参数资料
型号: AT 100 B420L
厂商: LEM USA Inc
文件页数: 2/3页
文件大小: 0K
描述: SENSOR CURRENT 100A 24V MOD
标准包装: 1
系列: AT
电流 - 感应: 100A
精确度: ±1.5%
传感器类型: 开环
电源电压: 20 V ~ 30 V
输出: 4 ~ 20mA
频率: 50/60Hz
响应时间: <100ms
电极标记: 双向
工作温度: -20°C ~ 60°C
封装/外壳: 模块
包装: 散装
其它名称: U2.05.34.000.0
Current Transducer AT-B420L
Isolation characteristics
V b
Rated isolation voltage rms 2)
with IEC 61010-1 standards and following conditions:
300
V
- Reinforced isolation
- Over voltage category CAT III
- Pollution degree PD2
V d
dCp
dCl
CTI
- Heterogeneous field
Rms voltage for AC isolation test 3) , 50Hz, 1min.
Creepage distance
Clearance distance
Comparative tracking index (Group I)
3.5
6
6
600
kV
mm
mm
Notes : 2) If insulated cable is used for the primary circuit, the voltage category could
be improved according to the primary cable insulation category (please
refer to the cable manufacturer ’s indications)
3) between primary (completely filling the hole) and secondary.
Safety and warning notes
In order to guarantee safe operation of the transducer and to be able to make proper use of all features and functions, please
read these instructions thoroughly!
Safe operation can only be guaranteed if the transducer is used for the purpose it has been designed for and within the limits of
the technical specifications.
Ensure you get up-to-date technical information that can be found in the latest associated datasheet under www.lem.com.
Caution! Risk of danger
Ignoring the warnings can lead to serious injury and/or cause damage!
The electric measuring transducer may only be installed and put into operation by qualified personnel that have
rceived an appropriate training.
The corresponding national regulations shall be observed during installation and operation of the transducer and
any electrical conductor.
The transducer shall be used in electric/electronic equipment with respect to applicable standards and safety
rquirements and in accordance with all the related systems and components manufacturers’ operating
instructions.
Caution! Risk of electrical shock
When operating the transducer, certain parts of the module may carry hazardous live voltage (e.g. primary
conductor, power supply).
The user shall ensure to take all measures necessary to protect against electrical shock.
The transducer is a built-in device containing conducting parts that shall not be accessible after installation.
A protective enclosure or additional insulation barrier may be necessary.
The transducer shall not be put into operation if the jaw opening is open (split core version) or the installation is
not completed.
Installation and maintenance shall be done with the main power supply disconnected except if there are no
hazardous live parts in or in close proximity to the system and if the applicable national regulations are fully
observed.
Safe and trouble-free operation of this transducer can only be guaranteed if transport, storage and installation are carried out
correctly and operation and maintenance are carried out with care.
Page 2/3
090609/6
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
www.lem.com
相关PDF资料
PDF描述
F1827DH400 MODULE SCR/DIODE 25A 120VAC
D3V-165-1C25 SWITCH LEVER 16A SPDT .250 QC
F1827CCH600 MODULE SCR/DIODE 25A 240VAC
F1827CCH400 MODULE SCR/DIODE 25A 120VAC
DHR 1000 C420 SENSOR CURRENT 1000A 50V MOD
相关代理商/技术参数
参数描述
AT100D 制造商:Atlas Sound 功能描述:Decora Style 70V Volume Control with White and Ivory Plates - 100W
AT-100V 制造商:HRS 制造商全称:HRS 功能描述:Fixed Attenuators Up to 2 W Power
AT101 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC
AT-101 制造商:Hirose 功能描述:
AT-101(40) 功能描述:衰减器 -互连 RoHS:否 制造商:Pomona Electronics 最大衰减: 容差: 频率范围:DC to 500 MHz 阻抗:50 Ohms 功率额定值:2 W 端接类型:Crimp 连接器类型:BNC Male / Female 工作温度范围:0 C to + 102 C