- 您现在的位置：买卖IC网 > PDF目录17129 > AS5306/B DB (ams)BOARD DEMO AS5306 PDF资料下载
参数资料
| 型号： | AS5306/B DB |
| 厂商： | ams |
| 文件页数： | 7/15页 |
| 文件大小： | 0K |
| 描述： | BOARD DEMO AS5306 |
| 标准包装： | 1 |
| 传感器类型： | 霍尔效应 |
| 传感范围： | 5mT 跳闸，60mT 释放 |
| 电源电压： | 电池，9V |
| 嵌入式： | 否 |
| 已供物品： | 2 个板，电池，夹具，磁条 |
| 已用 IC / 零件： | AS5306/B |
AS5304/AS5306 Integrated Hall IC for linear and off-axis rotary motion detection
7
Incremental Quadrature AB Output
The digital output is compatible to optical incremental
S
N
S
N
S
encoder outputs. Direction of rotation is encoded into
two signals A and B that are phase-shifted by 90o.
Depending on the direction of rotation, A leads B
(CW) or B leads A (CCW).
7.1.1
Index Pulse
A
40
1
2
40
1
2
A single index pulse is generated once for every pole
pair. One pole pair is interpolated to 40 quadrature
pulses (160 steps), so one index pulse is generated
B
40
1
2
40
1
2
The Index output is switched to Index = high, when a
magnet is placed over the Hall array as shown in
placed over the left side of the IC (top view, pin#1 at
bottom left) and the south pole is placed over the
right side of the IC.
The index output will switch back to Index = low,
when the magnet is moved by one LSB from position
X=0 to X=X1, as shown in Figure 7, bottom graph.
One LSB is 25μm for AS5304 and 15μm for AS5306.
Index
Detail:
A
B
Index
Note: Since the small step size of 1 LSB is hardly
recognizable in a correctly scaled graph it is shown as an
Step #
157 158 159
0
1
2
3
4
5
Figure 6:
Quadrature A / B and Index output
7.1.2
Magnetic Field Warning Indicator
The AS5304 can also provide a low magnetic field warning to indicate a missing magnet or when the end of the magnetic strip
has been reached. This condition is indicated by using a combination of A, B and Index, that does not occur in normal
operation:
A low magnetic field is indicated with:
Index = high
A=B=low
7.1.3
Vertical Distance between Magnet and IC
The recommended vertical distance between magnet and IC depends on the strength of the magnet and the length of the
magnetic pole.
Typically, the vertical distance between magnet and chip surface should not exceed ? of the pole length.
That means for AS5304, having a pole length of 2.0mm, the maximum vertical gap should be 1.0mm,
For the AS5306, having a pole length of 1.2mm, the maximum vertical gap should be 0.6mm
These figures refer to the chip surface. Given a typical distance of 0.2mm between chip surface and IC package surface,
the recommended vertical distances between magnet and IC surface are therefore:
AS 5304: ≤ 0.8mm
AS 5306: ≤ 0.4mm
Revision 1.9
www.ams.com
Page 6 of 14
相关PDF资料 |
PDF描述 |
|---|---|
| ECA18DTBN | CONN EDGECARD 36POS R/A .125 SLD |
| EMM06DRYS | CONN EDGECARD 12POS DIP .156 SLD |
| D-SCE-1K-38-50-9 | HEAT SHRINK SLEEVE MARKER |
| VE-J02-EZ | CONVERTER MOD DC/DC 15V 25W |
| D-SCE-1K-38-50-4 | HEAT SHRINK SLEEVE MARKER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AS5306-DK-1.0 | 制造商:ams 功能描述:Demo Board |
| AS5306-TS_EK_AB | 功能描述:AS5306A, AS5306B - Magnetic, Linear, Rotary Position Sensor Evaluation Board 制造商:ams 系列:- 零件状态:有效 传感器类型:磁性，线性，旋转位置 感应范围:- 接口:- 灵敏度:- 电压 - 电源:- 嵌入式:- 所含物品:板 使用的 IC/零件:AS5306A，AS5306B 标准包装:1 |
| AS5306-TS_EK_DB | 功能描述:AS5306A, AS5306B - Magnetic, Linear, Rotary Position Sensor Evaluation Board 制造商:ams 系列:- 零件状态:有效 传感器类型:磁性，线性，旋转位置 感应范围:- 接口:模拟 灵敏度:- 电压 - 电源:4.5 V ~ 5.5 V 嵌入式:- 所含物品:板 使用的 IC/零件:AS5306A，AS5306B 标准包装:1 |
| AS53090FLF | 制造商:TT Electronics / IRC 功能描述:AS53090FLF |
| AS53090HLF | 制造商:TT Electronics / IRC 功能描述:AS53090HLF |
发布紧急采购，3分钟左右您将得到回复。