- 您现在的位置：买卖IC网 > PDF目录362504 > AT88SC1608-09BT-XX I2C Serial EEPROM PDF资料下载
参数资料
| 型号： | AT88SC1608-09BT-XX |
| 英文描述： | I2C Serial EEPROM |
| 中文描述： | I2C串行EEPROM的 |
| 文件页数： | 6/13页 |
| 文件大小： | 141K |
| 代理商： | AT88SC1608-09BT-XX |
6
AT88SC0104C
2021BS–SMEM–10/02
Communication
Security Modes
Communications between the device and host operate in three basic modes. Standard
mode is the default mode for the device after power-up. Authentication mode is acti-
vated by a successful authentication sequence. Encryption mode is activated by a
successful encryption activation following a successful authentication.
Note:
1. Configuration data include viewable areas of the Configuration Zone except the passwords:
MDC: Modification Detection Code.
MAC: Message Authentication Code.
Security Options
Anti-tearing
In the event of a power loss during a write cycle, the integrity of the device’s stored data
may be recovered. This function is optional: the host may choose to activate the anti-
tearing function, depending on application requirements. When anti-tearing is active,
write commands take longer to execute, since more write cycles are required to com-
plete them, and data are limited to eight bytes.
Data are written first to a buffer zone in EEPROM instead of the intended destination
address, but with the same access conditions. The data are then written in the required
location. If this second write cycle is interrupted due to a power loss, the device will
automatically recover the data from the system buffer zone at the next power-up.
In two-wire mode, the host is required to perform ACK polling for up to 20 ms after write
commands when anti-tearing is active. At power-up, the host is required to perform ACK
polling, in some cases for up to 10 ms, in the event that the device needs to carry out the
data recovery process.
Write Lock
If a user zone is configured in the write lock mode, the lowest address byte of an 8-byte
page constitutes a write access byte for the bytes of that page.
Example
: The write lock byte at $080 controls the bytes from $080 to $087.
The write lock byte may also be locked by writing its least significant (rightmost) bit to
“0”. Moreover, when write lock mode is activated, the write lock byte can only be pro-
grammed — that is, bits written to “0” cannot return to “1”.
In the write lock configuration, only one byte can be written at a time. Even if several
bytes are received, only the first byte will be taken into account by the device.
Table 4.
Communication Security Modes
(1)
Mode
Configuration Data
User Data
Passwords
Data Integrity Check
Standard
Clear
Clear
Clear
MDC
(1)
Authentication
Clear
Clear
Encrypted
MAC
(1)
Encryption
Clear
Encrypted
Encrypted
MAC
(1)
$080
$081
$082
$083
$084
$085
$086
$087
@
11011001
xxxx xxxx
locked
xxxx xxxx
locked
xxxx xxxx
xxxx xxxx
xxxx xxxx
locked
xxxx xxxx
xxxx xxxx
$80
相关PDF资料 |
PDF描述 |
|---|---|
| AT88SC1608-09BT-XX-2.7 | I2C Serial EEPROM |
| AT88SC1616C-09CT-XX | EEPROM |
| AT88SC1616C-09CT-XX-2.7 | EEPROM |
| AT88SC1616C-09DT-XX | EEPROM |
| AT88SC1616C-09DT-XX-2.7 | EEPROM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT88SC1608-09BT-XX-2.7 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| AT88SC1608-09CT-XX | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| AT88SC1608-09CT-XX-2.7 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| AT88SC1608-09DT-XX | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| AT88SC1608-09DT-XX-2.7 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
发布紧急采购，3分钟左右您将得到回复。