参数资料
型号: AT25320W-10SC-2.7
厂商: Atmel
文件页数: 6/21页
文件大小: 0K
描述: IC EEPROM 32KBIT 3MHZ 8SOIC
标准包装: 94
格式 - 存储器: EEPROMs - 串行
存储器类型: EEPROM
存储容量: 32K (4K x 8)
速度: 2.1MHz,3MHz
接口: SPI 3 线串行
电源电压: 2.7 V ~ 5.5 V
工作温度: 0°C ~ 70°C
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SOIC
包装: 管件
Serial Interface
Description
MASTER: The device that generates the serial clock.
SLAVE: Because the Serial Clock pin (SCK) is always an input, the AT25080/160/320/640
always operates as a slave.
TRANSMITTER/RECEIVER: The AT25080/160/320/640 has separate pins designated for
data transmission (SO) and reception (SI).
MSB: The Most Significant Bit (MSB) is the first bit transmitted and received.
SERIAL OP-CODE: After the device is selected with CS going low, the first byte will be
received. This byte contains the op-code that defines the operations to be performed.
INVALID OP-CODE: If an invalid op-code is received, no data will be shifted into the
AT25080/160/320/640, and the serial output pin (SO) will remain in a high impedance state
until the falling edge of CS is detected again. This will reinitialize the serial communication.
CHIP SELECT: The AT25080/160/320/640 is selected when the CS pin is low. When the
device is not selected, data will not be accepted via the SI pin, and the serial output pin (SO)
will remain in a high impedance state.
HO LD: The HOL D pin is use d in conjunctio n with th e CS pin to select th e
AT25080/160/320/640. When the device is selected and a serial sequence is underway,
HOLD can be used to pause the serial communication with the master device without resetting
the serial sequence. To pause, the HOLD pin must be brought low while the SCK pin is low.
To resume serial communication, the HOLD pin is brought high while the SCK pin is low (SCK
may still toggle during HOLD). Inputs to the SI pin will be ignored while the SO pin is in the
high impedance state.
WRITE PROTECT: The write protect pin (WP) will allow normal read/write operations when
held high. When the WP pin is brought low and WPEN bit is “1”, all write operations to the sta-
tus register are inhibited. WP going low while CS is still low will interrupt a write to the status
register. If the internal write cycle has already been initiated, WP going low will have no effect
on any write operation to the status register. The WP pin function is blocked when the WPEN
bit in the status register is “0”. This will allow the user to install the AT25080/160/320/640 in a
system with the WP pin tied to ground and still be able to write to the status register. All WP
pin functions are enabled when the WPEN bit is set to “1”.
6
AT25080/160/320/640
0675M–SEEPR–9/03
相关PDF资料
PDF描述
T95V475K016CSAL CAP TANT 4.7UF 16V 10% 1410
AT25320W-10SC IC EEPROM 32KBIT 3MHZ 8SOIC
NR6020T1R5N INDUCTOR 1.5UH 3.2A 30% SMD
AT25256W-10SI-2.7 IC EEPROM 256KBIT 3MHZ 8SOIC
AT25256W-10SI-1.8 IC EEPROM 256KBIT 2.1MHZ 8SOIC
相关代理商/技术参数
参数描述
AT25320W-10SI 功能描述:IC EEPROM 32KBIT 3MHZ 8SOIC RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:378 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:8M(1M x 8,512K x 16) 速度:110ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:48-CBGA 供应商设备封装:48-CBGA(7x7) 包装:托盘
AT25320W-10SI-2.7 功能描述:IC EEPROM 32KBIT 3MHZ 8SOIC RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:378 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:8M(1M x 8,512K x 16) 速度:110ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:48-CBGA 供应商设备封装:48-CBGA(7x7) 包装:托盘
AT-2532-ST-R 功能描述:扬声器与变频器 PZ RA PCMNT 3200H RoHS:否 制造商:PUI Audio 产品:Speakers 类型:Electromagnetic 频率:900 Hz to 12 kHz 声压级:88 dBA 阻抗:8 Ohms 功率额定值:1.2 W 形状:Round 端接类型:Solder Pad 直径:15 mm 长度: 宽度: 深度:4.4 mm 磁体材料:Neodymium Iron Boran (NdFeB) 圆锥体材料:Mylar
AT-255 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:3Volt Voltage Variable Attenuator 25 dB, DC - 2.5 GHz
AT-255_1 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:3 Volt Voltage Variable Attenuator 25 dB, DC-2.5 GHz