参数资料
| 型号： | AYF211135 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 6/7页 |
| 文件大小： | 0K |
| 描述： | CONN FPC 0.2MM 11POS SMD R/A |
| 标准包装： | 1,000 |
| 系列： | Y2B |
| 连接器类型： | 顶部和底部触点 |
| 位置数： | 11 |
| 间距： | 0.008"（0.20mm） |
| FFC，FCB 厚度： | 0.20mm |
| 板上方高度： | 0.036"（0.90mm） |
| 安装类型： | 表面贴装，直角 |
| 线缆端类型： | 直形 |
| 端子： | 焊接 |
| 锁定功能： | 旋转锁，背锁 |
| 包装： | 带卷 (TR) |
| 触点表面涂层： | 金 |
| 工作温度： | -55°C ~ 85°C |
| 额定电流： | 0.200A |
| 额定电压： | 50V |
| 体座材料： | 液晶聚合物（LCP） |
Notes on Using FPC Connectors
■ Precautions for insertion/removal of FPC
<Front-Lock>
? To open the lever, hold its center and pull it up. An uneven load
applied to the lever on one side may deform and break the lever.
Do not apply an excessive load to the lever in the opening
direction, otherwise, the terminals may be deformed.
? Don’t further apply an excessive load to the fully opened lever;
otherwise, the lever may be deformed.
? Fully open the lever to insert an FPC.
? Since this product connects at the bottom, please insert the
FPC so that its electrode plane is facing the board to which it will
be mounted. Do not insert the FPC in the reverse direction of the
<Back-Lock>
? Avoid touching the lever (applying any external force) until an
FPC is inserted.
Do not open/close the lever without an FPC inserted. Failure to
follow this instruction will cause the contacts to warp, leading to
the contact tips to interfere with the insertion of an FPC,
deforming the terminals. Failure to follow this instruction may
cause the lever to be removed, terminals to be deformed, and/or
the FPC insertion force to increase.
Without an FPC inserted
contact section; otherwise, operation failures or malfunctions
may be caused.
(140 ° )
? The FPC insertion section is on the opposite side of the lever.
Be careful not to make a mistake in the FPC insertion position or
the lever opening/closing position. Otherwise, a contact failure or
connector breakage may occur.
? Do not insert an FPC upside down. Inserting an FPC in a
direction opposite to that you intended may cause an operation
(Y3FT)
? This product has a structure to position an inserted FPC using
the FPC tabs.
Therefore, insert an FPC at an angle to the board. If the FPC is
inserted in the direction parallel to the board, the molded
positioning parts block the FPC, leading to incomplete insertion.
Do not insert the FPC at an excessive angle to the board.
Otherwise, it may cause the deformation of metal parts, FPC
insertion failures, and FPC circuit breakages.
FPC
FPC positioning part
(Y3F)
? Completely insert the FPC horizontally. Do not insert the FPC
at an excessive angle to the board. Otherwise, it may cause the
deformation of metal parts, FPC insertion failures, and FPC
circuit breakages.
FPC
? Insert the FPC to the full depth of the connector without
altering the angle.
? When closing the lever, carefully use the tip of your ?nger to
push the entire lever or both sides of it. If pressure to the lever is
applied unevenly, IE: only the edge, it may deform or break the
FPC. Make sure that the lever is closed completely. Not doing so
will cause a faulty connection.
? Avoid applying an excessive load to the top of the lever during
or after closing the lever. Otherwise, the terminals may be
deformed.
? Remove the FPC at an angle with the lever fully opened. If the
lever is closed, or if the FPC is forcedly pulled into a direction
parallel to the board, the molded part may break.
failure or malfunction.
? Insert an FPC with the lever opened at right angle, that is, in
the factory default position.
? Completely insert the FPC horizontally. An FPC inserted at an
excessive angle to the board may cause the deformation of
metal parts, FPC insertion failures, and FPC circuit breakages.
? Insert the FPC to the full depth of the connector without
altering the angle.
? Insert the FPC into the connector after checking the position of
FPC insertion slot and FPC. Do not insert the FPC without
positioning the FPC and connector. Otherwise, it may cause
connector breakages. When it is hard to insert the FPC, do not
insert the FPC on that condition. Con?rm the FPC and
connector positioning.
? Do not apply an excessive load to the lever in the opening
direction beyond its open position; otherwise, the lever may be
deformed or removed.
? Do not apply an excessive load to the lever in a direction
perpendicular to the lever rotation axis or in the lever opening
direction; otherwise, the terminals may be deformed, and the
lever may be removed.
? To close the lever, turn down the lever by pressing the entire
lever or both sides of the lever with ?ngers tips. And close the
lever completely. Be careful not to apply partial load to the lever
that may cause its deformation or destruction.
Close the lever completely to prevent contact failure.
? If pressure to the lever is applied unevenly, it may deform or
break the FPC. Make sure that the lever is closed completely.
Not doing so will cause a faulty connection.
? Avoid applying an excessive load to the top of the lever during
or after closing the lever. Otherwise, the terminals may be
deformed.
? When opening the lever to remove the FPC, ensure that the
lever will not go over the initial position; otherwise, the lever may
be removed.
ACCTB13E 201303-T
Panasonic Corporation
Automation Controls Business Division
industrial.panasonic.com/ac/e/
相关PDF资料 |
PDF描述 |
|---|---|
| AYF331165 | CONN FPC .3MM 11POS SMD Y3BW |
| 345-020-527-802 | CARDEDGE 20POS DUAL .100 GREEN |
| 10042867-45MB10ELF | CONN FPC 45POS .5MM R/A SMD GOLD |
| 345-020-527-202 | CARDEDGE 20POS DUAL .100 GREEN |
| CAT24C128HU3IGT3 | IC EEPROM SERIAL 128KB I2C 8UDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AYF211335 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF211535 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF211735 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF211935 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF212135 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
发布紧急采购，3分钟左右您将得到回复。