- 您现在的位置：买卖IC网 > PDF目录19896 > AT17LV002-10JC (Atmel)IC SRL CONFG EEPROM 2M LV 20PLCC PDF资料下载
参数资料
| 型号： | AT17LV002-10JC |
| 厂商： | Atmel |
| 文件页数： | 26/26页 |
| 文件大小： | 0K |
| 描述： | IC SRL CONFG EEPROM 2M LV 20PLCC |
| 标准包装： | 50 |
| 可编程类型： | 串行 EEPROM |
| 存储容量： | 2Mb |
| 电源电压： | 3 V ~ 3.6 V，4.75 V ~ 5.25 V |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 20-LCC（J 形引线） |
| 供应商设备封装： | 20-PLCC |
| 包装： | 管件 |
9
2321I–CNFG–2/08
AT17LV65/128/256/512/010/002/040
7.
Cascading Serial Configuration EEPROMs
For multiple FPGAs configured as a daisy-chain, or for FPGAs requiring larger configuration
memories, cascaded configurators provide additional memory.
After the last bit from the first configurator is read, the clock signal to the configurator asserts its
CEO output Low and disables its DATA line driver. The second configurator recognizes the Low
level on its CE input and enables its DATA output.
After configuration is complete, the address counters of all cascaded configurators are reset if
the RESET/OE on each configurator is driven to its active (Low) level.
If the address counters are not to be reset upon completion, then the RESET/OE input can be
tied to its inactive (High) level.
The AT17LV65 devices do not have the CEO feature to perform cascaded configurations.
8.
AT17LV Series Reset Polarity
The AT17LV series configurator allows the user to program the reset polarity as either
RESET/OE or RESET/OE. This feature is supported by industry-standard programmer
algorithms.
9.
Programming Mode
The programming mode is entered by bringing SER_EN Low. In this mode the chip can be pro-
grammed by the Two-Wire serial bus. The programming is done at V
CC supply only.
Programming super voltages are generated inside the chip.
10. Standby Mode
The AT17LV series configurators enter a low-power standby mode whenever CE is asserted
High. In this mode, the AT17LV65/128/256 configurator consumes less than 50 A of current at
3.3V (100 A for the AT17LV512/010 and 200 A for the AT17LV002/040). The output remains
in a high-impedance state regardless of the state of the OE input.
相关PDF资料 |
PDF描述 |
|---|---|
| 345-140-520-201 | CONN CARDEDGE 140POS DL .100X.20 |
| EYM10DTAD-S189 | CONN EDGECARD 20POS R/A .156 SLD |
| TAP476K010SCS | CAP TANT 47UF 10V 10% RADIAL |
| CDRH125/LDNP-100NC | POWER INDUCTOR 10UH 4.6A SMD |
| NCV8509PDW25G | IC REG LDO 5V/2.5V 16-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT17LV002-10JI | 功能描述:FPGA-配置存储器 CONFIG SERIAL EEPROM 2M 3.3V - 10 MHZ RoHS:否 制造商:Altera Corporation 存储类型:Flash 存储容量:1.6 Mbit 工作频率:10 MHz 电源电压-最大:5.25 V 电源电压-最小:3 V 电源电流:50 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PLCC-20 |
| AT17LV002-10JU | 功能描述:FPGA-配置存储器 CONFIG SERIAL EEPROM 2M 3.3V-10 MHZ RoHS:否 制造商:Altera Corporation 存储类型:Flash 存储容量:1.6 Mbit 工作频率:10 MHz 电源电压-最大:5.25 V 电源电压-最小:3 V 电源电流:50 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PLCC-20 |
| AT17LV002-10NC | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:FPGA Configuration EEPROM Memory |
| AT17LV002-10NI | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:FPGA Configuration EEPROM Memory |
| AT17LV002-10PC | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:FPGA Configuration EEPROM Memory |
发布紧急采购，3分钟左右您将得到回复。