- 您现在的位置：买卖IC网 > PDF目录18840 > AT 150 B10 (LEM USA Inc)SENSOR CURRENT 150A MOD PDF资料下载
参数资料
| 型号： | AT 150 B10 |
| 厂商： | LEM USA Inc |
| 文件页数： | 2/3页 |
| 文件大小： | 0K |
| 描述： | SENSOR CURRENT 150A MOD |
| 标准包装： | 1 |
| 系列： | AT |
| 电流 - 感应： | 150A |
| 精确度： | ±1.5% |
| 传感器类型： | 开环 |
| 输出： | 0 ~ 10 V |
| 频率： | 50/60Hz |
| 响应时间： | <300ms |
| 电极标记： | 双向 |
| 工作温度： | -20°C ~ 60°C |
| 封装/外壳： | 模块 |
| 包装： | 散装 |
| 其它名称： | U2.05.39.200.0 |
Current Transducer AT-B10
Isolation characteristics
V b
Rated isolation voltage rms 1)
with IEC 61010-1 standards and following conditions:
300
V
- Reinforced isolation
- Over voltage category CAT III
- Pollution degree PD2
V d
dCp
dCl
CTI
- Heterogeneous field
Rms voltage for AC isolation test 2) , 50Hz, 1min.
Creepage distance
Clearance distance
Comparative tracking index (Group I)
3.5
6
6
600
kV
mm
mm
Notes : 1) If insulated cable is used for the primary circuit, the isolation voltage
category can be improved according to the primary cable insulation
category (please refer to the cable manufacturer ’s indications)
2) between primary (completely filling the hole) and secondary.
Safety and warning notes
In order to guarantee safe operation of the transducer and to be able to make proper use of all features and functions, please
read these instructions thoroughly!
Safe operation can only be guaranteed if the transducer is used for the purpose it has been designed for and within the limits of
the technical specifications.
Ensure you get up-to-date technical information that can be found in the latest associated datasheet under www.lem.com.
Caution! Risk of danger
Ignoring the warnings can lead to serious injury and/or cause damage!
The electric measuring transducer may only be installed and put into operation by qualified personnel that have
rceived an appropriate training.
The corresponding national regulations shall be observed during installation and operation of the transducer and
any electrical conductor.
The transducer shall be used in electric/electronic equipment with respect to applicable standards and safety
rquirements and in accordance with all the related systems and components manufacturers’ operating
instructions.
Caution! Risk of electrical shock
When operating the transducer, certain parts of the module may carry hazardous live voltage (e.g. primary
conductor, power supply).
The user shall ensure to take all measures necessary to protect against electrical shock.
The transducer is a built-in device containing conducting parts that shall not be accessible after installation.
A protective enclosure or additional insulation barrier may be necessary.
The transducer shall not be put into operation if the jaw opening is open (split core version) or the installation is
not completed.
Installation and maintenance shall be done with the main power supply disconnected except if there are no
hazardous live parts in or in close proximity to the system and if the applicable national regulations are fully
observed.
Safe and trouble-free operation of this transducer can only be guaranteed if transport, storage and installation are carried out
correctly and operation and maintenance are carried out with care.
Page 2/3
090609/6
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
www.lem.com
相关PDF资料 |
PDF描述 |
|---|---|
| AT 100 B5 | SENSOR CURRENT 100A 30V MOD |
| B512FS-2T | MOD DIODE SCR 25A 240VAC .250"QC |
| AT 100 B10 | SENSOR CURRENT 100A MOD |
| B512FS-2 | MOD DIODE SCR 25A 240VAC ISO QC |
| B652-2T | MOD DIODE SCR 42.5A 240V .250"QC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT150B420 | 制造商:LEM Holdings SSA 功能描述:CURRENT SENSOR AT 150 B420 |
| AT1511 | 制造商:AIMTRON 制造商全称:AIMTRON 功能描述:FET BIAS CONTROLLER AND TONE DETECTION |
| AT1511R | 制造商:AIMTRON 制造商全称:AIMTRON 功能描述:FET BIAS CONTROLLER AND TONE DETECTION |
| AT1511R-GRE | 制造商:AIMTRON 制造商全称:AIMTRON 功能描述:FET BIAS CONTROLLER AND TONE DETECTION |
| AT1512 | 制造商:AIMTRON 制造商全称:AIMTRON 功能描述:FET BIAS CONTROLLER AND TONE DETECTION |
发布紧急采购，3分钟左右您将得到回复。