参数资料
型号: AT548
厂商: NKK Switches
文件页数: 15/49页
文件大小: 0K
描述: SMARTSWITCH HOUSING PANEL MOUNT
标准包装: 1
附件类型: 面板安装外壳
适用于相关产品: SmartSwitch? 开关
配用: IS15ABFP4B-ND - SMARTSWITCH STD BLK W/WHITE LED
IS15ABDP4B-ND - SMARTSWITCH STD BLU W/WHITE LED
IS15ABDP4EG-ND - SMARTSWITCH STD YELLOW/BLUE LED
IS15ABDP4E-ND - SMARTSWITCH STD BLUE W/YEL LED
IS15ABCP4EF-ND - SMARTSWITCH STD YEL/GRN LED
IS15ABCP4E-ND - SMARTSWITCH STD LED YELLOW
360-2547-ND - SMARTSWITCH STD YEL RED/GRN LED
360-2332-ND - SMARTSWITCH STANDARD RED/GRN/BLU
360-2330-ND - SMARTSWITCH STD RED/GRN LED
SmartSwitch
TM
ACCESSORIES
AT715 Cable for Connection
(500.0) +50.0
19.685
PRECAUTIONS FOR HANDLING & STORAGE
OLED Rocker
E
Handling
ATTENTION
ELECTROSTATIC
SENSITIVE DEVICES
1. OLED devices are electrostatic sensitive.
2. Signal input under conditions not recommended may cause damage to the OLED unit or deterioration of the display.
Follow directions regarding supply sequences of power and signal voltages.
3. If the OLED panel is broken, avoid touching the contents. Wash off in case of contact to the skin or clothing.
4. Limit operating force to 100.0N maximum, as excessive pressure may damage the display.
5. Under certain actuation conditions, one side of the rocker and the center switch can both send actuation signals.
6. Pixels acquire diminished brightness over time and use, and those most frequently habituated have greater reduction of
brightness than those less used. To minimize this difference, operate OLED unit so that all pixels are used as consistently
as possible.
7. Clean actuator surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using neutral cleanser and
dry with clean cloth. Do not use organic solvent.
Storage
1. Store in original container and away from direct sunlight.
2. Keep away from static electricity.
3. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination.
Panel Mounting
?
Before snapping a switch into the panel, align the
gasket evenly under the bezel of the switch.
Incorrect
Correct
?
When mounting into a panel, apply equal pressure
to sides of bezel and insert parallel to the panel.
Gasket position must be even with no gaps beneath bezel
Gasket secure and flush against bezel
?
?
?
?
After mounting, be sure there are no gaps between switch and panel. Lightly push into panel.
After installing into panel, do not apply excessive force.
After panel installation and wiring is completed, do not apply force horizontally or
vertically from behind panel.
Behind the panel, cut area should be squared. If front of panel is painted, do not allow any paint
to collect in corners of cutout to prevent level mounting.
E16
?
Avoid reinstalling a switch once it has been mounted into panel. This may cause deterioration of
panel sealability.
www.nkk.com
Clean Edges
相关PDF资料
PDF描述
EDLNF155B5R5C CAP SUPER 1.5F 5.5V RADIAL
BQ014D0683J CAP FILM 0.068UF 63VDC RADIAL
764500746 SWITCH BEZEL J11/J21 BLACK
BQ014D0682K CAP FILM 6800PF 63VDC RADIAL
BLM21BD152SN1D FERRITE CHIP 1500 OHM 200MA 0805
相关代理商/技术参数
参数描述
AT-548 制造商:Nihon Dempa Kogyo Co (NDK) 功能描述:Switch,
AT549RBT 制造商:COILCRAFT 制造商全称:Coilcraft lnc. 功能描述:Extreme Temperature Coil
AT5501 制造商:CSR 功能描述:CHIPSET
AT5502MPTR-G1 功能描述:IC REG BUCK 制造商:diodes incorporated 系列:* 零件状态:有效 标准包装:4,000
AT5503MPTR-G1 功能描述:Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 8-SOIC (0.154", 3.90mm Width) Exposed Pad 制造商:diodes incorporated 系列:- 包装:带卷(TR) 零件状态:过期 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入(最小值):4.5V 电压 - 输入(最大值):18V 电压 - 输出(最小值/固定):0.8V 电压 - 输出(最大值):16.2V 电流 - 输出:3A 频率 - 开关:500kHz 同步整流器:是 工作温度:-40°C ~ 85°C(TA) 安装类型:表面贴装 封装/外壳:8-SOIC(0.154",3.90mm 宽)裸焊盘 供应商器件封装:8-PSOP 标准包装:4,000