参数资料
| 型号： | ASX220A4H |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | RELAY TELECOM DPDT 10MA 4.5V |
| 其它有关文件： | Relay Technical Info Standards Chart |
| 产品目录绘图： | ASX Series SMD ASX 2 Coil Footprint ASX 2 Coil Circuit |
| 标准包装： | 40 |
| 系列： | ASX |
| 继电器类型： | 电信 |
| 线圈类型： | 锁存，双线圈 |
| 线圈电流： | 15.6mA |
| 线圈电压： | 4.5VDC |
| 触点形式： | DPDT（2 C 型） |
| 触点额定值（电流）： | 10mA |
| 切换电压： | 10VDC - 最小值 |
| 关闭电压（最大）： | 3.6 VDC |
| 安装类型： | 表面贴装 |
| 端接类型： | 鸥翼型 |
| 包装： | 管件 |
| 触点材料： | 银钯（AgPd），金（Au） |
| 操作时间： | 5ms |
| 释放时间： | 5ms |
| 线圈功率： | 70 mW |
| 线圈电阻： | 289 欧姆 |
| 工作温度： | -40°C ~ 70°C |
| 产品目录页面： | 2601 (CN2011-ZH PDF) |
| 其它名称： | 255-1595 255-1595-5 255-1595-5-ND 255-1595-ND 255-2722 |
SX (ASX)
2. Speci?cations
Characteristics
Contact
Rating
Item
Arrangement
Static contact resistance
(During initial and electric life tests)
Dynamic contact resistance
(During initial and electric life tests)
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)* 1
Single side stable
Speci?cations
2 Form C
Max. 100 m ? (By voltage drop of 20 mV 1 mA [1kHz])
(By nominal switching capacity: No. of operations: 10 7 )
Max. 1 ? (By voltage drop of 20 mV 1 mA [1 kHz], Measurement delay 10 ms after applying
nominal coil voltage) (By nominal switching capacity: No. of operations: 10 7 )
Stationary contact: AgPd+Au clad Movable contact: AgPd
10 mA 10 V DC (resistive load)
0.1 W (resistive load)
10 V DC
10 mA DC
10 μ A 1 mV DC
50mW (1.5 to 12 V DC), 70mW (24 V DC)
Nominal operating
power
1 coil latching
35mW (1.5 to 12 V DC), 50mW (24 V DC)
2 coil latching
Insulation resistance (Initial)
Between open contacts
70mW (1.5 to 12 V DC), 150mW (24 V DC)
Min. 10,000M ? (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
750 Vrms for 1min. (Detection current: 10mA)
Breakdown voltage
(Initial)
Surge breakdown
Between contact and coil
Between contact sets
Between open contacts
1,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10 × 160 μ s) (FCC Part 68)
Electrical
characteristics
voltage (Initial) Between contacts and coil
Temperature rise (at 20 ° C 68 ° F )
Operate time [Set time] (at 20 ° C 68 ° F )
Release time [Reset time] (at 20 ° C 68 ° F )
2,500 V (2 × 10 μ s) (Telcordia)
Max. 50 ° C
(By resistive method, nominal coil voltage applied to the coil; contact carrying current:
10mA.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Mechanical
characteristics
Expected life
Thermal
electromotive force
Shock resistance
Vibration resistance
Mechanical
Electrical
Functional
Destructive
Functional
Destructive
Min. 750 m/s 2 (Half-wave pulse of sine wave: 6 ms; detection time: 10 μ s.)
Min. 1,000 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 5 mm
Min. 5 × 10 7 (at 750 cpm)
Min. 10 7 (10 mA 10 V DC resistive load) (at 750 cpm)
Max. 3 μ V (at nominal voltage applied to the coil)
Conditions
Conditions for operation, transport and storage* 2
Ambient temperature: –40 ° C to +70 ° C –40 ° F to +158 ° F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Max. operating speed (at rated load)
750 cpm
Approx. 2 g .071 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
REFERENCE DATA
1. Switching capacity range
10mA
2-(1). Change in dynamic contact resistance
(10 mA 10 V DC resistive load)
Tested sample: ASX20012, 10 pcs.
Operating speed: 750 cpm
Measured condition: 10 ms after applying nominal coil
voltage, using voltage drop of 20 mV, 1 mA, 1 kHz.
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
2-(2). Change in dynamic contact resistance
(10 μ A 1 mV DC resistive load)
Tested sample: ASX20012, 10 pcs.
Operating speed: 750 cpm
Measured condition: 10 ms after applying nominal coil
voltage, using voltage drop of 20 mV, 1 mA, 1 kHz.
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
No. of operations, × 10
10 μ A
1mV
10V
Contact voltage
0.1
0
0
No. of operations, × 10 4
Max.
Min.
1,000
0.1
0
0
Max.
Min.
1,000 2,000
4
ALL RIGHTS RESERVED ? C OPYRIGHT PANASONIC ELECTRIC WORKS CO., LTD.
相关PDF资料 |
PDF描述 |
|---|---|
| 433603-11-0 | TERM BARRIER 11CIRC 1 ROW .4375 |
| 433602-11-0 | TERM BARRIER 11CIRC 1 ROW .4375 |
| 4310R-101-822 | RES ARRAY 8.2K OHM 9 RES 10-SIP |
| 433315-11-0 | TERM BARRIER 11CIRC 1 ROW .4375 |
| 433310-11-0 | TERM BARRIER 11CIRC 1 ROW .4375 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ASX220A4HJ | 制造商:Panasonic Electric Works 功能描述: |
| ASX220A4HZ | 功能描述:低信号继电器 - PCB RELAY SW 2-LATCH 4.5VDC 10MA SMD RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| ASX340AT2C00XPED0 | 制造商:Aptina Imaging 功能描述: |
| ASX340AT2C00XPED0-DPBR1 | 功能描述:SENSOR IMAGE MONO CMOS 48-ILCC 制造商:on semiconductor 系列:- 零件状态:在售 类型:CMOS 像素尺寸:5.6μm x 5.6μm 有源像素阵列:720H x 560V 每秒帧数:60 电压 - 电源:1.8V，2.8V 工作温度:-40°C ~ 105°C 标准包装:260 |
| ASX340AT2C00XPED0-DRBR1 | 功能描述:SENSOR IMAGE MONO CMOS 48-ILCC 制造商:on semiconductor 系列:- 零件状态:在售 类型:CMOS 像素尺寸:5.6μm x 5.6μm 有源像素阵列:720H x 560V 每秒帧数:60 电压 - 电源:1.8V，2.8V 工作温度:-40°C ~ 105°C 标准包装:260 |
发布紧急采购，3分钟左右您将得到回复。