参数资料
| 型号： | AT91M55800A-33AI |
| 厂商： | Atmel |
| 文件页数： | 7/28页 |
| 文件大小： | 0K |
| 描述： | IC ARM MCU 33MHZ 176-TQFP |
| 标准包装： | 40 |
| 系列： | AT91 |
| 核心处理器： | ARM7 |
| 芯体尺寸： | 16/32-位 |
| 速度： | 33MHz |
| 连通性： | EBI/EMI，SPI，UART/USART |
| 外围设备： | POR，WDT |
| 输入/输出数： | 58 |
| 程序存储器类型： | ROMless |
| RAM 容量： | 8K x 8 |
| 电压 - 电源 (Vcc/Vdd)： | 2.7 V ~ 3.6 V |
| 数据转换器： | A/D 8x10b; D/A 2x10b |
| 振荡器型： | 内部 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 176-TQFP |
| 包装： | 托盘 |
| 配用： | AT91EB55-ND - KIT EVAL FOR ARM AT91M55800A |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
15
1745FS–ATARM–18-Apr-06
AT91M55800A Summary
In order to benefit the most regarding the separation of NRST and NTRST during the Debug
phase of development, the user must independently manage both signals as shown in exam-
ple (1) of Figure 7-1 above. However, once Debug is completed, both signals are easily
managed together during production as shown in example (2) of Figure 7-1 above.
7.4.3
Watchdog Reset
The watchdog can be programmed to generate an internal reset. In this case, the reset has
the same effect as the NRST pin assertion, but the BMS and NTRI pins are not sampled. Boot
Mode and Tri-state Mode are not updated. If the NRST pin is asserted and the watchdog trig-
gers the internal reset, the NRST pin has priority.
7.5
Emulation Functions
7.5.1
Tri-state Mode
The AT91M55800A provides a Tri-state Mode, which is used for debug purposes. This
enables the connection of an emulator probe to an application board without having to desol-
der the device from the target board. In Tri-state Mode, all the output pin drivers of the
AT91M55800A microcontroller are disabled.
To enter Tri-state Mode, the NTRI pin must be held low during the last 10 clock cycles before
the rising edge of NRST. For normal operation the NTRI pin must be held high during reset, by
a resistor of up to 400K Ohm.
NTRI is multiplexed with I/O line PA18 and USART 1 serial data transmit line TXD1.
Standard RS232 drivers generally contain internal 400K Ohm pull-up resistors. If TXD1 is con-
nected to a device not including this pull-up, the user must make sure that a high level is tied
on NTRI while NRST is asserted.
7.5.2
JTAG/ICE Debug Mode
ARM Standard Embedded In-Circuit Emulation is supported via the JTAG/ICE port. It is con-
nected to a host computer via an external ICE Interface. The JTAG/ICE debug mode is
enabled when JTAGSEL is low.
In ICE Debug Mode the ARM Core responds with a non-JTAG chip ID which identifies the core
to the ICE system. This is not JTAG compliant.
7.5.3
IEEE 1149.1 JTAG Boundary-scan
JTAG Boundary-scan is enabled when JTAGSEL is high. The functions SAMPLE, EXTEST
and BYPASS are implemented. There is no JTAG chip ID. The Special Function module pro-
vides a chip ID which is independent of JTAG.
It is not possible to switch directly between JTAG and ICE operations. A chip reset must be
performed (NRST and NTRST) after JTAGSEL is changed.
7.6
Memory Controller
The ARM7TDMI processor address space is 4G bytes. The memory controller decodes the
internal 32-bit address bus and defines three address spaces:
Internal memories in the four lowest megabytes
Middle space reserved for the external devices (memory or peripherals) controlled by the
EBI
相关PDF资料 |
PDF描述 |
|---|---|
| 20FMN-BMT-A-TF | CONN FMN HSNG 20POS SNGL NOR SMD |
| AT91M42800A-33CI | IC ARM7 MCU 144 BGA |
| 18FMN-BMT-A-TF | CONN FMN HSNG 18POS SNGL NOR SMD |
| AT91M42800A-33AI | IC ARM7 MCU 144 TQFP |
| 17FMN-BMT-A-TF | CONN FMN HSNG 17POS SNGL NOR SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT91M55800A-33AU | 功能描述:ARM微控制器 - MCU LQFP IND TEMP RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT |
| AT91M55800A-33CI | 功能描述:IC ARM MCU 33MHZ 176-BGA RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:AT91 标准包装:9 系列:87C 核心处理器:8051 芯体尺寸:8-位 速度:40/20MHz 连通性:UART/USART 外围设备:POR，WDT 输入/输出数:32 程序存储器容量:32KB（32K x 8） 程序存储器类型:OTP EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:- 振荡器型:内部 工作温度:0°C ~ 70°C 封装/外壳:40-DIP（0.600"，15.24mm） 包装:管件 |
| AT91M55800A-33CI SL383 | 功能描述:IC ARM MCU 16BIT 176BGA RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:AT91 标准包装:1,500 系列:AVR® ATtiny 核心处理器:AVR 芯体尺寸:8-位 速度:16MHz 连通性:I²C，LIN，SPI，UART/USART，USI 外围设备:欠压检测/复位，POR，PWM，温度传感器，WDT 输入/输出数:16 程序存储器容量:8KB（4K x 16） 程序存储器类型:闪存 EEPROM 大小:512 x 8 RAM 容量:512 x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:A/D 11x10b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 包装:带卷 (TR) |
| AT91M55800A-33CI-T | 功能描述:IC MCU 32BIT ROMLESS 176LFBGA 制造商:microchip technology 系列:AT91 包装:带卷（TR） 零件状态:停產 核心处理器:ARM7? 核心尺寸:16/32-位 速度:33MHz 连接性:EBI/EMI，SPI，UART/USART 外设:POR，WDT I/O 数:58 程序存储容量:- 程序存储器类型:ROMless EEPROM 容量:- RAM 容量:8K x 8 电压 - 电源（Vcc/Vdd）:2.7 V ~ 3.6 V 数据转换器:A/D 8x10b；D/A 2x10b 振荡器类型:内部 工作温度:-40°C ~ 85°C（TA） 封装/外壳:176-LFBGA 供应商器件封装:176-LFBGA（11.2x11.2） 基本零件编号:AT91M55800 标准包装:1,000 |
| AT91M55800A-33CJ | 功能描述:ARM微控制器 - MCU BGA IND TEMP RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。