参数资料
| 型号： | AYF216735 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 7/7页 |
| 文件大小： | 0K |
| 描述： | CONN FPC 0.2MM 67POS SMD R/A |
| 标准包装： | 1,000 |
| 系列： | Y2B |
| 连接器类型： | 顶部和底部触点 |
| 位置数： | 67 |
| 间距： | 0.008"（0.20mm） |
| FFC，FCB 厚度： | 0.20mm |
| 板上方高度： | 0.036"（0.90mm） |
| 安装类型： | 表面贴装，直角 |
| 线缆端类型： | 直形 |
| 端子： | 焊接 |
| 锁定功能： | 旋转锁，背锁 |
| 包装： | 带卷 (TR) |
| 触点表面涂层： | 金 |
| 工作温度： | -55°C ~ 85°C |
| 额定电流： | 0.200A |
| 额定电压： | 50V |
| 体座材料： | 液晶聚合物（LCP） |
Notes on Using FPC Connectors
? Remove the FPC at parallel with the lever fully opened. If the
lever is closed, or if the FPC is forcedly pulled, the product or
FPC may break.
? If a lever is accidentally detached during the handling of a
connector, do not use the connector any longer.
■ After an FPC is inserted, carefully handle it so as not to
apply excessive stress to the base of the FPC. When using
FPC with a bent condition, please pay attention to
precautions below; otherwise, in some conditions it may
cause conduction failure, connector breakage, unlocking
lever or FPC disconnection.
? Design so that a load is not applied to connector directly by
FPC bending.
? Avoid sharp FPC bending at the root of FPC insertion part.
? Design so that a load is not applied to the part of FPC bending.
? Fix the FPC if there might be a load on FPC when using the
FPC with cutout, do not apply a bending load to the cutout part
of FPC. Otherwise, it may cause FPC disconnection and
deformation since the cutout part of FPC is subjected to bending
stress.
FPC cutout part
■ Other cautions
? When coating the PC board after soldering the connector (to
prevent the deterioration of insulation), perform the coating in
such a way so that the coating does not get on the connector.
? The connectors are not meant to be used for switching.
? There is no problem on the product quality though the swelling
and the black spot, etc. might be generated in the molding parts.
Please refer to the latest product speci?cations when
designing your product.
Panasonic Corporation
Automation Controls Business Division
industrial.panasonic.com/ac/e/
ACCTB13E 201303-T
相关PDF资料 |
PDF描述 |
|---|---|
| 395-026-527-804 | CARD EDGE 26POS DL .100X.200 BLK |
| 395-026-527-802 | CARD EDGE 26POS DL .100X.200 BLK |
| 395-026-527-801 | CARD EDGE 26POS DL .100X.200 BLK |
| AYF336165 | CONN FPC 61POS SMD Y3BW |
| FF02S25SV1 | CONN FFC/FPC 0.3MM 25POS R/A SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AYF216935 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF217135 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF217335 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF217535 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF217735 | 功能描述:FFC & FPC连接器 FPC Connector RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
发布紧急采购，3分钟左右您将得到回复。