- 您现在的位置：买卖IC网 > PDF目录20402 > AT24C256BN-SH-B (Atmel)IC EEPROM 256KBIT 1MHZ 8SOIC PDF资料下载
参数资料
| 型号： | AT24C256BN-SH-B |
| 厂商： | Atmel |
| 文件页数： | 11/24页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 256KBIT 1MHZ 8SOIC |
| 标准包装： | 100 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 256K (32K x 8) |
| 速度： | 400kHz，1MHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.8 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
AT24C256B
7. Read Operations
Read operations are initiated the same way as write operations with the exception that the
read/write select bit in the device address word is set to “1”. There are three read operations:
current address read, random address read, and sequential read.
CURRENT ADDRESS READ: The internal data word address counter maintains the last
address accessed during the last read or write operation, incremented by one. This address
stays valid between operations as long as the chip power is maintained. The address “roll over”
during read is from the last byte of the last memory page, to the first byte of the first page.
Once the device address with the read/write select bit set to “1” is clocked in and acknowledged
by the EEPROM, the current address data word is serially clocked out. The microcontroller does
not respond with an input “0” but does generate a following stop condition (see Figure 7-1 ).
Figure 7-1.
Current Address Read
RANDOM READ: A random read requires a “dummy” byte write sequence to load in the data
word address. Once the device address word and data word address are clocked in and
acknowledged by the EEPROM, the microcontroller must generate another start condition. The
microcontroller now initiates a current address read by sending a device address with the
read/write select bit high. The EEPROM acknowledges the device address and serially clocks
out the data word. The microcontroller does not respond with a “0” but does generate a following
stop condition (see Figure 7-2 ).
Figure 7-2.
Random Read
Note:
* = DON’T CARE bit
11
5279C–SEEPR–3/09
相关PDF资料 |
PDF描述 |
|---|---|
| S1G-13 | RECTIFIER GPP SMD 400V 1A SMA |
| GEC25DRYH | CONN EDGECARD 50POS DIP .100 SLD |
| 346-080-522-201 | CARDEDGE 80POS DUAL .125 GREEN |
| AT24C256B-PU | IC EEPROM 256KBIT 1MHZ 8DIP |
| SBG1045CT-F | DIODE SCHOTTKY 10A 45V CC D2PAK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT24C256BN-SH-T | 功能描述:电可擦除可编程只读存储器 PB/HALO FREE 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT24C256B-PU | 功能描述:电可擦除可编程只读存储器 PB/HALO FREE 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT24C256B-TH-B | 功能描述:电可擦除可编程只读存储器 PB/HALO FREE 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT24C256B-TH-T | 功能描述:电可擦除可编程只读存储器 PB/HALO FREE 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT24C256BU2-10UU-1.8 | 制造商:Atmel Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。