参数资料
型号: AZ3513
元件分类: 开关
英文描述: SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 4A, 30VDC, 9mm, PANEL MOUNT
封装: ROHS COMPLIANT
文件页数: 17/20页
文件大小: 603K
代理商: AZ3513
17
SL (AZ3)
CAUTIONS
1. Ambient conditions
1) The use of these switches under the
following conditions should be avoided.
If the following conditions should become
necessary, we recommend consulting us
first.
Use where there will be direct con tact
with organic solvents, strong acids or
alkalis, or direct exposure to their vapors.
Use where inflammable or corrosive
gases exist.
Because these switches are not of
water resistant or immersion-proof con-
struction, their use in water or oil should
be avoided. Also, locations where water
or oil can normally impringe upon the
switch or where there is an excessive
accumulation of dust should be avoided.
2) To improve reliability during actual
use, it is recommended that the opera-
tion be checked under installation condi-
tions.
3) If OT is too big, the life of limit switch
will be shortened switching friction. Use it
with enough margin of OT. 70% of OT
standard value will be good for use.
4) Do not use the switch in a silicon
atmosphere. Case should be taken
where organic silicon rubber, adhesive,
sealing material, oil, grease or lead wire
generates silicon.
5) Avoid use in excessively dusty envi-
ronments where actuator operation
would be hindered.
6) When used outdoors (in places where
there is exposure to direct sunlight or
rain such as in multistory car parks) or in
environments where ozone is generated,
the influence of these environments may
cause deterioration of the rubber materi-
al. Please consult us if you intend to use
a switch in environments such as these.
2. Mounting and wiring
1) Although SL limit switches have large
over-travel (O.T.), excessive O.T. will
occur wear and change in its characteris-
tics. Specifically, where there is a need
for long life, it is recommended that the
proper O.T. as given below should be
used. Specifically, where there is a need
for long life, it is recommended that the
proper O.T. as given below should be
used.
Within 1 to 3mm .039 to .118inch
2) When the operating object is in the
free condition, force should not be
applied directly to the actuator.
3) Use their own accessories when
mounting and wiring SL limit switches so
as to maintain their own characteristics.
When the SL rubber cover type is used,
there should absolutely be no tension
applied to the cord. If there is the fear
that tension may be applied, the L socket
or socket with cord attached should be
used. The maximum permissible tension
with the above socket use is
98N{10kgF}.
4) The tightening torque when installing
this limit switch should be 1.18 to 1.47
Nm (12 to 15 kgcm).
相关PDF资料
PDF描述
AZ7435F SNAP ACTING/LIMIT SWITCH, DPDT, MOMENTARY, 0.4A, 115VDC, 14mm, PANEL MOUNT
AZ510716F SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, PANEL MOUNT
AZ51281619 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, PANEL MOUNT
AZH2224CE SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 11mm, PANEL MOUNT
A165W-J2MG-T1-1 ROTARY SWITCH-2POSITIONS, SPDT, LATCHED, 3A, 30VDC, PANEL MOUNT
相关代理商/技术参数
参数描述
AZ35139 制造商:Panasonic Industrial Devices 功能描述:SL Roller Lever Rubber Cover Type Limit Switch
AZ35229 制造商:Panasonic Electric Works 功能描述:
AZ35239 制造商:Panasonic Electric Works 功能描述:
AZ35249 功能描述:SWITCH SNAP ACTION SPDT 4A 125V 制造商:panasonic industrial automation sales 系列:AZ3 包装:散装 零件状态:过期 电路:SPDT 开关功能:开-瞬时 额定电流:4A(AC/DC) 额定电压 - AC:125V 额定电压 - DC:30V 致动器类型:按片,滚轴 安装类型:底座安装 端子类型:焊接,快速连接 - 0.110"(2.8mm) 侵入防护:IP60 - 防尘 特性:端子盖 操作力,扭矩:200gf 释放力:50gf 预行程:0.120"(3.0mm) 差动行程:0.060"(1.5mm) 超行程:0.235"(6.0mm) 工作位置:1.594"(40.5mm) 机械寿命:10,000,000 次循环 电气寿命:100,000 次循环 工作温度:-20°C ~ 60°C 标准包装:1
AZ35259 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Switch, Limit, SL(AZ3) Series, Micro, Short Hinge Lever, Rubber Cover, UL Recog.