参数资料
| 型号： | AT42QT1010-MAH |
| 厂商： | Atmel |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | IC SENSR TOUCH/PROX 1CH 8UDFN |
| 标准包装： | 1 |
| 系列： | QTouch™ |
| 类型： | 电容性 |
| 触摸面板接口： | 2 线 |
| 输入数/键： | 1 键 |
| 分辨率（位）： | 9，14 b |
| 评估套件： | * |
| 数据接口： | 串行 |
| 电压基准： | 内部 |
| 电源电压： | 1.8 V ~ 5.5 V |
| 电流 - 电源： | 729µA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-UFDFN 裸露焊盘 |
| 供应商设备封装： | 8-UDFN，USON |
| 包装： | 标准包装 |
| 其它名称： | AT42QT1010-MAHDKR |
The AT42QT1010 and AT42QT1011 have three speed settings:
n
For devices where a quick response is required, a fast response setting is available with a 12.2 ms maximum response time.
n
It is also possible to set up the device for low power consumption, at the expense of a slower response time of up to 88.6 ms.
n
A third option is to synchronize the device to an external clock which makes it possible to synchronize several ICs in the same
device. This technique can be used to enhance noise immunity by syncing to a noise source such as mains. The response time
is then dependent on the external clock.
When the device is in low power mode or when the synchronisation mode is selected, a HeartBeat output
is available. This provides a pulse whilst the device isn’t in detect which can be used to verify the device is
working correctly.
AT42QT1011
Single button or
proximity sensor
No power down, remains
active while touch present
AT42QT1012
Single button or
proximity sensor
Toggle (touch on/off)
functionality
Power down after
congurable time period
AT42QT1010
Single button or
proximity sensor
Prolonged touch
timeout after
60 seconds
Single-Key Touch Controllers
2
The AT42QT1010 and AT42QT1011 are identical apart from their behavior
when the sensor is “in detect” for an extended period.
The AT42QT1010 has a “maximum on” duration of ~ 60s. If there is an ob-
struction on the sensor, the device output will go low after the “maximum
on” detection period, so that subsequent touches can be detected.
The AT42QT1011 has no timer and the device will remain on whilst the
sensor is activate.
Speed Settings
AT42QT1012
The device is similar to the AT42QT1010 and AT42QT1011 but it has touch-on/touch-off (toggle) functionality and a power down
timer.
Auto Off Timers
The QT1012 has a number of options for automatic power down which can be used to conserve power in situations where the
device could be left on inadvertently. There are predefined power down settings which can be used to power the device down after
15 minutes or 60 minutes. There is also the option for no power down timer so the device remains on until touched again.
AT42QT1010 and AT42QT1011
相关PDF资料 |
PDF描述 |
|---|---|
| VE-JWR-MX-F1 | CONVERTER MOD DC/DC 7.5V 75W |
| MS27467T11F98PB | CONN PLUG 6POS STRAIGHT W/PINS |
| MS27467T15B18PC | CONN PLUG 18POS STRAIGHT W/PINS |
| VE-JWP-MX-F4 | CONVERTER MOD DC/DC 13.8V 75W |
| AT42QT1012-MAH | IC SENSR TOUCH/PROX 1CH 8UDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT42QT1010-MAHR | 功能描述:IC SENSR TOUCH/PROX 1CH 8UDFN 制造商:microchip technology 系列:QTouch?? 包装:剪切带（CT） 零件状态:在售 类型:按钮 接近探测:是 输入数:1 LED 驱动器通道:- 接口:- 分辨率:14 b 电压 - 电源:1.8 V ~ 5.5 V 电流 - 电源:378.5μA 工作温度:-40°C ~ 85°C 封装/外壳:8-UFDFN 裸露焊盘 供应商器件封装:8-UDFN，USON 标准包装:1 |
| AT42QT1010-TSHR | 功能描述:电容触摸传感器 One-Channel Touch Sensor IC RoHS:否 制造商:Microchip Technology 电源电压: 通道数量: 封装 / 箱体: 尺寸: 温度范围: |
| AT42QT1010-TSHR QS446 | 功能描述:IC TOUCH SENSOR 1KEY SOT23-6 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 触摸屏控制器 系列:QTouch™ 标准包装:96 系列:- 类型:- 触摸面板接口:- 输入数/键:- 分辨率（位）:- 评估套件:* 数据接口:- 数据速率/采样率 (SPS，BPS):- 电压基准:- 电源电压:- 电流 - 电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| AT42QT1010-TSHR,QS446 | 制造商:Atmel Corporation 功能描述:MICRO CONTROLLER |
| AT42QT1011 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:One-channel Touch Sensor IC |
发布紧急采购，3分钟左右您将得到回复。