- 您现在的位置：买卖IC网 > PDF目录375378 > ATTL7554AP (Electronic Theatre Controls, Inc.) LH1263 E&M Signaling Circuit PDF资料下载
参数资料
| 型号： | ATTL7554AP |
| 厂商： | Electronic Theatre Controls, Inc. |
| 英文描述： | LH1263 E&M Signaling Circuit |
| 中文描述： | LH1263首页 |
| 文件页数： | 24/28页 |
| 文件大小： | 486K |
| 代理商： | ATTL7554AP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页
24
Lucent Technologies Inc.
Data Sheet
March 1997
L7554 Low-Power SLIC
Applications
(continued)
ac Design
There are four key ac design parameters.
Termination
impedance
is the impedance looking into the 2-wire
port of the line card. It is set to match the impedance of
the telephone loop in order to minimize echo return to
the telephone set.
Transmit gain
is measured from the
2-wire port to the PCM highway, while
receive gain
is
done from the PCM highway to the transmit port.
Finally, the
hybrid balance
network cancels the
unwanted amount of the receive signal that appears at
the transmit port.
At this point in the design, the codec needs to be select-
ed. The discrete network between the SLIC and the
codec can then be designed. The following is a brief
codec feature and selection summary.
First-Generation Codecs
These perform the basic filtering, A/D (transmit), D/A
(receive), and
μ
-law/A-law companding. They all have
an op amp in front of the A/D converter for transmit gain
setting and hybrid balance (cancellation at the summing
node). Depending on the type, some have differential
analog input stages, differential analog output stages,
and
μ
-law/A-law selectability. This generation of codecs
have the lowest cost. They are most suitable for appli-
cations with fixed gains, termination impedance, and
hybrid balance.
Second-Generation Codecs
This class of devices includes a microprocessor inter-
face for software control of the gains and hybrid bal-
ance. The hybrid balance is included in the device. ac
programmability adds application flexibility and saves
several passive components and also adds several I/O
latches that are needed in the application. However,
there is no transmit op amp, since the transmit gain and
hybrid balance are set internally.
Third-Generation Codecs
This class of devices includes the gains, termination
impedance, and hybrid balance—all under micropro-
cessor control. Depending on the device, it may or may
not include latches.
Selection Criteria
In the codec selection, increasing software control and
flexibility are traded for device cost. To help decide, it
may be useful to consider the following. Will the appli-
cation require only one value for each gain and imped-
ance Will the board be used in different countries with
different requirements Will several versions of the
board be built If so, will one version of the board be
most of the production volume Does the application
need only real termination impedance Does the hybrid
balance need to be adjusted in the field
In the following examples, use of a first-generation co-
dec is shown. The equations for second- and third-gen-
eration codecs are simply subsets of these. There are
two examples: The first shows the simplest circuit,
which uses a minimum number of discrete components
to synthesize a real termination impedance. The second
example shows the use of the uncommitted op amp to
synthesize a complex termination. The design has been
automated in a DOS-based program, available on re-
quest.
相关PDF资料 |
PDF描述 |
|---|---|
| AU01Z | Fast-Recovery Rectifier Diodes |
| AU02Z | Fast-Recovery Rectifier Diodes |
| AU01 | ER 3C 2#16 1#8 SKT PLUG |
| AU01A | Fast-Recovery Rectifier Diodes |
| AU02 | Fast-Recovery Rectifier Diodes |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ATTL7554BP | 制造商:AGERE 制造商全称:AGERE 功能描述:L7554 Low-Power SLIC |
| ATTL7554BP-TR | 制造商:AGERE 制造商全称:AGERE 功能描述:L7554 Low-Power SLIC |
| ATTL7554P-TR | 制造商:AGERE 制造商全称:AGERE 功能描述:L7554 Low-Power SLIC |
| ATTL7556AAU | 制造商:未知厂家 制造商全称:未知厂家 功能描述:LH1263 E&M Signaling Circuit |
| ATTL7556AAU-TR | 制造商:AGERE 制造商全称:AGERE 功能描述:Low-Power SLICs with Battery Switch |
发布紧急采购，3分钟左右您将得到回复。