Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale
of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE
FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING
OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the
contents of this document and reserves the right to make changes to specications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
2008 Atmel Corporation. All
rights reserved.
Atmel, Atmel logo and
combinations thereof,
QTouchTM, QFieldTM, QTwoTM,
QMatrixTM, QSlideTM, QWheelTM,
Two TouchTM, Adjacent Key
SuppressionTM, AKSTM and
others, are registered trademarks
or trademarks of Atmel
Corporation or its subsidiaries.
Other terms and product names
may be trademarks of others.
Rev.: 10610A-AT42-10/08/0M
Headquarters
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel +1-408-441-0311
Fax +1-408-487-2600
International
Atmel Asia
Unit 1-5 & 16, 19/F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Tel +852-2245-6100
Fax +852-2722-1369
Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309,78054
Saint-Quentin-en-
Yvelines Cedex
FRANCE
Tel +33-1-3060-7000
Fax +33-1-3060-7111
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN
Tel +81-3-3523-3551
Fax +81-3-3523-7581
Product Contact
Atmel Touch Technology
Division
1 Mitchell Point, Ensign Way
Hamble, Southampton
Hampshire SO31 4RF
UNITED KINGDOM
Tel +44-23-8056-5600
Fax +44-23-8045-3939
Product Line
touch@atmel.com
Literature Requests
www.atmel.com/literature
Web Site
www.atmel.com
Technical Support
Atmel’s touch technology is backed up by comprehensive technical documentation and support based
on Atmel’s unparalleled experience in the touch sense industry.
We have strong relationships with both materials and service suppliers and we can help you locate all of
the resources you require to get your product to market. Once a design is in place, Atmel will work with
you and its partners to quickly move the product right through from early prototype to full production.
To help you get the result you want Atmel provides:
■
Guaranteed reliability
■
Easy customisation
■
The supply chain exibility required for large projects.
Call us to nd out more.
System Parameters
Technology
Patented spread spectrum charge transfer (transverse mode)
Sensor layers
One layer (Single Touch) or two layers (Two Touch)
Screen minimum edge
wiring
4.5 mm not including bonding area (depends on screen construction technology)
Panel Materials
Plastic, Glass, Composites, Painted Surfaces (low particle density metallic paints
possible)
Panel thickness
1.0 to 2 mm glass - 0.5 to 1.5 mm plastic
QT5320 touchscreen size
Up to 4.3 inches diagonal
QT5480 touchscreen size
Up to 8 inches diagonal
Resolution
10-bit (1024 x 1024)
Screen material
ITO (Indium Tin Oxide)
Host interface
I
2C-compatible slave mode (100 kHz or 400 kHz)
Touch response time
60 msec initially, 15 to 20 msec for updates
Signal processing
Self calibration, auto drift compensation, LCD noise filtering and Adjacent Key
SuppressionTM(AKSTM)
Recommended Operating Conditions
Power supply
+1.8V to +5.5V (2.5V to 5.5V in high speed
mode)
QT5320/5480 ICs – Electrical and Environmental Specications
Environmental Specifications
Operating temperature
-40o to +85oC
Storage temperature
-55o to +125oC
DC Specifications
Supply current (sleep mode)
<2 A @ 3.3V
Supply current (active/touched)
<4900 A @ 3.3V (high speed mode)
Supply current (idle/not touched) <2740 A @ 3.3V (high speed mode)
Package Options
QT5320 32 pins, 5 mm x 5 mm
QFN RoHS compliant
QT5480 49 balls, 5 mm x 5 mm
BGA RoHS compliant
QT5480 44 pins, 7 mm x 7 mm
QFN RoHS compliant
QT5480 44 pins, 10 mm x 10 mm TQFP RoHS compliant
The QT5320 and QT5480 are available in
small packages, required for the use in
handheld applications