参数资料
型号: AV4004
厂商: Panasonic Electric Works
文件页数: 5/5页
文件大小: 0K
描述: SWITCH SNAP MINI PLUNG SILV SLD
标准包装: 500
系列: AV4
电路: 单刀双掷
开关功能: 开-瞬时
触点额定电压: 0.5A @ 30VDC
触动器类型: 圆形(针状冲杆)
安装类型: 底座安装
端接类型: 焊片
操作力: 100gf

AV4
Hinge lever type
mm General tolerance: ± 0.15
CAD Data
6.5
(P.T.)
2.4 max.
2.5
0.8
3.0
0.11
(F.P.)
(O.P.) 9.0 max.
6.4 ± 0.6
5 . 1 4 .5 5
1.5
3.1
1.4
1.
65
di
a.
Pretravel
Movement Differential
2.4 max.
0.7 max.
1.4
Overtravel
Operating Position
0.4 min.
6.4 ± 0.6
1.2
0.8
0.6
Free Position
9.0 max.
Simulated roller lever type
CAD Data
4.0
7.5
2.5
Note: All other dimensions are the same as
those of pin plunger type.
5.5
(P.T.)
2.2 max.
0.8
3.0
0.11
(O.P.)
0.7
6.7 ± 0.5
(F.P.)
9.4 max.
Pretravel
Movement Differential
Overtravel
2.2 max.
0.7 max.
0.3 min.
a.
1.
65
di
Operating Position
Free Position
6.7 ± 0.5
9.4 max.
Note: All other dimensions are the same as
those of pin plunger type.
NOTES
1. Mounting
1) After mounting and wiring, the
insulation distance between ground and
each terminal should be con?rmed as
suf?cient.
2) When the operation object is in the
free position, force should not be applied
to the actuator or to the pin plunger. Also
force should be applied to the pin plunger
from vertical direction to the switch.
3) In setting the movement after
operation, the over-travel should be set
within the range of the speci?ed O.T.
value.
4) In fastening the switch body, use the
M1.4 screw, with tightening torque of not
more than 0.098 N·m.
2. Soldering
1) Manual soldering should be
accomplished within 5 seconds with max.
350 ° C iron.
Care should be taken not to apply force
to the terminals during soldering.
2) Terminal portion must not be moved
within 1 minute after soldering. Also no
tensile strength of lead wires should be
applied to the terminals.
3) When using the angle terminal type,
insert an insulation separator between
the switch body and the printed circuit
board (Insulation separator 0.2 to 0.4mm
thick) to prevent the soldering ?ux from
?owing under the PC board.
3. Cleaning
As AV4 switch is not completely sealed
construction, avoid cleaning.
4. Selection of switch
When specifying AV4 switches, allow
± 20% to the listed operating
characteristics.
5. Avoid using and keeping switches
in the following conditions:
? In corrosive gases
? In a dusty environment
? Where silicon atmosphere prevails
6. When switching low-level circuits
(max. 100 mA), gold plate contact
types are recommended.
7. When using the lever type, avoid
applying force from the reverse and
side direction of actuating.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AECTB16E 201201-T
相关PDF资料
PDF描述
D3V-013M-1A3 SWITCH LEVER SPDT 0.1A SLD TERM
559-0102-023F LED PMI SNAP-IN RED PVC FREE
AV3504619 SWITCH FS PIN PLUNGER GOLD PCB
AV3404619 SWITCH FS PIN PLUNGER GOLD PCB
559-6201-023F LED PMI SNAP-IN GRN PVC FREE
相关代理商/技术参数
参数描述
AV400461 功能描述:基本/快动开关 SPDT 0.1A, Pin Plunger, Solder RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel
AV400461J 制造商:Panasonic Electric Works 功能描述:
AV4004NIL 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:ONE OF THE SMALLEST SNAP-ACTION SWITCHES
AV400COMP 制造商:California Eastern Laboratories (CEL) 功能描述:Component Video Distribution Amplifier 制造商:CABLE ELECTRONICS 功能描述:CE LABS COMPONENT VIDEO DISTRIBUTION AMPLIFIER, FOUR WAY AUDIO/COMPONENT-VIDEO DISTRIBUTION AMPLIFIER, FEATURES: HIGH PERFORMANCE, LOW DISTORTION, ONE-TO-ONE SIGNAL RATIO, CASCADABLE, ENCLOSED IN METAL HOUSING TO REDUCE INTERFERENCE
AV400SV 制造商:California Eastern Laboratories (CEL) 功能描述:Audio Video 4-Way Distribution Amplifier 制造商:CABLE ELECTRONICS 功能描述:CE Labs S-Video Distribution Amplifier, Features: Four way audio/video with S-video inputs and outputs, high performance, enclosed in metal housings to reduce interference