- 您现在的位置：买卖IC网 > PDF目录18380 > AV37029 (Panasonic Electric Works)SWITCH FS PLUNGER SILV LFT ANGLE PDF资料下载
参数资料
| 型号： | AV37029 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 13/13页 |
| 文件大小： | 0K |
| 描述： | SWITCH FS PLUNGER SILV LFT ANGLE |
| 标准包装： | 500 |
| 系列： | AV3 |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 3A @ 125VAC |
| 触动器类型： | 圆形（针状冲杆） |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 操作力： | 49gf |
AV3,AVM3/AVT3,AVL3
2-(3) .110 Quick-connect terminal
CAD Data
mm General tolerance: ± 0.25
7.6 ± 0.3
(P.T.)
0.6 max.
4.0
2.4 -0.05
7.7
+0.1
(O.P.)
6 .7 8.4 ± 0.3
3.3 2.4
C
NO
NC
2.5 ± 0.1
+0.1
2.4 -0.05 dia.
5.5 ± 0.1
7.1 ± 0.15
11.0
1.2 dia.
8.8
9.5 ± 0.1
0.5
2.8 ± 0.1
6.4 ± 0.2
± 0.05
16.1
19.8 ± 0.3
As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal.
NOTES
1.Regarding fastening of switch body
In fastening the switch body, use ?at
?lister head M2.3 screws, with tightening
torque of not more than 0.29N·m.To
prevent loosening of the screws, it is
recommended that spring washers be
used with the screws and adhesive be
applied to lock the screws.
After mounting the switch and making
wiring connections, the insulation
distance between ground and each
2.Soldering operation
Manual soldering should be
accomplished within 3 seconds with max.
350 ° C iron.
Care should be taken not to apply force
to the terminals during soldering.
Terminal portions must not be moved in
min.1 minute after soldering.Also no
tensile strength of lead wires should be
applied to terminals.
3.Regarding connector connections
6.Cautions regarding use
This subminiature switch has been
designed as a dedicated switch for AC
use, but it can be used for low capacity
DC circuits.
Please select gold-clad contact types
when loads are in the low-level area of
1mA up to 100mA and 5V up to 30V.
3A
Ag
terminal should be con?rmed as
suf?cient.
The positioning of the switch should be
such that the pushbutton or actuator for
the switch should not directly apply force
to the operating section in the free
(.110 quick connect terminals)
For making connections, a dedicated
receptacle for .110 quick connect
terminals should be used, and the
terminals should be inserted parallel to
the receptacle.Consideration should be
100 mA
1 mA
Au (-61)
Triple layer contact type
condition.For a pushbutton, the force
given to mounting so that no tensile load
0
DC
5
15
30V
from the pushbutton should be applied in
a perpendicular direction.
is applied to the lead wires.
4.In making the switch selection
AC
(Reference only)
5
30
250V
In setting the movement after operation,
the over-travel should be set not less
than 70% as a standard.Setting the
movement at less than 70% of O.T.may
cause troubles such as mis-contact and
welding due to small contact force of the
switch.
N.C.
side
Consideration should be given to provide
for no interference up to +20% variation
of the standard characteristics values.
5.Environment
Locations where corrosive gases having
a bad in?uence on contacts are present,
and locations where there is an
excessive amount of siliceous or other
abrasive dust should be avoided.
For switching of inductive loads (relays,
solenoids, buzzers, etc.), in order to
prevent damage to contacts due to the
occurrence of arcing, an arc absorbing
circuit should be applied
7.Quality check under Actual Loading
Condition
To assure reliability, check the switch
under actual loading conditions.Avoid any
situation that may adversely affect
Contact
force
0
Stroke
switching performance.
8.When using lever type switch, care
should be taken not to apply undue
N.O.
side
70% of O.T.
specified value
Usable
area
force on the body from the opposite
side or side ways to its operating
O.T. spedified
value
direction.
P.T.
O.T. max.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AECTB10E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| 445W33L25M00000 | CRYSTAL 25.00000 MHZ 12PF SMD |
| AV36049 | SWITCH FS PLUNGER SILVER RT ANG |
| AV36029 | SWITCH FS PLUNGER SILVER RT ANG |
| B32521C3334K289 | FILM CAP 0.3300UF 10% 250V |
| AV35049 | SWITCH FS PIN PLUNGER GOLD PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AV3704619 | 功能描述:基本/快动开关 SWITCH FS PLUNGER GOLD LEFT ANGLE RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| AV37049 | 功能描述:SWITCH FS PLUNGER GOLD LFT ANGLE RoHS:是 类别:开关 >> 快动，限位，拉杆 系列:AV3 其它有关文件:Declaration of Conformity 标准包装:1 系列:* |
| AV3710619 | 功能描述:基本/快动开关 SWITCH FS HINGE GOLD LEFT ANGLE RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| AV3712619 | 功能描述:基本/快动开关 SWITCH FS HINGE GOLD LEFT ANGLE RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| AV37129 | 功能描述:基本/快动开关 SWITCH FS HINGE SILVER LIFT ANGLE RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
发布紧急采购，3分钟左右您将得到回复。