- 您现在的位置：买卖IC网 > PDF目录67389 > AT42QT1111-AU (ATMEL CORP) PROXIMITY SENSOR-CAPACITIVE, 0-5V, SQUARE, SURFACE MOUNT PDF资料下载
参数资料
| 型号： | AT42QT1111-AU |
| 厂商： | ATMEL CORP |
| 元件分类： | 速度传感器和接近开关 |
| 英文描述： | PROXIMITY SENSOR-CAPACITIVE, 0-5V, SQUARE, SURFACE MOUNT |
| 封装： | 7 X 7 MM, 1 MM HEIGHT, 0.80 MM PITCH, ROHS COMPLIANT, PLASTIC, MS-026ABA, TQFP-32 |
| 文件页数： | 49/50页 |
| 文件大小： | 637K |
| 代理商： | AT42QT1111-AU |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页当前第49页第50页
8
9571B–AT42–08/10
AT42QT1111-MU/AT42QT1111-AU
3.
Wiring and Parts
3.1
Cs Sample Capacitors
Cs0 – Cs10 are the charge sensing sample capacitors. Normally they are identical in nominal
value. The optimal Cs values depend on the thickness of the panel and its dielectric constant.
Thicker panels require larger values of Cs. Values can be in the range 2.2 nF (for faster
operation) to 33 nF (for best sensitivity); typical values are 4.7 nF to 10 nF.
The value of Cs should be chosen so that a light touch on a key produces a reduction of
~20 to 30 in the key signal value (see Section 6.8 on page 26). The chosen Cs value should
never be so large that the key signals exceed ~1000, as reported by the chip in the debug data.
The Cs capacitors must be X7R or PPS film type, for stability. For consistent sensitivity, they
should have a 10 percent tolerance. Twenty percent tolerance may cause small differences in
sensitivity from key to key and unit to unit. If a key is not used, the Cs capacitor may be omitted.
3.2
Rs Resistors
The series resistors Rs0 – Rs10 are inline with the electrode connections and should be used to
limit electrostatic discharge (ESD) currents and to suppress radio frequency (RF) interference.
Values should be approximately 2 k
to 20 k each; a typical value is 4.7 k.
Although these resistors may be omitted, the device may become susceptible to external noise
or radio frequency interference (RFI). For details of how to select these resistors see the
Application Note QTAN0002, Secrets of a Successful QTouch Design, downloadable from the
Touch Technology area of Atmel’s website, www.atmel.com.
3.3
LED Traces and Other Switching Signals
Digital switching signals near the sense lines can induce transients into the acquired signals,
deteriorating the SNR performance of the device. Such signals should be routed away from the
sensing traces and electrodes, or the design should be such that these lines are not switched
during the course of signal acquisition (bursts).
LED terminals which are multiplexed or switched into a floating state, and which are within, or
physically very near, a key (even if on another nearby PCB) should be bypassed to either Vss or
Vdd with at least a 1 nF capacitor. This is to suppress capacitive coupling effects which can
induce false signal shifts. The bypass capacitor does not need to be next to the LED, in fact it
can be quite distant. The bypass capacitor is noncritical and can be of any type.
LED terminals which are constantly connected to Vss or Vdd do not need further bypassing.
3.4
PCB Cleanliness
Modern no-clean flux is generally compatible with capacitive sensing circuits.
CAUTION: If a PCB is reworked to correct soldering faults relating to the QT1111, or
to any associated traces or components, be sure that you fully understand the nature
of the flux used during the rework process. Leakage currents from hygroscopic ionic
residues can stop capacitive sensors from functioning. If you have any doubts, a
thorough cleaning after rework may be the only safe option.
相关PDF资料 |
PDF描述 |
|---|---|
| AT76C453AC-MY19T | IMAGE SENSOR-CMOS, 708(H) X 494(V) PIXEL, 30fps, SURFACE MOUNT |
| ATF-33143-TR2 | X BAND, Si, N-CHANNEL, RF SMALL SIGNAL, HEMFET |
| ATF-33143-BLK | X BAND, Si, N-CHANNEL, RF SMALL SIGNAL, HEMFET |
| ATF-33143-TR1 | X BAND, Si, N-CHANNEL, RF SMALL SIGNAL, HEMFET |
| ATF-50189 | 0 MHz - 2400 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT42QT1111-AU QS383 | 制造商:Atmel Corporation 功能描述:QTOUCH 11 KEY TOUCH SENSOR IC |
| AT42QT1111MU | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:QTouch? 11-key Sensor IC |
| AT42QT1111-MU | 功能描述:电容触摸传感器 QTouch 11 Key Touch Sensor IC RoHS:否 制造商:Microchip Technology 电源电压: 通道数量: 封装 / 箱体: 尺寸: 温度范围: |
| AT42QT1111-MU QS384 | 制造商:Atmel Corporation 功能描述:QTOUCH 11 KEY TOUCH SENSOR IC |
| AT42QT1244-AU | 功能描述:电容触摸传感器 QMatrix FMEA 24 Key Sensor IC RoHS:否 制造商:Microchip Technology 电源电压: 通道数量: 封装 / 箱体: 尺寸: 温度范围: |
发布紧急采购，3分钟左右您将得到回复。