参数资料
型号: ATAVRXPLAIN
厂商: Atmel
文件页数: 3/8页
文件大小: 0K
描述: KIT EVAL FOR ATXMEGA128A1
产品培训模块: MCU Product Line Introduction
XMEGA Introduction
Sensors Xplained
特色产品: ATAVRXPLAIN Evaluation & Demonstration Kit
标准包装: 1
系列: AVR® XMEGA-A1 Xplained
类型: MCU
适用于相关产品: ATXMEGA128A1
所含物品:
相关产品: ATXMEGA128A1-C7U-ND - MCU AVR 128K FLASH 1.6V 100VFBGA
ATXMEGA128A1-CU-ND - MCU AVR 128K FLASH 1.6V 100-CBGA
ATXMEGA128A1-AU-ND - MCU AVR 128K FLASH 1.6V 100-TQFP

AVR1907
The preprogrammed AT90USB1287 firmware offers features such as a bootloader for
self-programming and a UART-to-USB gateway.
3.2 Power supply
The kit is powered from USB which leaves two options to power it: Either connects
the kit to a PC through an USB cable, or to a 5V USB power supply (AC/DC adapter).
3.3 Measuring the XMEGA power consumption
As part of an evaluation of the ATxmega128A1 it can be of interest to measure its
power consumption. The R105 resistor (0 Ohm) is the only connection point between
the XMEGA power plane (the V_XM net) and common 3.3V supply of the board (the
V3P3 net). By replacing the R105 shunt resistor with a higher value resistor it is
possible to determine the current consumption of the ATxmega128A1.
3.4 Programming the XMEGA through the USB gateway
Programming of the ATxmega128A1 through the USB is not supported in the
preliminary release.
3.5 Communication through UART-to-USB gateway
The XMEGA’s UARTC0 is connected to a software UART on the AT90USB1287. The
AT90USB1287 UART is communicating at 9600 baud, using one start bit, eight data
bits, one stop bit and no parity.
When the AT90USB1287 device is enumerated (connected to a PC) the data
transmitted from the XMEGA is passed on to a (virtual) COM port. This means that it
is possible to use a terminal program to receive the transmitted data on a PC.
Similarly data transmitted from the PC COM port is passed on to the XMEGA UART
through the gateway.
If the USB device is not enumerated, e.g. powering the kit from an USB supply
adapter, the AT90USB1287 device’s UART will operate in loop back mode (echo
back everything it receives).
4 Connectors
The Xplain kit has four 10-pin 100mill headers. Two are used for programming the
ATxmega128A1 and AT90USB1287, and two are to access spare analog and digital
pins on the XMEGA (expansion headers).
4.1 Programming headers
The XMEGA can be programmed and debugged by connecting an external
programming/debugging tool to the “JTAG & PDI XMEGA” pin header (J100). The pin
header is having a standard JTAG programmer pinout (refer to online help in AVR
Studio ? ), and tools like the JTAGICE mkII or the AVR ONE! can thus be connected
directly to the header. If it is desired to use PDI programming/debugging an adapter
must be used.
3
8203D-AVR-04/10
相关PDF资料
PDF描述
DS2764BE+T&R IC MON BATT LI-ION HP 16-TSSOP
1435864-9 PATCHCORD CAT6 BLK/BLK BOOT 9'
1499740-3 CABLE/ASSY AMPTRAC SHLD CAT6 3FT
DS2764AE+T&R IC MON BATT LI-ION HP 16-TSSOP
MAX8903JETI+T IC DC/DC CHARGER LI+ 2A 28-TQFN
相关代理商/技术参数
参数描述
ATAVRZRAVEN 制造商:Atmel Corporation 功能描述:ATMEGA1284PV RADIO TXRX EVAL KIT 制造商:Atmel Corporation 功能描述:ATMEGA1284PV, RADIO TXRX, EVAL KIT, Silicon Manufacturer:Atmel, Silicon Family N
ATAVRZUSBSTICK 制造商:Atmel Corporation 功能描述:AT86RF230 USB STICK STARTER KIT 制造商:Atmel Corporation 功能描述:AT86RF230, USB STICK, STARTER KIT 制造商:Atmel Corporation 功能描述:Development Tools & Eval/Demo Boards, Silicon Manufacturer:Atmel, Silicon Core Number:ATmega1280, ATmega1280R231 and ATmega128RZAV, Silicon Family Name:AVR, Development Tool Type:Hardware / Software - Starter Kit , RoHS Compliant: Yes 制造商:Atmel Corporation 功能描述:AT86RF230, USB STICK, STARTER KIT, Silicon Manufacturer:Atmel, Silicon Core Numb
ATB 制造商:Hubbell Premise Wiring 功能描述:SERVICE POLE T-BAR 制造商:Hubbell Wiring Device-Kellems 功能描述:SERVICE POLE T-BAR
ATB 100 LBF.FT 制造商:TORQUELEADER 功能描述:TORQUE, RATCHET HEAD, 1/2 INCH
ATB 1064 制造商:Astro Tool Corp 功能描述:TOOL INSERTION MS24256B20