- 您现在的位置：买卖IC网 > PDF目录18909 > AV454461 (Panasonic Electric Works)SWITCH SNAP MINI ROLLER ANG PCB PDF资料下载
参数资料
| 型号： | AV454461 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | SWITCH SNAP MINI ROLLER ANG PCB |
| 标准包装： | 500 |
| 系列： | AV4 |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 0.1A @ 30VDC |
| 触动器类型： | 按片，仿真滚轴 |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 操作力： | 29gf |
AV4
Hinge lever type
mm General tolerance: ± 0.15
CAD Data
6.5
(P.T.)
2.4 max.
2.5
0.8
3.0
0.11
(F.P.)
(O.P.) 9.0 max.
6.4 ± 0.6
5 . 1 4 .5 5
1.5
3.1
1.4
1.
65
di
a.
Pretravel
Movement Differential
2.4 max.
0.7 max.
1.4
Overtravel
Operating Position
0.4 min.
6.4 ± 0.6
1.2
0.8
0.6
Free Position
9.0 max.
Simulated roller lever type
CAD Data
4.0
7.5
2.5
Note: All other dimensions are the same as
those of pin plunger type.
5.5
(P.T.)
2.2 max.
0.8
3.0
0.11
(O.P.)
0.7
6.7 ± 0.5
(F.P.)
9.4 max.
Pretravel
Movement Differential
Overtravel
2.2 max.
0.7 max.
0.3 min.
a.
1.
65
di
Operating Position
Free Position
6.7 ± 0.5
9.4 max.
Note: All other dimensions are the same as
those of pin plunger type.
NOTES
1. Mounting
1) After mounting and wiring, the
insulation distance between ground and
each terminal should be con?rmed as
suf?cient.
2) When the operation object is in the
free position, force should not be applied
to the actuator or to the pin plunger. Also
force should be applied to the pin plunger
from vertical direction to the switch.
3) In setting the movement after
operation, the over-travel should be set
within the range of the speci?ed O.T.
value.
4) In fastening the switch body, use the
M1.4 screw, with tightening torque of not
more than 0.098 N·m.
2. Soldering
1) Manual soldering should be
accomplished within 5 seconds with max.
350 ° C iron.
Care should be taken not to apply force
to the terminals during soldering.
2) Terminal portion must not be moved
within 1 minute after soldering. Also no
tensile strength of lead wires should be
applied to the terminals.
3) When using the angle terminal type,
insert an insulation separator between
the switch body and the printed circuit
board (Insulation separator 0.2 to 0.4mm
thick) to prevent the soldering ?ux from
?owing under the PC board.
3. Cleaning
As AV4 switch is not completely sealed
construction, avoid cleaning.
4. Selection of switch
When specifying AV4 switches, allow
± 20% to the listed operating
characteristics.
5. Avoid using and keeping switches
in the following conditions:
? In corrosive gases
? In a dusty environment
? Where silicon atmosphere prevails
6. When switching low-level circuits
(max. 100 mA), gold plate contact
types are recommended.
7. When using the lever type, avoid
applying force from the reverse and
side direction of actuating.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AECTB16E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| ND06P00682K-- | THERMISTOR NTC DISK 6.8KOHM 10% |
| ASDMB-27.000MHZ-LY-T | OSC MEMS 27.000 MHZ SMD |
| ND06P00103K-- | THERMISTOR NTC DISK 10KOHM 10% |
| NC20MC0681KBA | THERM NTC 680OHM 10% 1206 SMD |
| NC20MC0221KBA | THERM NTC 220OHM 10% 1206 SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AV454461J | 制造商:Panasonic 功能描述:AV454461J |
| AV4544J | 制造商:Panasonic Electric Works 功能描述: |
| AV4544NIL | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:ONE OF THE SMALLEST SNAP-ACTION SWITCHES |
| AV4558 | 制造商:AVICTEK 制造商全称:AVICTEK 功能描述:Dual general purpose operational Amplifiers. |
| AV4558P | 制造商:AVICTEK 制造商全称:AVICTEK 功能描述:Dual general purpose operational Amplifiers. |
发布紧急采购，3分钟左右您将得到回复。