参数资料
| 型号： | ARX1112 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | RELAY RF SPDT 500MA 12V |
| 其它有关文件： | Standards Chart |
| 产品变化通告： | RX, RX-P Relays Discontinuation Mar/2012 |
| 标准包装： | 50 |
| 系列： | ARX |
| 继电器类型： | RF |
| 线圈类型： | 锁存，单线圈 |
| 线圈电流： | 16.7mA |
| 线圈电压： | 12VDC |
| 触点形式： | SPDT（1 C 型） |
| 触点额定值（电流）： | 500mA |
| 切换电压： | 30VDC - 最小值 |
| 关闭电压（最大）： | 9 VDC |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 管件 |
| 触点材料： | 镀金 |
| 操作时间： | 10ms |
| 释放时间： | 6ms |
| 线圈功率： | 200 mW |
| 线圈电阻： | 720 欧姆 |
| 工作温度： | -40°C ~ 70°C |
RX (ARX)
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. lf it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 30 ms to set/reset the latching type
relay.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
3. External magnetic ?eld
Since RX relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
?eld. Avoid using the relay under that
6. Conditions for operation, transport
and storage conditions
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
(1) Temperature:
–40 to +70°C –40 to +158°F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
(3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage:
Humidity, %RH
85
Tolerance range
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
7. Latching relay
In order to assure proper operating
regardless of changes in the ambient
usage temperature and usage conditions,
nominal operating voltage should be
applied to the coil for more than 30 ms to
set/reset the latching type relay.
For general cautions for use, please
refer to the “General Application
Guidelines”.
condition.
4. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
(Avoid freezing
when used at
temperatures lower
than 0 ° C 32 ° F
5
(Avoid
condensation
when used at
temperatures higher
than 0 ° C 32 ° F
ultrasonic cleaning which subjects the
–40
–40
0
+32
70
+158
relays to high frequency vibrations, which
may cause the contacts to stick.
lt is recommended that a ?uorinated
hydrocarbon or other alcoholic solvents
be used.
5. Soldering
The manual soldering shall be performed
under following condition.
Max. 260°C 500°F 10s
Max. 350°C 662°F 3s
In addition, when soldering the case to
the PC board, the plating may swell
depending on the soldering conditions.
Temperature, ° C ° F
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0°C 32°F . This causes
problems such as sticking of movable
parts or operational time lags.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB74E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| 432215-10-0 | TERM BARRIER 10CIRC 1 ROW .4375 |
| MF-NSMF150-2 | PTC RESETTABLE 1.50A 6V 1206 |
| 432210-10-0 | TERM BARRIER 10CIRC 1 ROW .4375 |
| ARX1106 | RELAY RF SPDT 500MA 6V |
| 432203-10-0 | TERM BARRIER 10CIRC 1 ROW .4375 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ARX1112J | 制造商:Panasonic Electric Works 功能描述: |
| ARX1124 | 功能描述:低信号继电器 - PCB RELAY 1-LATCH 24VDC 2.5GHZ RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| ARX1124J | 制造商:Panasonic Electric Works 功能描述: |
| ARX114H | 功能描述:低信号继电器 - PCB 1 Form C, 4.5VDC RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| ARX114HJ | 制造商:Panasonic Electric Works 功能描述: |
发布紧急采购，3分钟左右您将得到回复。