参数资料
| 型号： | AXN480C530P |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 10/13页 |
| 文件大小： | 0K |
| 描述： | CONN HEADER .8MM 80POS SMD |
| 其它有关文件： | Connectors SMD-Technical Info |
| 标准包装： | 1,000 |
| 系列： | P8 |
| 连接器类型： | 接头，外罩触点 |
| 位置数： | 80 |
| 间距： | 0.031"（0.80mm） |
| 行数： | 2 |
| 安装类型： | 表面贴装 |
| 特点： | 板导轨 |
| 触点表面涂层： | 金 |
| 包装： | 带卷 (TR) |
| 配接层叠高度： | 5mm，5.5mm，8mm |
| 板上方高度： | 0.186"（4.72mm） |
| 配套产品： | 255-3023-6-ND - CONN SOCKET .8MM 80POS SMD 255-3022-6-ND - CONN SOCKET .8MM 80POS SMD 255-3023-1-ND - CONN SOCKET .8MM 80POS SMD 255-3022-1-ND - CONN SOCKET .8MM 80POS SMD AXN380C130S-ND - CONN SOCKET .8MM 80POS SMD AXN380C130P-ND - CONN SOCKET .8MM 80POS SMD AXN380C038S-ND - CONN SOCKET .8MM 80POS SMD AXN380C038P-ND - CONN SOCKET .8MM 80POS SMD AXN380C038J-ND - CONN SOCKET .8MM 80POS SMD AXN380130S-ND - CONN SOCKET .8MM 80POS SMD 更多... |
Notes on Using Narrow pitch Connectors
Notes on Using Narrow pitch Connectors
Regarding the design of devices and PC board patterns
1) When connecting several connectors
together by stacking, make sure to
maintain proper accuracy in the design of
structure and mounting equipment so
that the connectors are not subjected to
twisting and torsional forces.
2) With mounting equipment, there may
be up to a ± 0.2 to 0.3-mm error in
positioning. Be sure to design PC boards
and patterns while taking into
5) For all connectors of the narrow pitch
series, to prevent the PC board from
coming off during vibrations or impacts,
and to prevent loads from falling directly
on the soldered portions, be sure to
design some means to ?x the PC board
in place.
Example) Secure in place with screws
Screw
backside of the FPC board to which the
connector is being connected. Please
make the reinforcement board
dimensions bigger than the outer limits of
the recommended PC board pattern
(should be approximately 1 mm greater
than the outer limit).
Material should be glass epoxy or
polyimide, and the thickness should be
between 0.2 and 0.3 mm.
consideration the performance and
abilities of the required equipment.
Spacer
Connector
Spacer
PC board
(2) Collisions, impacts, or turning of FPC
boards, may apply forces on the
3) Some connectors have tabs embossed
on the body to aid in positioning. When
connector and cause it to come loose.
Therefore, make to design retaining
using these connectors, make sure that
the PC board is designed with positioning
holes to match these tabs.
4) To ensure the required mechanical
strength when soldering the connector
terminals, make sure the PC board
meets recommended PC board pattern
design dimensions given.
When connecting PC boards, take
appropriate measures to prevent the
connector from coming off.
6) Notes when using a FPC.
(1) When the connector is soldered to an
FPC board, during its insertion and
removal procedures, forces may be
applied to the terminals and cause the
soldering to come off. It is recommended
plates or screws that will ?x the connector
in place.
7) The narrow pitch connector series is
designed to be compact and thin.
Although ease of handling has been
taken into account, take care when
mating the connectors, as displacement
or angled mating could damage or
deform the connector.
to use a reinforcement board on the
Regarding the selection of the connector placement machine and the mounting
procedures
1) Select the placement machine taking
into consideration the connector height,
required positioning accuracy, and
packaging conditions.
2) Be aware that if the catching force of
the placement machine is too great, it
may deform the shape of the connector
body or connector terminals.
3) Be aware that during mounting,
external forces may be applied to the
connector contact surfaces and terminals
and cause deformations.
4) Depending on the size of the
connector being used, self alignment
may not be possible. In such cases, be
sure to carefully position the terminal with
the PC board pattern.
5) The positioning bosses give an
approximate alignment for positioning on
the PC board. For accurate positioning of
the connector when mounting it to the PC
board, we recommend using an
automatic positioning machine.
6) Excessive mounter chucking force may
deform the molded or metal part of the
connector. Consult us in advance if
chucking is to be applied.
ACCTB48E 201303-T
Panasonic Corporation
Automation Controls Business Division
industrial.panasonic.com/ac/e/
相关PDF资料 |
PDF描述 |
|---|---|
| AXN480C430P | CONN HEADER .8MM 80POS SMD |
| AXN480C330P | CONN HEADER .8MM 80POS SMD |
| 4N47TXV | ISOLATOR OPTICALLY COUPLED TO-78 |
| AXN380C130P | CONN SOCKET .8MM 80POS SMD |
| 4308R-102-203LF | RES ARRAY 20K OHM 4 RES 8-SIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AXN480C530PJ | 制造商:Panasonic Electric Works 功能描述: |
| AXN480C530S | 功能描述:板对板与夹层连接器 CONN HEADER 80 POS 0.8mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN480C530SJ | 制造商:Panasonic Electric Works 功能描述: |
| AXN500045G | 功能描述:板对板与夹层连接器 CONN SOCKET 100 POS 0.5mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN520045G | 功能描述:板对板与夹层连接器 CONN SOCKET 20 POS 0.5mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
发布紧急采购，3分钟左右您将得到回复。