参数资料
型号: AZ4707F
元件分类: 开关
英文描述: SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, PANEL MOUNT
封装: CADMIUM FREE
文件页数: 18/21页
文件大小: 709K
代理商: AZ4707F
42
MOUNTING METHOD
1. L socket type
1) After loosening the L socket fastening
screws, grasp the terminal cover and pull
it away from the switch body.
2) Remove the fastening screw from the
terminal block. (Remove with the 3 termi-
nal receptacle.)
3) Loosen the hexagonal nut and
remove the rubber bushing and washer
from the inside.
4) Select cord from applicable wire table.
5) Decide which direction the cord outlet
is to face and strip the sheath according-
ly. (See page 43.)
6) After passing the applicable cord
through the hexagonal nut, bushing, and
washer in that order, pass the cord
through the terminal case.
7) After stripping the cord sheath, insert
the corresponding wires into the grooves
of the terminal body up to the wire stop,
then crimp the terminal receptacle over
the wires with a pair of pliers.
8) After the terminals have been properly
crimped in the terminal body, insert the
body into the terminal case. (When
inserting the body, be careful not to block
the hole for the fastening screw with the
wires.)
9) Temporarily screw in the fastening
screw through the terminal body, then
insert the washer and rubber bushing
into the cord opening of L socket.
Tighten it with a wrench or pliers.
10) Apply the rubber packing over the
terminals, then insert the L socket into
the switch body.
11) Tighten the fastening screw into the
switch body.
2. Socket with cord (including socket
with lamp)
1) Apply the rubber packing over the ter-
minals, then insert the socket with cord
into the switch body.
2) Screw the socket fastening screw into
the switch body and tighten it.
Mounting
The QL micro limit switch is manufac-
tured with a very small variation in the
distance between the datum plane and
the operating point. When the operating
point has been accurately established
and the mounting position clearly deter-
mined, two M4 bolts should be used
securely fastening the switch.
Pull away from the body.
Turn counterclockwise.
Terminal receptacle
Terminal body connection diagram
Turn counterclockwise.
Clockwise direction
Operating position
M4 fastening bolts
Mounting
Mounting plate
datum plane
(O.P.)
Lead wire stop
Terminal body
Terminal receptacle
Lead wire
QL (AZ4)
相关PDF资料
PDF描述
AZ51059 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.8A, 125VDC, PANEL MOUNT
AZ5107669 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, PANEL MOUNT
AZ5127F SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.8A, 125VDC, PANEL MOUNT
AV62251264 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, 2.1mm, PANEL MOUNT
AV6242643 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, 3.8mm, PANEL MOUNT
相关代理商/技术参数
参数描述
AZ47089 功能描述:SWITCH SNAP ACTION SPDT 5A 125V 制造商:panasonic industrial automation sales 系列:AZ4 包装:散装 零件状态:有效 电路:SPDT 开关功能:开-瞬时 额定电流:5A(AC/DC) 额定电压 - AC:125V 额定电压 - DC:30V 致动器类型:侧旋,可调滚轴 安装类型:底座安装 端子类型:电缆引线 侵入防护:IP64 - 防尘,耐水 特性:- 操作力,扭矩:205 ~ 450gf 释放力:11 ~ 25gf 预行程:15° 差动行程:3° 超行程:- 工作位置:- 机械寿命:10,000,000 次循环 电气寿命:300,000 次循环 工作温度:-20°C ~ 60°C 标准包装:1
AZ470K 功能描述:陶瓷复合电阻器 5.5watt 47ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 电阻:1 kOhms 容差:10 % 功率额定值:1 W 电压额定值:500 V 系列:PCF 温度系数:- 1200 PPM / K 端接类型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作温度范围:- 40 C to + 200 C 封装:Reel
AZ470KE 功能描述:陶瓷复合电阻器 5.5watt 47ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 电阻:1 kOhms 容差:10 % 功率额定值:1 W 电压额定值:500 V 系列:PCF 温度系数:- 1200 PPM / K 端接类型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作温度范围:- 40 C to + 200 C 封装:Reel
AZ471K 功能描述:陶瓷复合电阻器 5.5watt 470ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 电阻:1 kOhms 容差:10 % 功率额定值:1 W 电压额定值:500 V 系列:PCF 温度系数:- 1200 PPM / K 端接类型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作温度范围:- 40 C to + 200 C 封装:Reel
AZ471KE 功能描述:陶瓷复合电阻器 5.5watt 470ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 电阻:1 kOhms 容差:10 % 功率额定值:1 W 电压额定值:500 V 系列:PCF 温度系数:- 1200 PPM / K 端接类型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作温度范围:- 40 C to + 200 C 封装:Reel