参数资料
型号: ATMEGA325V-8MUR
厂商: Atmel
文件页数: 45/85页
文件大小: 0K
描述: MCU AVR 32K FLASH 8MHZ 64QFN
产品培训模块: megaAVR Introduction
标准包装: 4,000
系列: AVR® ATmega
核心处理器: AVR
芯体尺寸: 8-位
速度: 8MHz
连通性: SPI,UART/USART,USI
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 54
程序存储器容量: 32KB(16K x 16)
程序存储器类型: 闪存
EEPROM 大小: 1K x 8
RAM 容量: 2K x 8
电压 - 电源 (Vcc/Vdd): 1.8 V ~ 5.5 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 64-VFQFN 裸露焊盘
包装: 带卷 (TR)
其它名称: ATMEGA325V-8MUR-ND
2010-2011 Microchip Technology Inc.
Preliminary
DS41419C-page 267
PIC16(L)F1824/1828
25.5.3.3
7-bit Transmission with Address
Hold Enabled
Setting the AHEN bit of the SSP1CON3 register
enables additional clock stretching and interrupt gen-
eration after the 8th falling edge of a received match-
ing address. Once a matching address has been
clocked in, CKP is cleared and the SSP1IF interrupt is
set.
Figure 25-18 displays a standard waveform of a 7-bit
Address Slave Transmission with AHEN enabled.
1.
Bus starts Idle.
2.
Master sends Start condition; the S bit of
SSP1STAT is set; SSP1IF is set if interrupt on
Start detect is enabled.
3.
Master sends matching address with R/W bit
set. After the 8th falling edge of the SCL line the
CKP bit is cleared and SSP1IF interrupt is gen-
erated.
4.
Slave software clears SSP1IF.
5.
Slave software reads ACKTIM bit of SSP1CON3
register, and R/W and D/A of the SSP1STAT
register to determine the source of the interrupt.
6.
Slave reads the address value from the
SSP1BUF register clearing the BF bit.
7.
Slave software decides from this information if it
wishes to ACK or not ACK and sets ACKDT bit
of the SSP1CON2 register accordingly.
8.
Slave sets the CKP bit releasing SCL.
9.
Master clocks in the ACK value from the slave.
10. Slave hardware automatically clears the CKP bit
and sets SSP1IF after the ACK if the R/W bit is
set.
11. Slave software clears SSP1IF.
12. Slave loads value to transmit to the master into
SSP1BUF setting the BF bit.
13. Slave sets CKP bit releasing the clock.
14. Master clocks out the data from the slave and
sends an ACK value on the 9th SCL pulse.
15. Slave hardware copies the ACK value into the
ACKSTAT bit of the SSP1CON2 register.
16. Steps 10-15 are repeated for each byte transmit-
ted to the master from the slave.
17. If the master sends a not ACK the slave
releases the bus allowing the master to send a
Stop and end the communication.
Note: SSP1BUF cannot be loaded until after the
ACK.
Note: Master must send a not ACK on the last byte
to ensure that the slave releases the SCL
line to receive a Stop.
相关PDF资料
PDF描述
VE-B7R-IX-F3 CONVERTER MOD DC/DC 7.5V 75W
VE-B7R-IX-F2 CONVERTER MOD DC/DC 7.5V 75W
VE-BNZ-IW CONVERTER MOD DC/DC 2V 40W
VE-B7R-IX-F1 CONVERTER MOD DC/DC 7.5V 75W
VE-B7P-IX-F4 CONVERTER MOD DC/DC 13.8V 75W
相关代理商/技术参数
参数描述
ATMEGA328 制造商:Arduino 功能描述:Atmel Atmega328 MCU w/Arduino bootloader
ATMEGA328-AU 功能描述:8位微控制器 -MCU AVR 32K FLSH 1K EE2K SRAM-20MHz IND RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATMEGA328-AUR 功能描述:8位微控制器 -MCU AVR 32K FLSH 1K EE2K SRAM-20MHz IND RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATMEGA328-MMH 功能描述:8位微控制器 -MCU AVR 16KB FL 512B EE 1KB SRAM 20 MHZ GRN RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATMEGA328-MMHR 功能描述:8位微控制器 -MCU AVR 16KB FL 512B EE 1KB SRAM 20 MHZ GRN RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT