- 您现在的位置：买卖IC网 > Datasheet目录961 > AS1115 DB-YELLOW (ams)BOARD DEMO AS1115 YELLOW Datasheet资料下载
参数资料
| 型号： | AS1115 DB-YELLOW |
| 厂商： | ams |
| 文件页数： | 19/26页 |
| 文件大小： | 0K |
| 描述： | BOARD DEMO AS1115 YELLOW |
| 标准包装： | 1 |
| 输出及类型： | 8，非隔离 |
| 特点： | 64 LED + 16 键，I²C |
| 输入电压： | 2.7 ~ 5.5 V |
| 已供物品： | 板 |
| 已用 IC / 零件： | AS1115 |
AS1115
Datasheet - D e t a i l e d D e s c r i p t i o n
Feature Register (0x0E)
The Feature Register is used for enabling various features including switching the device into external clock mode, applying an external reset,
selecting code-B or HEX decoding, enabling or disabling blinking, setting the blinking rate, and resetting the blink timing.
Note: At power-up the Feature Register is initialized to 0.
Table 20. Feature Register Summary
D7
blink_
start
D6
sync
D5
blink_
freq_sel
D4
blink_en
D3
NU
D2
decode_sel
D1
reg_res
D0
clk_en
Table 21. Feature Register Bit Descriptions (Address (HEX) = 0xXE)
Addr: 0xXE
Feature Register
Enables and disables various device features.
Bit
Bit Name
Default
Access
Bit Description
External clock active.
D0
clk_en
0 R/W
0 = Internal oscillator is used for system clock.
1 = Pin CLK of the serial interface operates as system clock input.
Resets all control registers except the Feature Register.
0 = Reset Disabled. Normal operation.
D1
reg_res
0 R/W
1 = All control registers are reset to default state (except the Feature Register)
identically after power-up.
Note: The Digit Registers maintain their data.
Selects display decoding for the selected digits ( Table 8 on page 13 ).
D2
decode_sel
0 R/W
0 = Enable Code-B decoding (see Table 9 on page 14 ).
1 = Enable HEX decoding (see Table 10 on page 14 ).
D3
NU
Not used
D4
blink_en
0 R/W
Enables blinking.
0 = Disable blinking. 1 = Enable blinking.
Sets blink with low frequency (with the internal oscillator enabled):
D5
blink_freq_sel
0 R/W
0 = Blink period typically is 1 second (0.5s on, 0.5s off).
1 = Blink period is 2 seconds (1s on, 1s off).
Synchronizes blinking on the rising edge of pin LD/CS. The multiplex and blink timing
D6
sync
0 R/W
counter is cleared on the rising edge of pin LD/CS. By setting this bit in multiple devices,
the blink timing can be synchronized across all the devices.
Start Blinking with display enabled phase. When bit D4 (blink_en) is set, bit D7
D7
blink_start
0 R/W
determines how blinking starts.
0 = Blinking starts with the display turned off.
1 = Blinking starts with the display turned on.
Revision 1.08
18 - 25
相关PDF资料 |
PDF描述 |
|---|---|
| AS1116 DB-YELLOW | BOARD DEMO AS1116 YELLOW |
| AS3691A EB | BOARD EVAL AS3691A |
| AS5030 DB | BOARD DEMO AS5030 |
| AS5048-DB-1.0 | BOARD DEMO AS5048 |
| AS5215 DB | BOARD DEMO AS5215 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AS1115M | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Positive Adjustable Voltage Regulator |
| AS1115M3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| AS1115M3-1.5 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| AS1115M3-2.5 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| AS1115M3-3.0 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
发布紧急采购，3分钟左右您将得到回复。