参数资料
| 型号： | AT24C1024BW-SH25-T |
| 厂商： | Atmel |
| 文件页数： | 10/25页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 1MBIT 1MHZ 8SOIC |
| 标准包装： | 1 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 1M (128K x 8) |
| 速度： | 1MHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.209"，5.30mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 剪切带 (CT) |
| 其它名称： | AT24C1024BW-SH25-TCT |
Once the device address with the read/write select bit set to one is clocked in and acknowledged
by the EEPROM, the current address data word is serially clocked out. The microcontroller does
not respond with an input zero but does generate a following stop condition (see Figure 7-4 on
page 11 ).
RANDOM READ: A random read requires a “dummy” byte write sequence to load in the data
word address. Once the device address word and data word address are clocked in and
acknowledged by the EEPROM, the microcontroller must generate another start condition. The
microcontroller now initiates a current address read by sending a device address with the
read/write select bit high. The EEPROM acknowledges the device address and serially clocks
out the data word. The microcontroller does not respond with a zero but does generate a follow-
ing stop condition (see Figure 7-5 on page 12 ).
SEQUENTIAL READ: Sequential reads are initiated by either a current address read or a ran-
dom address read. After the microcontroller receives a data word, it responds with an
acknowledge. As long as the EEPROM receives an acknowledge, it will continue to increment
the data word address and serially clock out sequential data words. When the memory address
limit is reached, the data word address will “roll over” and the sequential read will continue. The
sequential read operation is terminated when the microcontroller does not respond with a zero,
but does generate a following stop condition (see Figure 7-6 on page 12 ).
10
AT24C1024B
5194F–SEEPR–1/08
相关PDF资料 |
PDF描述 |
|---|---|
| 10039452-00001LF | PLASTIC HOOD-SUB FOR D-SUB |
| APA450-PQ208A | IC FPGA PROASIC+ 450K 208-PQFP |
| IDT71V124SA12YG8 | IC SRAM 1MBIT 12NS 32SOJ |
| M1AGL1000V5-FG484I | IC FPGA 1KB FLASH 1M 484-FBGA |
| M1AGL1000V5-FGG484I | IC FPGA 1KB FLASH 1M 484-FBGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT24C1024BW-SH25-T | 制造商:Atmel Corporation 功能描述:Serial EEPROM IC |
| AT24C1024BW-SH-B | 功能描述:电可擦除可编程只读存储器 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT24C1024BW-SH-T | 功能描述:电可擦除可编程只读存储器 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT24C1024BY7-YH25-T | 功能描述:电可擦除可编程只读存储器 8-EIAJ 2.5V NiPdAu 2.5V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT24C1024BY7-YH-T | 功能描述:电可擦除可编程只读存储器 1.8V - NiPdAu 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。