- 您现在的位置：买卖IC网 > PDF目录298848 > AXW114431A (PANASONIC CORP) 14 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET PDF资料下载
参数资料
| 型号： | AXW114431A |
| 厂商： | PANASONIC CORP |
| 元件分类： | 电信和以太网连接器 |
| 英文描述： | 14 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 10/10页 |
| 文件大小： | 350K |
| 代理商： | AXW114431A |
AXW
NOTES
4) Contacts (5 in line)
26
16.7
5.08
×4=20.32
Position of the breaking contacts
5.08
2.54
Note) On the contacts there are
stamps “22” for AWG #22
and #24 types, and “26” for
AWG #26 and #28 types.
mm General tolerance:
±0.3
1. Use wires and contact types that
match.
The contact’s clamp is tamped with 22 or
26.
Use AWG#22 or #24 wire with the type
22 contact and AWG #26 or #28 wire with
the type 26 contact.
An incorrect combination will cause faulty
connections.
2. Use wires having a correct outer
insulation diameter.
The use of a wire with an outer insulation
diameter larger than the allowable value
or a wire with a hard material for the
insulation will cause faulty connections.
Furthermore, the use of a wire with an
outer insulation diameter less than the
allowable value will cause a drop in the
clamp strength. Use wires with a suitable
outer diameter and insulation material.
Suitable wire diameters are shown in the
table below.
Suitable wire diameters
* AWG#22 and #24 use different contacts from
AWG#26 and #28. Refer to the part number chart for
the part number.
3. Inserted wire length during wire
pressure welding
Insert the wire to a proper length and
perform the pressure welding.
If the inserted length is too short, the wire
will be pressure welded only at one
location.
If the inserted length is too long, the wire
will end up on the lance portion and a
proper pressure welding will not be
obtained.
4. Cut the end of the wire so that it is
straight and at. Be sure no uneven
strands remain.
5. When pressure welding a wire, fully
insert it to the proper position. Be sure
to squeeze the lever unit it reaches the
end position of the stroke.
6. After connecting the wire, check
that the wire clamp rmly clamps the
wire.
7. The contact holder should be
replaced as needed.
Size
Insulation
outer
diameter
Remark
AWG#22 1.5 dia. to
1.1 dia.
AWG #22 is Stranded
wire of 12 stands/0.18
AWG#24
Stranded wire
AWG#26 1.3 dia. to
1.1 dia.
Stranded wire
AWG#28
Regarding general notes, please refer
to page 12.
For other details, please verify with the
product specication sheets.
All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.
相关PDF资料 |
PDF描述 |
|---|---|
| AXW1144A | 14 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW116421A | 16 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW116431A | 16 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW1164A | 16 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW120421A | 20 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AXW1144A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件状态:过期 标准包装:1 |
| AXW116421A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件状态:过期 标准包装:1 |
| AXW116431A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件状态:过期 标准包装:1 |
| AXW1164A | 功能描述:16 Position Rectangular Housing Connector Socket 0.100" (2.54mm) 制造商:panasonic industrial automation sales 系列:AXW 包装:- 零件状态:过期 连接器类型:插口 触头类型:母形插口 针脚数:16 间距:0.100"（2.54mm） 排数:2 排距:0.100"（2.54mm） 安装类型:自由悬挂 触头端接:压接，IDC 紧固类型:- 颜色:- 特性:- 备注:不提供触点 标准包装:1 |
| AXW120421A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件状态:过期 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。