参数资料
| 型号： | AXN580045G |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 7/7页 |
| 文件大小： | 0K |
| 描述： | CONN SOCKET .5MM 80POS SMD |
| 其它有关文件： | Connectors SMD-Technical Info |
| 产品变化通告： | P5 Connectors Discontinuation Mar/2012 |
| 标准包装： | 1,000 |
| 系列： | P5 |
| 连接器类型： | 插口，中央触点带 |
| 位置数： | 80 |
| 间距： | 0.020"（0.50mm） |
| 行数： | 2 |
| 安装类型： | 表面贴装 |
| 触点表面涂层： | 金 |
| 包装： | 带卷 (TR) |
| 配接层叠高度： | 5mm |
| 板上方高度： | 0.120"（3.05mm） |
| 配套产品： | 255-3033-6-ND - CONN HEADER .5MM 80POS SMD 255-3033-1-ND - CONN HEADER .5MM 80POS SMD 255-3033-2-ND - CONN HEADER .5MM 80POS SMD |
NOTES FOR USING SMD TYPE CONNECTORS (Common)
Handling Single
Components
1) Make sure not to drop or allow parts to
fall from work bench
2) Excessive force applied to the
terminals could cause warping, come
out, or weaken the adhesive strength of
the solder. Handle with care.
3) Repeated bending of the terminals
may cause terminals to break.
4) Do not use alcohol for cleaning. Doing
so may whiten the surface of molded
parts.
Cleaning ?ux from PC board
1) To increase the cleanliness of the
cleaning ?uid and cleaning operations,
prepare equipment for cleaning process
beginning with boil cleaning, ultrasonic
cleaning, and then vapor cleaning.
2) Carefully oversee the cleanliness of
the cleaning ?uids to make sure that the
contact surfaces do not become dirty
from the cleaning ?uid itself.
3) Since some powerful cleaning
solutions may dissolve molded
components of the connector and wipe
off or discolor printed letters, we
Handling the PC board
? Handling the PC board after
mounting the connector
When cutting or bending the PC board
after mounting the connector, be careful
that the soldered sections are subjected
to excessive forces.
The soldered areas should not be subjected to forces.
recommend aqua pura electronic parts
cleaners. Please consult us if you wish to
use other types of cleaning ?uids.
4) Please note that the surfaces of
molded parts may whiten when cleaned
with alcohol.
Storage of connectors
1) To prevent problems from voids or air
pockets due to heat of re?ow soldering,
avoid storing the connectors in areas of
high humidity. When storing the
connectors for more than six months, be
sure to consider storage area where the
humidity is properly controlled.
2) Depending on the connector type, the
color of the connector may vary from
connector to connector depending on
when it is produced.
Other Notes
1) These products are made for the
design of compact and lightweight
devices and therefore the thickness of the
molded components has been made very
thin. Therefore, be careful during
insertion and removal operations for
excessive forces applied may damage
the products.
2) Dropping of the products or rough
mishandling may bend or damage the
terminals and possibly hinder proper
Some connectors may change color
slightly if subjected to ultraviolet rays
during storage. This is normal and will not
affect the operation of the connector.
3) When storing the connectors with the
PC boards assembled and components
alreeady set, be careful not to stack them
up so the connectors are subjected to
excessive forces.
3) Before soldering, try not to insert or
remove the connector more than
absolutely necessary.
4) When coating the PC board after
soldering the connector to prevent the
deterioration of insulation, perform the
coating in such a way so that the coating
does not get on the connector.
5) There may be variations in the colors
of products from different production lots.
This is normal.
4) Avoid storing the connectors in
locations with excessive dust. The dust
may accumulate and cause improper
connections at the contact surfaces.
6) The connectors are not meant to be
used for switching.
7) Be sure not to allow external pressure
to act on connectors when assembling
PCBs or moving in block assemblies.
re?ow soldering.
Regarding sample orders to con?rm proper mounting
When ordering samples to con?rm
proper mounting with the placement
machine, connectors are delivered in 50-
piece units in the condition given right.
Consult a sale representative for ordering
sample units.
Condition when delivered from manufacturing
Reel
Please refer to the latest product
speci?cations when designing your
product.
Embossed tape
amount required for
the mounting
Required number
of products for
sample production
(Unit 50 pcs.)
(Delivery can also be made on a reel by
customer request.)
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ACCTB10E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| PS2501L-1-E3-L-A | PHOTOCOUPLER 1CH TRANS OUT SM |
| AXN560045G | CONN SOCKET .5MM 60POS SMD |
| 770101562 | RES ARRAY 5.6K OHM 9 RES 10-SIP |
| AXN550045G | CONN SOCKET .5MM 50POS SMD |
| PS2501L-1-E3-K-A | PHOTOCOUPLER 1CH TRANS OUT SM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AXN600585G | 功能描述:板对板与夹层连接器 CONN HEADER 100 POS 0.5mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN620585G | 功能描述:板对板与夹层连接器 CONN HEADER 20 POS 0.5mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN620585PJ | 制造商:Panasonic Electric Works 功能描述: |
| AXN630585G | 功能描述:板对板与夹层连接器 CONN HEADER 30 POS 0.5mm RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| AXN630585PJ | 制造商:Panasonic Electric Works 功能描述: |
发布紧急采购，3分钟左右您将得到回复。