- 您现在的位置：买卖IC网 > Datasheet目录312 > AT25HP512W2-10SI-2.7 SL383 (Atmel)IC EEPROM 512KBIT 10MHZ 16SOIC Datasheet资料下载
参数资料
| 型号： | AT25HP512W2-10SI-2.7 SL383 |
| 厂商： | Atmel |
| 文件页数： | 9/21页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 512KBIT 10MHZ 16SOIC |
| 标准包装： | 3,000 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 512K (64K x 8) |
| 速度： | 5MHz，10MHz |
| 接口： | SPI 3 线串行 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 带卷 (TR) |
| 其它名称： | AT25HP512W210SI27 |
AT25HP256/512
Table 7. Read Status Register Bit Definition
Bit
Bit 0 (RDY)
Bit 1 (WEN)
Bit 2 (BP0)
Bit 3 (BP1)
Definition
Bit 0 = “0” (RDY) indicates the device is ready. Bit 0 = “1” indicates the write
cycle is in progress.
Bit 1= “0” indicates the device is not write-enabled. Bit 1 = “1” indicates the
device is write-enabled.
See Table 8.
See Table 8.
Bits 4-6 are “0”s when device is not in an internal write cycle.
Bit 7 (WPEN)
See Table 9.
Bits 0-7 are “1”s during an internal write cycle.
WRITE STATUS REGISTER (WRSR): The WRSR instruction allows the user to select
one of four levels of protection. The AT25HP256/512 is divided into four array seg-
ments. Top quarter (1/4), top half (1/2), or all of the memory segments can be protected.
Any of the data within any selected segment will therefore be READ only. The block
write protection levels and corresponding status register control bits are shown in Table
8.
The three bits, BP0, BP1, and WPEN are nonvolatile cells that have the same properties
and functions as the regular memory cells (e.g., WREN, t WC , RDSR).
Table 8. Block Write Protect Bits
Status Register Bits
Array Addresses Protected
Level
0
1(1/4)
2(1/2)
3(All)
BP1
0
0
1
1
BP0
0
1
0
1
AT25HP256/512
None
6000 - 7FFF/C000 - FFFF
4000 - 7FFF/8000 - FFFF
0000 - 7FFF/0000 - FFFF
The WRSR instruction also allows the user to enable or disable the write protect (WP)
pin through the use of the write protect enable (WPEN) bit. Hardware write protection is
enabled when the WP pin is low and the WPEN bit is “1”. Hardware write protection is
disabled when either the WP pin is high or the WPEN bit is “0.” When the device is hard-
ware write protected, writes to the status register, including the block protect bits and the
WPEN bit, and the block-protected sections in the memory array are disabled. Writes
are only allowed to sections of the memory which are not block-protected.
NOTE: When the WPEN bit is hardware write protected, it cannot be changed back to
“0” as long as the WP pin is held low.
Table 9. WPEN Operation
WPEN
0
0
1
WP
X
X
Low
WEN
0
1
0
ProtectedBlocks
Protected
Protected
Protected
UnprotectedBlocks
Protected
Writable
Protected
Status Register
Protected
Writable
Protected
9
1113L–SEEPR–3/06
相关PDF资料 |
PDF描述 |
|---|---|
| AT26DF081A-SSU | IC FLASH 8MBIT 70MHZ 8SOIC |
| AT26DF161-SU | IC FLASH 16MBIT 66MHZ 8SOIC |
| AT26DF161A-MU | IC FLASH 16MBIT 70MHZ 8QFN |
| AT26DF321-SU | IC FLASH 32MBIT 66MHZ 8SOIC |
| AT27BV010-90JU | IC OTP 1MBIT 90NS 32PLCC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT25HP512W2-10SU-1.8 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:SPI Serial EEPROMs |
| AT25HP512W210SU2.7 | 功能描述:IC EEPROM 512KBIT 10MHZ 16SOIC 制造商:microchip technology 系列:- 零件状态:停產 存储器类型:非易失 存储器格式:EEPROM 技术:EEPROM 存储容量:512Kb （64K x 8） 时钟频率:10MHz 写周期时间 - 字，页:10ms 存储器接口:SPI 电压 - 电源:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C（TA） 基本零件编号:AT25HP512 标准包装:3,000 |
| AT25HP512W2-10SU-2.7 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:SPI Serial EEPROMs |
| AT25HV | 功能描述:整流器/与可变电容器 PTFE Dielectric 750V 1.0 to 23.0pF RoHS:否 制造商:Xicon 电容范围:2.8 pF to 12.5 pF 容差: 电压额定值:200 V 工作温度范围:- 35 C to + 85 C 端接类型:SMD/SMT 产品:Trimmer Capacitors - Ceramic Dielectric |
| AT25LHV | 功能描述:整流器/与可变电容器 750Votls 1.0pF-23pF RoHS:否 制造商:Xicon 电容范围:2.8 pF to 12.5 pF 容差: 电压额定值:200 V 工作温度范围:- 35 C to + 85 C 端接类型:SMD/SMT 产品:Trimmer Capacitors - Ceramic Dielectric |
发布紧急采购，3分钟左右您将得到回复。