- 您现在的位置：买卖IC网 > PDF目录20487 > AT24C02A-10TU-1.8 (Atmel)IC EEPROM 2KBIT 400KHZ 8TSSOP PDF资料下载
参数资料
| 型号： | AT24C02A-10TU-1.8 |
| 厂商： | Atmel |
| 文件页数： | 10/20页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 2KBIT 400KHZ 8TSSOP |
| 标准包装： | 100 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 2K (256 x 8) |
| 速度： | 100kHz，400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.8 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 8-TSSOP |
| 包装： | 管件 |
Read Operations
Read operations are initiated the same way as write operations with the exception that
the read/write select bit in the device address word is set to “1”. There are three read
operations: current address read, random address read and sequential read.
CURRENT ADDRESS READ: The internal data word address counter maintains the
last address accessed during the last read or write operation, incremented by one. This
address stays valid between operations as long as the chip power is maintained. The
address “roll over” during read is from the last byte of the last memory page to the first
byte of the first page. The address “roll over” during write is from the last byte of the cur-
rent page to the first byte of the same page.
Once the device address with the read/write select bit set to “1 ” is clocked in and
acknowledged by the EEPROM, the current address data word is serially clocked out.
The microcontroller does not respond with an input “0” but does generate a following
stop condition, see Figure 10.
Figure 10. Current Address Read
S
T
A
R
T
DEVICE
ADDRE SS
R
E
A
D
S
T
O
P
S DA LINE
M
S
B
L R A
S / C
B W K
DATA
N
O
A
C
K
RANDOM READ: A random read requires a “dummy” byte write sequence to load in the
data word address. Once the device address word and data word address are clocked
in and acknowledged by the EEPROM, the microcontroller must generate another start
condition. The microcontroller now initiates a current address read by sending a device
address with the read/write select bit high. The EEPROM acknowledges the device
address and serially clocks out the data word. The microcontroller does not respond
with a “0” but does generate a following stop condition, see Figure 11.
Figure 11. Random Read
S
T
A
R
T
DEVICE
ADDRE SS
W
R
I
T
E
WORD
ADDRE SS n
S
T
A
R
T
DEVICE
ADDRE SS
R
E
A
D
S
T
O
P
S DA LINE
M
S
B
L R A M
S / C S
B W K B
L A
S C
B K
M
S
B
L
S
B
A
C
K
DATA n
N
O
A
C
K
DUMMY WRITE
SEQUENTIAL READ: Sequential reads are initiated by either a current address read or
a random address read. After the microcontroller receives a data word, it responds with
an acknowledge. As long as the EEPROM receives an acknowledge, it will continue to
increment the data word address and serially clock out sequential data words. When the
memory address limit is reached, the data word address will “roll over” and the sequen-
10
AT24C02A/04A
0976Q–SEEPR–8/05
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B2L-CW-F3 | CONVERTER MOD DC/DC 28V 100W |
| MIC4420CN | IC DRIVER MOSFET 6A LO SIDE 8DIP |
| VI-B2L-CW-F1 | CONVERTER MOD DC/DC 28V 100W |
| VI-B2K-CX-F3 | CONVERTER MOD DC/DC 40V 75W |
| F951C476MBAAQ2 | CAP TANT 47UF 16V 20% 1210 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT24C02A-10TU-2.7 | 功能描述:IC EEPROM 2KBIT 400KHZ 8TSSOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:96 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:16M（2M x 8，1M x 16） 速度:70ns 接口:并联 电源电压:2.65 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽） 供应商设备封装:48-TSOP 包装:托盘 |
| AT24C02AN-10SC | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:2-Wire Serial EEPROM |
| AT24C02AN-10SC-1.8 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:2-Wire Serial EEPROM |
| AT24C02AN-10SC-2.5 | 制造商:Atmel Corporation 功能描述:Serial EEPROM, 256 x 8, 8 Pin, Plastic, SOP |
| AT24C02AN-10SC-2.7 | 功能描述:电可擦除可编程只读存储器 2/4/8/16K 2-Wire Bus RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。