参数资料
| 型号： | AT93C86A-10TU-2.7 |
| 厂商： | Atmel |
| 文件页数： | 6/18页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 16KBIT 2MHZ 8TSSOP |
| 标准包装： | 100 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 16K（2K x 8 或 1K x 16） |
| 速度： | 1MHz，2MHz |
| 接口： | Microwire 3 线串行 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 8-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 1457 (CN2011-ZH PDF) |
250 ns (t CS ). A logic “0” at DO indicates that programming is still in progress. A logic “1”
indicates that the memory location at the specified address has been written with the
data pattern contained in the instruction and the part is ready for further instructions. A
Ready/Busy status cannot be obtained if the CS is brought high after the end of the self-
timed programming cycle t WP .
ERASE ALL (ERAL): The Erase All (ERAL) instruction programs every bit in the mem-
ory array to the logic “1” state and is primarily used for testing purposes. The DO pin
outputs the Ready/Busy status of the part if CS is brought high after being kept low for a
minimum of 250 ns (t CS ). The ERAL instruction is valid only at V CC = 5.0V ± 10%.
WRITE ALL (WRAL) : The Write All (WRAL) instruction programs all memory locations
with the data patterns specified in the instruction. The DO pin outputs the Ready/Busy
status of the part if CS is brought high after being kept low for a minimum of 250 ns (t CS ).
The WRAL instruction is valid only at V CC = 5.0V ± 10%.
ERASE/WRITE DISABLE (EWDS): To protect against accidental data disturbance, the
Erase/Write Disable (EWDS) instruction disables all programming modes and should be
executed after all programming operations. The operation of the READ instruction is
independent of both the EWEN and EWDS instructions and can be executed at any
time.
6
AT93C86A
3408H–SEEPR–1/07
相关PDF资料 |
PDF描述 |
|---|---|
| A3P250L-FGG144 | IC FPGA 1KB FLASH 250K 144-FBGA |
| RMA50DRMS | CONN EDGECARD 100POS .125 SQ WW |
| A3P250L-FG144 | IC FPGA 1KB FLASH 250K 144-FBGA |
| EMC44DRAI-S734 | CONN EDGECARD 88POS .100 R/A PCB |
| M1A3P250-2VQ100I | IC FPGA 1KB FLASH 250K 100-VQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT93C86A-W1.8-11 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Three-wire Serial EEPROM |
| AT93C86AY1-10YU-1.8 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Three-wire Serial EEPROM |
| AT93C86AY1-10YU-1.8 SL383 | 制造商:Atmel Corporation 功能描述:EEPROM SERL-3WIRE 16KBIT 2KX8/1KX16 1.8V/2.5V/3.3V/5V 8MAP - Tape and Reel |
| AT93C86AY6-10YH-1.8 | 功能描述:电可擦除可编程只读存储器 16K 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT93C86AY6-10YH-1.8 SL383 | 制造商:Atmel Corporation 功能描述:EEPROM Serial-3Wire 16K-Bit 2K x 8/1K x 16 2.5V/3.3V/5V 8-Pin UDFN EP T/R 制造商:Atmel Corporation 功能描述:SERIAL EEPROM, 16K (2K X 8 OR 1K X 16), 3-WIRE - 8 UDFN, PB/ - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。