参数资料
型号: AT88SC101-09ET-XX
英文描述: Sequential Access Serial EEPROM
中文描述: 顺序访问串行EEPROM
文件页数: 5/13页
文件大小: 141K
代理商: AT88SC101-09ET-XX
5
AT88SC0104C
2021BS–SMEM–10/02
Protocol Selection
The AT88SC0104C is compatible with two different communication protocols: asynchro-
nous T = 0 as defined by ISO 7816-3 or synchronous two-wire protocol. The power-up
sequence determines which of the two protocols will be used.
Asynchronous
T = 0 Protocol
The power-up sequence complies with ISO 7816-3 for a cold reset.
V
CC
goes high; RST, I/O-SDA and CLK-SCL are low.
Set I/O-SDA in receive mode.
Provide a clock signal to CLK-SCL.
RST goes high after 400 clock cycles.
The device will respond with a 64-bit ATR code, including historical bytes to indicate the
memory density within the CryptoMemory family. Once the asynchronous mode has
been selected, it is not possible to switch to the synchronous mode without powering off
the device.
Figure 2.
Asynchronous T = 0 Protocol
Synchronous
Two-wire Protocol
The synchronous mode is the default after powering up V
CC
due to the internal pull-up
on RST.
Power-up V
CC
, RST goes high also.
After stable V
CC
, CLK-SCL and I/O-SDA may be driven.
Figure 3.
Synchronous Two-wire Protocol
Note:
Four clock pulses must be sent before the first command is issued.
Vcc
I/O-SDA
RST
CLK-SCL
ATR
Vcc
I/O-SDA
RST
CLK-SCL
1
2
3
4
相关PDF资料
PDF描述
AT88SC101-09ET-XX-2.7 Sequential Access Serial EEPROM
AT88SC102-09AT-XX Sequential Access Serial EEPROM
AT88SC102-09AT-XX-2.7 Sequential Access Serial EEPROM
AT88SC102-09BT-XX Sequential Access Serial EEPROM
AT88SC102-09BT-XX-2.7 Sequential Access Serial EEPROM
相关代理商/技术参数
参数描述
AT88SC101-09ET-XX-2.7 制造商:未知厂家 制造商全称:未知厂家 功能描述:Sequential Access Serial EEPROM
AT88SC102 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Smart Card ICs 1K E2PROM with Security Logic
AT88SC102-09AT-XX 制造商:未知厂家 制造商全称:未知厂家 功能描述:Sequential Access Serial EEPROM
AT88SC102-09AT-XX-2.7 制造商:未知厂家 制造商全称:未知厂家 功能描述:Sequential Access Serial EEPROM
AT88SC102-09BT-XX 制造商:未知厂家 制造商全称:未知厂家 功能描述:Sequential Access Serial EEPROM