参数资料
| 型号： | AXN426C530P |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 5/13页 |
| 文件大小： | 0K |
| 描述： | CONN HEADER .8MM 26POS SMD |
| 其它有关文件： | Connectors SMD-Technical Info |
| 标准包装： | 1,000 |
| 系列： | P8 |
| 连接器类型： | 接头，外罩触点 |
| 位置数： | 26 |
| 间距： | 0.031"（0.80mm） |
| 行数： | 2 |
| 安装类型： | 表面贴装 |
| 特点： | 板导轨 |
| 触点表面涂层： | 金 |
| 包装： | 带卷 (TR) |
| 配接层叠高度： | 5mm，5.5mm，8mm |
| 板上方高度： | 0.186"（4.72mm） |
| 配套产品： | 255-3017-6-ND - CONN SOCKET .8MM 26POS SMD 255-3017-1-ND - CONN SOCKET .8MM 26POS SMD AXN326C238S-ND - CONN SOCKET .8MM 26POS SMD AXN326C238P-ND - CONN SOCKET .8MM 26POS SMD AXN326C238J-ND - CONN SOCKET .8MM 26POS SMD AXN326C130S-ND - CONN SOCKET .8MM 26POS SMD AXN326C130P-ND - CONN SOCKET .8MM 26POS SMD AXN326C038S-ND - CONN SOCKET .8MM 26POS SMD AXN326C038P-ND - CONN SOCKET .8MM 26POS SMD AXN326C038J-ND - CONN SOCKET .8MM 26POS SMD 更多... |
AXN(1/3/4)
SPECIFICATIONS
1. Characteristics
Speci?cations
Item
3mm, 3.5mm, 4mm, 4.5mm,
5.0mm, 5.5mm, 6.0mm, 7.0mm,
11.5mm type
Conditions
8.0mm, 13.0mm, 14.0mm type
Rated current
Rated voltage
0.5A
60V AC/DC
Electrical
characteristics
Breakdown voltage
Insulation resistance
250V AC for 1 minute
Min. 1,000M ?
Detection current: 1mA
Using 500V DC megger
Contact resistance
Max. 60m ?
Max. 50m ?
Based on the contact resistance
measurement method speci?ed by
JIS C 5402.
Composite insertion force
Composite removal force
Max. 43.1N (30 pin contacts)
Min. 6.37N (30 pin contacts)
Max. 0.785N × no. of pins (initial)
Min. 0.127N × no. of pins
Mechanical
characteristics
Contact holding force
40 pin contacts or less:
Min. 1.96N
50 pin contacts or more:
Min. 1.96N
Measuring the maximum force.
As the contact is axially pull out.
Min. 0.981N
Ambient temperature
Soldering heat resistance
Storage temperature
–55 ° C to +85 ° C
Max. peak temperature of 245 ° C (on the surface of the PC board
around the connector terminals)
300 ° C within 5 seconds
–55 ° C to +85 ° C (product only)
–40 ° C to +50 ° C (standard packing)
No freezing at low temperatures
Infrared re?ow soldering
Soldering iron
No freezing at low temperatures.
No dew condensation.
Conformed to MIL-STD-202F, method 107G
Thermal shock resistance
(header and socket mated)
5 cycles,
insulation resistance
min. 100M ? ,
contact resistance
max. 60m ?
5 cycles,
insulation resistance
min. 100M ? ,
contact resistance
max. 50m ?
Order Temperature ( ° C)
3
1 –55 ? 0
2
3 85 + 30
4
Time (minutes)
30
Max. 5
30
Max. 5
Environmental
characteristics
–55 ? 0 3
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H 2 S resistance
(header and socket mated)
SO 2 resistance
(header and socket mated)
120 hours, insulation resistance
min. 100M ? ,
contact resistance
max. 60m ?
24 hours, insulation resistance
min. 100M ? ,
contact resistance
max. 60m ?
48 hours, contact resistance
max. 60m ?
48 hours, contact resistance
max. 60m ?
240 hours, insulation resistance
min. 100M ? ,
contact resistance
max. 50m ?
48 hours, insulation resistance
min. 100M ? ,
contact resistance
max. 50m ?
96 hours, contact resistance
max. 50m ?
96 hours, contact resistance
max. 50m ?
Bath temperature 40 ± 2 ° C,
humidity 90 to 95% R.H.
Bath temperature 35 ± 2 ° C,
saltwarter concentration 5 ± 1%
Bath temperature 40 ± 2 ° C,
gas concentration 3 ± 1 ppm,
humidity 75 to 80% R.H.
Bath temperature 40 ± 2 ° C,
gas concentration 10 ± 3 ppm,
humidity 90 to 95% R.H.
Lifetime
characteristics
Insertion and removal life
50 times
100 times
Repeated insertion and removal speed of
max. 200 times/hours
Unit weight
2. Material and surface treatment
Mated height 3mm 30 pin contacts; Socket: 0.26g Header: 0.26g
50 pin contacts; Socket: 0.40g Header: 0.44g
Part name
3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,
6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm type
11.5mm type
Material
Surface treatment
Material
Surface treatment
Molded portion
Bracket
Heat-resistant resin
(UL94V-0)
—
—
—
LCP resin
(UL94V-0)
Copper alloy
—
Cu plating on base, Sn plating on surface
Contact portion:
Ni plating on base, Au plating on surface
Contact portion:
Ni plating on base, Au plating on surface
Contact
Copper alloy
Terminal portion:
Copper alloy
Terminal portion:
Ni plating on base, Au plating on surface
(Except for thick of terminal)
Ni plating on base, Au plating on surface
(Except for thick of terminal)
ACCTB25E 201303-T
Panasonic Corporation
Automation Controls Business Division
industrial.panasonic.com/ac/e/
相关PDF资料 |
PDF描述 |
|---|---|
| AXN426C430P | CONN HEADER .8MM 26POS SMD |
| 1590WYF | BOX ALUM 3.62X3.62X1.71" UNPTD |
| AXN426C330P | CONN HEADER .8MM 26POS SMD |
| AXN326C238P | CONN SOCKET .8MM 26POS SMD |
| AXN326C130P | CONN SOCKET .8MM 26POS SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AXN426C530S | 功能描述:板对板与夹层连接器 CONN HEADER 26 POS 0.8mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN430030S | 功能描述:板对板与夹层连接器 CONN HEADER 30 POS 0.8mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN430030SJ | 制造商:Panasonic Electric Works 功能描述: |
| AXN430040P | 功能描述:板对板与夹层连接器 CONN HEADER 30 POS 0.8mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN430330J | 功能描述:板对板与夹层连接器 CONN HEADER 30 POS 0.8mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
发布紧急采购，3分钟左右您将得到回复。