- 您现在的位置：买卖IC网 > Datasheet目录60 > AS5510-DWLT (ams)IC ENCODER MAGNETIC LIN 6-WLCSP Datasheet资料下载
参数资料
| 型号： | AS5510-DWLT |
| 厂商： | ams |
| 文件页数： | 12/19页 |
| 文件大小： | 248K |
| 描述： | IC ENCODER MAGNETIC LIN 6-WLCSP |
| 标准包装： | 12,000 |
| 传感范围： | ±50mT |
| 类型： | 线性 |
| 电源电压： | 2.5 V ~ 3.6 V |
| 电流 - 电源： | 3.5mA |
| 电流 - 输出（最大）： | 20mA |
| 输出类型： | 数字式，开漏极 |
| 工作温度： | -30°C ~ 85°C |
| 封装/外壳： | * |
| 供应商设备封装： | * |
| 包装： | * |
www.ams.com/AS5510
Revision 0.1
11 - 18
AS5510
Datasheet - Detailed Description
Figure 7. Data Write - Slave Receiver Mode
Slave Transmitter Mode (Read Mode). The first byte is received and handled as in the slave receiver mode. However, in this mode, the
direction bit indicates that the transfer direction is reversed. Serial data is transmitted on SDA by the AS5510 while the serial clock is input on
SCL. START and STOP conditions are recognized as the beginning and end of a serial transfer (Figure 8 and Figure 9). The slave address byte
is the first byte received after the master generates a START condition. The slave address byte contains the 7-bit AS5510 address. The 7-bit
slave address is followed by the direction bit (R/W), which, for a read, is 1. After receiving and decoding the slave address byte the device
outputs an acknowledge on the SDA line. The AS5510 then begins to transmit data starting with the register address pointed to by the register
pointer. If the register pointer is not written to before the initiation of a read mode the first address that is read is the last one stored in the register
pointer. The AS5510 must receive a not acknowledge to end a read.
Figure 8. Data Read (from Current Pointer Location) - Slave Transmitter Mode
S
1010110
0
A
XXXXXXXX
A
XXXXXXXX
A
XXXXXXXX
NA
S Start
A Acknowledge (ACK)
Data transferred: X+1 Bytes + Acknowledge
P Stop
P
<Slave address>
<Word address (n)>
<Data(n)>
<Data(n+X)>
XXXXXXXX
A
<Data(n+1)>
S
1010110
1
A
XXXXXXXX
A
XXXXXXXX
A
XXXXXXXX
NA
S Start
A Acknowledge (ACK)
Data transferred: X+1 Bytes + Acknowledge
NA Not Acknowledge (NACK)
Note: Last data byte is followed by NACK
P Stop
P
<Slave address>
<Data(n)>
<Data(n+1)>
<Data(n+X)>
XXXXXXXX
A
<Data(n+2)>
相关PDF资料 |
PDF描述 |
|---|---|
| ATS137-PL-B-B | IC HALL SENSOR SGL 25MA SIP-3L |
| ATS177-PG-B-B | IC HALL SENSOR LATCH 25MA SIP-3L |
| ATS617LSGTN-T | IC HALL EFFECT GEAR SENSOR 4SIP |
| ATS625LSGTN-T | IC SENSOR GEAR TOOTH 4-SIP |
| ATS627LSGTN-T | IC HALL EFFECT GEAR SENSOR 4-SIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AS5510-DWLT-1K | 功能描述:板机接口霍耳效应/磁性传感器 RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
| AS5510-SO_EK_AB | 功能描述:AS5510 - Magnetic, Linear Position Sensor Evaluation Board 制造商:ams 系列:- 零件状态:有效 传感器类型:磁性，线性位置 感应范围:- 接口:I2C 灵敏度:- 电压 - 电源:2.5 V ~ 3.6 V 嵌入式:- 所含物品:板 使用的 IC/零件:AS5510 标准包装:1 |
| AS5510-WL_EK_AB | 功能描述:AS5510 - Magnetic, Linear Position Sensor Evaluation Board 制造商:ams 系列:- 零件状态:有效 传感器类型:磁性，线性位置 感应范围:- 接口:I2C 灵敏度:- 电压 - 电源:2.5 V ~ 3.6 V 嵌入式:- 所含物品:板 使用的 IC/零件:AS5510 标准包装:1 |
| AS5510-WL_EK_DB | 功能描述:AS5510 - Magnetic, Linear Position Sensor Evaluation Board 制造商:ams 系列:- 零件状态:有效 传感器类型:磁性，线性位置 感应范围:- 接口:I2C 灵敏度:- 电压 - 电源:5V USB 或 9V 嵌入式:是，MCU，8 位 所含物品:板 使用的 IC/零件:AS5510 标准包装:1 |
| AS55110FLF | 制造商:TT Electronics / IRC 功能描述:AS55110FLF |
发布紧急采购，3分钟左右您将得到回复。