL), 150mW (COIL), 0.3A (CONTACT), 30VDC (CONTACT), 5000MHz, 1W (RF INPUT), SURFACE MOUNT-STRAIGHT PDF资料下载
参数资料
| 型号： | ARJ22A03X |
| 元件分类： | 射频继电器 |
| 英文描述： | RF RELAY, DPDT, LATCHED, 0.05A (COIL), 3VDC (COIL), 150mW (COIL), 0.3A (CONTACT), 30VDC (CONTACT), 5000MHz, 1W (RF INPUT), SURFACE MOUNT-STRAIGHT |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 4/5页 |
| 文件大小： | 223K |
| 代理商： | ARJ22A03X |
RJ (ARJ)
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 20 ms to set/reset the latching type
relay.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
3. External magnetic eld
Since RJ relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
eld. Avoid using the relay under that
condition.
4. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
relays to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that alcoholic solvents
be used.
5. Tape and reel packing
1) Tape dimensions
2) Dimensions of plastic reel
6. Conditions for operation, transport
and storage conditions
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
(1) Temperature:
–30 to +70
°C –22 to +158°F
(However, tolerance range is –30 to
+60
°C –22 to +140°F if package is
carried as is.)
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
(3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage:
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0
°C 32°F. This causes
problems such as sticking of movable
parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
5) Storage procedures for surface-mount
terminal types
Since the relay is very sensitive to
humidity, it is packed in humidity-free,
hermetically sealed packaging. When
storing the relay, be careful of the
following points:
(1) Be sure to use the relay immediately
after removing it from its sealed package.
(2) When storing the relay for long
periods of time after removing it from its
sealed package, we recommend using a
humidity-free bag with silica gel to
prevent subjecting the relay to humidity.
Furthermore, if the relay is solder
mounted when it has been subjected to
excessive humidity, cracks and leaks can
occur. Be sure to mount the relay under
the required mounting conditions.
7. Soldering
1) Surface-mount terminal
In case of automatic soldering, the
following conditions should be observed
(1) Position of measuring temperature
(2) IR (infrared reow) soldering method
Temperature rise of relay itself may vary
according to the mounting level or the
heating method of reow equipment.
Therefore, please set the temperature of
soldering portion of relay terminal and
the top surface of the relay case not to
exceed the above mentioned soldering
condition.
It is recommended to check the
temperature rise of each portion under
actual mounting condition before use.
2) Standard PC board terminal
Please meet the following conditions if
this relay is to be automatically soldered.
(1) Preheating: Max. 120
°C 248°F
(terminal solder surface) for max. 120
seconds
(2) Soldering: Max. 260±5
°C 500±9°F for
max. 6 seconds
The effect on the relay depends on the
actual substrate used. Please verify the
substrate to be used.
Moisture-proof packaging enables RJ
relay’s standard PCB type capable for
reow soldering.
Please contact us in the case of reow
soldering considerations.
3) Hand soldering
Please meet the following conditions if
this relay is to be soldered by hand.
(1) Wattage: 30 to 60 W
(2) Tip temperature/time: 280 to 300
°C
536 to 572
°F for max. 5 seconds
The effect on the relay depends on the
actual substrate used. Please verify the
substrate to be used.
4) Avoid high frequency cleaning since
this may adversely affect relay
characteristics. Use alcohol-based
cleaning solutions when cleaning relays.
8.5
.335
8.8
.346
.630
16.0
.079
2.0
.370
9.4
0.4
.016
24.0
±0.3
.945
±.012
11.5
.453
1.75
.069
4.0
.157
14.4
.567
dia.
.059
+.004
0
dia.
1.5
+0.1
0
Z type
X type
Tape coming out direction
Relay polarity bar
RJ relay
(General tolerance:
±0.1 ±.004)
24.4
+2.0
0
.961
+.079
0
2.0±0.2
.079±.008
13±0.2 dia.
.512±.008 dia.
.827±.031 dia.
21±0.8 dia.
80±1 dia.
3.150±.039 dia.
380±2 dia.
14.961±.079 dia.
.079±.020
2.0±0.5
Temperature,
°C °F
85
5
0
32
70
158
–30
–22
(Avoid
condensation
when used at
temperatures
higher than
0
°C 32°F)
Humidity, %R.H.
Tolerance range
(Avoid freezing
when used at
temperatures
lower than
0
°C 32°F)
Surface of PC board where relay is mounted.
t1
t2
T3
T2
T1
T1 = 150 to 180
°C 302 to 356°F
T2 = 230
°C 446°F and higher
T3 = Within 250
°C 482°F
t1 = 60 to 120 sec.
t2 = Within 30 sec.
MicrowaveDevices.book Page 46 Wednesday, November 26, 2008 7:50 PM
All Rights Reserved C
OPYRIGHT Panasonic Electric Works Co., Ltd.
相关PDF资料 |
PDF描述 |
|---|---|
| ARJ22A12X | RF RELAY, DPDT, LATCHED, 0.013A (COIL), 12VDC (COIL), 150mW (COIL), 0.3A (CONTACT), 30VDC (CONTACT), 5000MHz, 1W (RF INPUT), SURFACE MOUNT-STRAIGHT |
| ARJ22A24X | RF RELAY, DPDT, LATCHED, 0.006A (COIL), 24VDC (COIL), 150mW (COIL), 0.3A (CONTACT), 30VDC (CONTACT), 5000MHz, 1W (RF INPUT), SURFACE MOUNT-STRAIGHT |
| ARV12N12 | RF COAXIAL RELAY, SPDT, LATCHED, 0.058A (COIL), 12VDC (COIL), 700mW (COIL), 8000MHz, 30W (RF INPUT), THROUGH HOLE-STRAIGHT MOUNT |
| ARV12N24Q | RF COAXIAL RELAY, SPDT, LATCHED, 0.029A (COIL), 24VDC (COIL), 700mW (COIL), 8000MHz, 30W (RF INPUT), THROUGH HOLE-STRAIGHT MOUNT |
| ARV12N24 | RF COAXIAL RELAY, SPDT, LATCHED, 0.029A (COIL), 24VDC (COIL), 700mW (COIL), 8000MHz, 30W (RF INPUT), THROUGH HOLE-STRAIGHT MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ARJ22A03Z | 制造商:NAIS 制造商全称:Nais(Matsushita Electric Works) 功能描述:SMD RELAYS WITH 8GHz CAPABILITIES |
| ARJ22A03ZJ | 制造商:Panasonic Electric Works 功能描述: |
| ARJ22A12 | 功能描述:高频/射频继电器 5GHZ DPDT 12VDC 2 COIL LATCH SMD RoHS:否 制造商:Omron Electronics 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 VDC 线圈类型:Non-Latching 频率: 功耗:100 mW 端接类型:Solder Terminal 绝缘:20 dB to 30 dB at 1 GHz 介入损耗:0.2 dB at 1 GHz |
| ARJ22A12J | 制造商:Panasonic Electric Works 功能描述: |
| ARJ22A12X | 功能描述:高频/射频继电器 2 Form C, 12VDC 10mA 10VDC 50ohms 2 RoHS:否 制造商:Omron Electronics 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 VDC 线圈类型:Non-Latching 频率: 功耗:100 mW 端接类型:Solder Terminal 绝缘:20 dB to 30 dB at 1 GHz 介入损耗:0.2 dB at 1 GHz |
发布紧急采购，3分钟左右您将得到回复。