- 您现在的位置：买卖IC网 > PDF目录298849 > AXW7231 5 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, SOCKET PDF资料下载
参数资料
| 型号： | AXW7231 |
| 元件分类： | 电信和以太网连接器 |
| 英文描述： | 5 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, SOCKET |
| 文件页数： | 7/9页 |
| 文件大小： | 509K |
| 代理商： | AXW7231 |
AXW
160
mm General tolerance: ±0.3
4) Contacts (5 in line)
26
16.7
5.08
×4=20.32
Position of the breaking contacts
5.08
2.54
Note) On the contacts there are
stamps “22” for AWG #22
and #24 types, and “26” for
AWG #26 and #28 types.
NOTES
1. Use wires and contact types that
match.
The contact’s clamp is tamped with 22 or
26.
Use AWG#22 or #24 wire with the type
22 contact and AWG #26 or #28 wire with
the type 26 contact.
An incorrect combination will cause faulty
connections.
2. Use wires having a correct outer
insulation diameter.
The use of a wire with an outer insulation
diameter larger than the allowable value
or a wire with a hard material for the
insulation will cause faulty connections.
Furthermore, the use of a wire with an
outer insulation diameter less than the
allowable value will cause a drop in the
clamp strength. Use wires with a suitable
outer diameter and insulation material.
Suitable wire diameters are shown in the
table below.
Suitable wire diameters
* AWG#22 and #24 use different contacts from
AWG#26 and #28. Refer to the part number chart for
the part number.
3. Inserted wire length during wire
pressure welding
Insert the wire to a proper length and
perform the pressure welding.
If the inserted length is too short, the wire
will be pressure welded only at one
location.
If the inserted length is too long, the wire
will end up on the lance portion and a
proper pressure welding will not be
obtained.
4. Cut the end of the wire so that it is
straight and at. Be sure no uneven
strands remain.
5. When pressure welding a wire, fully
insert it to the proper position. Be sure
to squeeze the lever unit it reaches the
end position of the stroke.
6. After connecting the wire, check
that the wire clamp rmly clamps the
wire.
7. The contact holder should be
replaced as needed.
Size
Insulation
outer
diameter
Remark
AWG#22 1.5 dia. to
1.1 dia.
AWG #22 is Stranded
wire of 12 stands/0.18
AWG#24
Stranded wire
AWG#26 1.3 dia. to
1.1 dia.
Stranded wire
AWG#28
AXW.fm 160 y[W QOOR”NPQQQ“ú@—j“ú@PQPO
相关PDF资料 |
PDF描述 |
|---|---|
| AYF322715 | 27 CONTACT(S), FEMALE, 140 DEGREE FFC/FPC CONNECTOR, SURFACE MOUNT |
| AYF324115 | 41 CONTACT(S), FEMALE, 140 DEGREE FFC/FPC CONNECTOR, SURFACE MOUNT |
| AYF331535 | 15 CONTACT(S), FEMALE, RIGHT ANGLE FFC/FPC CONNECTOR, SURFACE MOUNT |
| AYU1-1P-02676-120 | BOARD TERMINATED, MALE, RF CONNECTOR, SURFACE MOUNT |
| AYU1-1S13-D0251-000(LF) | CABLE TERMINATED, FEMALE, RF CONNECTOR, SOCKET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AXW7231FP | 功能描述:Contact Pin FP Sigma Series 制造商:panasonic industrial automation sales 系列:FP Sigma 零件状态:有效 配件类型:触点引脚 配套使用产品/相关产品:FP Sigma 系列 规格:5 位置，26-28 AWG 标准包装:1 |
| AXWN-300 | 制造商:IDEC Corporation 功能描述:TWN PUSH-LOCK OPER SW |
| AXWN-400 | 制造商:IDEC Corporation 功能描述:TWN PUSH-LOCK |
| AXWN-400-W/OG81 | 制造商:IDEC CORPORATION 功能描述:W/OG81 LOCKING RING |
| AXWN-402-R | 制造商:IDEC CORPORATION 功能描述:TWN PUSH-LOCK SW |
发布紧急采购，3分钟左右您将得到回复。