参数资料
型号: AT32UC3C264C-A2UR
厂商: Atmel
文件页数: 4/110页
文件大小: 0K
描述: IC MCU AVR32 64K FLASH 64TQFP
产品培训模块: AVR® UC3 Introduction
标准包装: 1
系列: AVR®32 UC3 C
核心处理器: AVR
芯体尺寸: 32-位
速度: 66MHz
连通性: CAN,以太网,I²C,IrDA,LIN,SPI,UART/USART,USB
外围设备: 欠压检测/复位,DMA,I²S,POR,PWM,WDT
输入/输出数: 45
程序存储器容量: 64KB(64K x 8)
程序存储器类型: 闪存
RAM 容量: 16K x 8
电压 - 电源 (Vcc/Vdd): 3 V ~ 5.5 V
数据转换器: A/D 11x12b,D/A 2x12b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 64-TQFP
包装: 标准包装
其它名称: AT32UC3C264C-A2URDKR
101
32117DS–AVR-01/12
AT32UC3C
10.2
rev D
10.2.1
ADCIFA
1
ADCREFP/ADCREFN can not be selected as an external ADC reference by setting the
ADCIFA.CFG.EXREF bit to one
Fix/Workaround
A vo lt ag e r e f e r e n c e ca n b e a p p lie d on A D CREFP/ADC REFN pins if the
ADCIFA.CFG.EXREF bit is set to zero, the ADCIFA.CFG.RS bit is set to zero and the volt-
age reference applied on ADCREFP/ADCREFN pins is higher than the internal 1V
reference.
10.2.2
AST
1
AST wake signal is released one AST clock cycle after the BUSY bit is cleared
After writing to the Status Clear Register (SCR) the wake signal is released one AST clock
cycle after the BUSY bit in the Status Register (SR.BUSY) is cleared. If entering sleep mode
directly after the BUSY bit is cleared the part will wake up immediately.
Fix/Workaround
Read the Wake Enable Register (WER) and write this value back to the same register. Wait
for BUSY to clear before entering sleep mode.
10.2.3
aWire
1
aWire MEMORY_SPEED_REQUEST command does not return correct CV
The aWire MEMORY_SPEED_REQUEST command does not return a CV corresponding to
the formula in the aWire Debug Interface chapter.
Fix/Workaround
Issu e
a
d u m m y
r e a d
to
a d d r es s
0 x 10 00 00 00 0
be for e
issu in g
th e
MEMORY_SPEED_REQUEST command and use this formula instead:
10.2.4
GPIO
1
Clearing Interrupt flags can mask other interrupts
When clearing interrupt flags in a GPIO port, interrupts on other pins of that port, happening
in the same clock cycle will not be registered.
Fix/Workaround
Read the PVR register of the port before and after clearing the interrupt to see if any pin
change has happened while clearing the interrupt. If any change occurred in the PVR
between the reads, they must be treated as an interrupt.
10.2.5
Power Manager
1
Clock Failure Detector (CFD) can be issued while turning off the CFD
While turning off the CFD, the CFD bit in the Status Register (SR) can be set. This will
change the main clock source to RCSYS.
Fix/Workaround
Solution 1: Enable CFD interrupt. If CFD interrupt is issues after turning off the CFD, switch
back to original main clock source.
Solution 2: Only turn off the CFD while running the main clock on RCSYS.
fsab
7
faw
CV 3
-----------------
=
相关PDF资料
PDF描述
LTC1756EGN#PBF IC SMART CARD INTERFACE 16SSOP
AT89C51IC2-RLRUL IC 8051 MCU 32K FLASH 44-VQFP
ATMEGA645V-8AUR MCU AVR 64KB FLASH 8MHZ 64TQFP
ATMEGA645-16AUR MCU AVR 64KB FLASH 16MHZ 64TQFP
ADV3003ACPZ IC EQUALZR HDMI/DVI TMDS 40LFCSP
相关代理商/技术参数
参数描述
AT32UC3C264C-A2UT 功能描述:32位微控制器 - MCU UC3C 64K FLASH 16K SRAM RoHS:否 制造商:Texas Instruments 核心:C28x 处理器系列:TMS320F28x 数据总线宽度:32 bit 最大时钟频率:90 MHz 程序存储器大小:64 KB 数据 RAM 大小:26 KB 片上 ADC:Yes 工作电源电压:2.97 V to 3.63 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:LQFP-80 安装风格:SMD/SMT
AT32UC3C264C-Z2UR 功能描述:32位微控制器 - MCU 64KB Flash 64QFN (-40oC to 85oC) T&R RoHS:否 制造商:Texas Instruments 核心:C28x 处理器系列:TMS320F28x 数据总线宽度:32 bit 最大时钟频率:90 MHz 程序存储器大小:64 KB 数据 RAM 大小:26 KB 片上 ADC:Yes 工作电源电压:2.97 V to 3.63 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:LQFP-80 安装风格:SMD/SMT
AT32UC3C264C-Z2UT 功能描述:32位微控制器 - MCU 64KB Flash 64QFN (-40oC to 85oC) TRAY RoHS:否 制造商:Texas Instruments 核心:C28x 处理器系列:TMS320F28x 数据总线宽度:32 bit 最大时钟频率:90 MHz 程序存储器大小:64 KB 数据 RAM 大小:26 KB 片上 ADC:Yes 工作电源电压:2.97 V to 3.63 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:LQFP-80 安装风格:SMD/SMT
AT32UC3C264EGS-Z2ZR 制造商:Atmel Corporation 功能描述:32-BIT ATMEL? AVR? MCU - Tape and Reel
AT32UC3C-EK 功能描述:开发板和工具包 - AVR AVR32 Eval Kit for AT32UC3C Series RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V