- 您现在的位置：买卖IC网 > PDF目录381469 > AT49F002N-90TC (ATMEL CORP) LM48411? Ultra-Low EMI, Filterless, 2.5W, Stereo, Class D Audio Power Amplifier with E 2 S; Package: MICRO SMD; No of Pins: 16 PDF资料下载
参数资料
| 型号： | AT49F002N-90TC |
| 厂商： | ATMEL CORP |
| 元件分类： | DRAM |
| 英文描述： | LM48411? Ultra-Low EMI, Filterless, 2.5W, Stereo, Class D Audio Power Amplifier with E 2 S; Package: MICRO SMD; No of Pins: 16 |
| 中文描述： | 256K X 8 FLASH 5V PROM, 90 ns, PDSO32 |
| 封装： | 8 X 20 MM, PLASTIC, TSOP-32 |
| 文件页数： | 4/20页 |
| 文件大小： | 213K |
| 代理商： | AT49F002N-90TC |
4
3354F–FLASH–2/05
AT49F002A(N)(T)
4.3
Reset
A RESET input pin is provided to ease some system applications. When RESET is at a logic
high level, the device is in its standard operating mode. A low level on the RESET input halts the
present device operation and puts the outputs of the device in a high impedance state. If the
RESET pin makes a high to low transition during a program or erase operation, the operation
may not be successfully completed and the operation will have to be repeated after a high level
is applied to the RESET pin. When a high level is reasserted on the RESET pin, the device
returns to the read or standby mode, depending upon the state of the control inputs. By applying
a 12V ± 0.5V input signal to the RESET pin, the boot block array can be reprogrammed even if
the boot block lockout feature has been enabled (see Boot Block Programming Lockout Over-
ride section). The RESET feature is not available for the AT49F002AN(T).
4.4
Erasure
Before a byte can be reprogrammed, the main memory block or parameter block which contains
the byte must be erased. The erased state of the memory bits is a logical “1”. The entire device
can be erased at one time by using a 6-byte software code. The software chip erase code con-
sists of 6-byte load commands to specific address locations with a specific data pattern (please
refer to the Chip Erase Cycle Waveforms).
After the software chip erase has been initiated, the device will internally time the erase opera-
tion so that no external clocks are required. The maximum time needed to erase the whole chip
is t
EC
. If the boot block lockout feature has been enabled, the data in the boot sector will not be
erased.
4.4.1
Chip Erase
If the boot block lockout has been enabled, the Chip Erase function will erase Parameter
Block 1, Parameter Block 2, Main Memory Block 1-4 but not the boot block. If the Boot Block
Lockout has not been enabled, the Chip Erase function will erase the entire chip. After the full
chip erase the device will return back to read mode. Any command during chip erase will be
ignored.
4.4.2
Sector Erase
As an alternative to a full chip erase, the device is organized into sectors that can be individually
erased. There are two 8K-byte parameter block sections and four main memory blocks. The 8K-
byte parameter block sections and the four main memory blocks can be independently erased
and reprogrammed. The Sector Erase command is a six bus cycle operation. The sector
address is latched on the falling WE edge of the sixth cycle while the 30H data input command is
latched at the rising edge of WE. The sector erase starts after the rising edge of WE of the sixth
cycle. The erase operation is internally controlled; it will automatically time to completion.
相关PDF资料 |
PDF描述 |
|---|---|
| AT49F002N-90TI | 2-Megabit 256K x 8 5-volt Only Flash Memory |
| AT49F002N-90VC | 2-Megabit 256K x 8 5-volt Only Flash Memory |
| AT49F002N-90VI | LM4841 Boomer ® Audio Power Amplifier Series Stereo 2W Amplifiers with DC Volume Control, Transient Free Outputs, and Cap-less Headphone Drive; Package: LLP; No of Pins: 28 |
| AT49F002NT-70JI | 2-Megabit 256K x 8 5-volt Only Flash Memory |
| AT49F002NT-70PC | LM4851 Boomer ® Audio Power Amplifier Series Integrated Audio Amplifier System; Package: MICRO SMD; No of Pins: 18 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT49F002N-90TI | 功能描述:IC FLASH 2MBIT 90NS 32TSOP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:378 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:8M（1M x 8，512K x 16） 速度:110ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:48-CBGA 供应商设备封装:48-CBGA（7x7） 包装:托盘 |
| AT49F002N-90VC | 功能描述:IC FLASH 2MBIT 90NS 32VSOP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:378 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:8M（1M x 8，512K x 16） 速度:110ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:48-CBGA 供应商设备封装:48-CBGA（7x7） 包装:托盘 |
| AT49F002N-90VI | 功能描述:IC FLASH 2MBIT 90NS 32VSOP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:378 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:8M（1M x 8，512K x 16） 速度:110ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:48-CBGA 供应商设备封装:48-CBGA（7x7） 包装:托盘 |
| AT49F002NT | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:2-Megabit 256K x 8 5-volt Only CMOS Flash Memory |
| AT49F002NT-12JC | 功能描述:闪存 256K x 8 (2M bit) RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。