收藏本站
参数资料
型号： AZH2213F
元件分类： 开关
英文描述： SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 4.5mm, PANEL MOUNT
封装： ROHS COMPLIANT
文件页数： 6/30页
文件大小： 1067K
代理商： AZH2213F
30
MOUNTING METHOD
Side mounting
1. Die casting case
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.37 to 1.57 Nm {14 to 16
kgcm}.
Remove the hexagonal nut when plunger
type is used in side mounting.
2. Plastic case
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.18 to 1.47 Nm {12 to 15
kgcm}.
Panel mounting
(Panel plunger type)
When the panel mounting type is fixed
on the panel, the torque of hexagonal nut
is set under 7.84 Nm {80 kgcm}.
APPLICABLE WIRE
(For screw terminal)
Sealed rubber of the lead wire is applica-
ble for 6 dia. to 8 dia.
Applicable wire
Electric
wire name
Wire
strand
2-wire
6.6 mm dia.
7.4 mm dia.
8.0 mm dia.
7.0 mm dia.
7.8 mm dia.
0.75 mm2
1.25 mm2
2.0 mm2
0.75 mm2
1.25 mm2
3-wire
Conductor
Finished
outside
diameter
Vinyl cab-
tyre cord
(VCTF)
WIRING (For screw terminal)
1) M3 small binding screw is used as a
terminal screw.
2) When wiring, don’t connect the lead
wire to the terminal directly. Fasten the
crimped terminals securely applying a
tightening torque of 0.20 to 0.29 Nm {2
to 3 kgcm}. Avoid using solder when
wiring.
3) Refer to the following diagram for
power supply wiring.
4) Take note the terminal arrangement is
different between plunger type and lever
type. (The arrangement of N.C. and N.O.
is reversed.)
5) Mount the terminal case securely after
ensuring that the rubber seals are
attached at the proper positions. Do a
visual check to make sure that the retain-
er is properly inserted on the protrusion
of the case. When installing the terminal
case of the plastic case type, push the
terminal case until it clicks into place,
and make sure there is no play after-
wards.
CONNECTOR TYPE
1) The cord outlet direction is inter-
changeable. Refer to “HOW TO
CHANGE THE CORD OUTLET DIREC-
TION FOR CONNECTOR TYPE”.
2) Do not remove the connector over 50
times.
3) Wiring diagram as shown below.
4) When the angle type of connector
cord is used, the cord outlet direction is
as follows.
Cord outlet direction (Right side)
Cord outlet direction (Left side)
Note: Contact No. 1 is not in use.
14.5
±0.2 dia.
.571
±.008 dia.
Panel mounting hole dimensions
(Unit: mm inch)
2-4.3 dia. or M4 screw hole
2-.169 dia.
33
±0.15
1.299
±.006
Side mounting hole dimensions
2-4.3 dia. or M4 screw hole
2-.169 dia.
33
±0.15
1.299
±.006
Side mounting hole dimensions
N.C.
terminal
N.O.
terminal
COM
terminal
Plunger type
N.O.
terminal
N.C.
terminal
COM
terminal
Lever type
Approx. 30
Approx. 45
Approx. 1.772
Approx. 15
Approx. .591
Approx. 1.181
N.C.
Contact No. 2
N.O.
Contact No. 4
COM
Contact No. 3
Contact No. of connector
2
1
4
3
HL (AZH)
相关PDF资料
PDF描述
AV63251264 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, 2.1mm, PANEL MOUNT
A165W-J2MR-T2-1 ROTARY SWITCH-2POSITIONS, SPDT, LATCHED, 3A, 30VDC, PANEL MOUNT
A1136-202FPSD ROTARY SWITCH-2POSITIONS, DPDT, LATCHED, 0.2A, 28VDC, THROUGH HOLE-STRAIGHT
A165W-A3MR-T1-2 ROTARY SWITCH-3POSITIONS, DPDT, LATCHED, 3A, 30VDC, PANEL MOUNT
A165W-T2AG-24D-1 ROTARY SWITCH-2POSITIONS, SPDT, LATCHED, 3A, 30VDC, PANEL MOUNT
相关代理商/技术参数
参数描述
AZH2221 制造商:Panasonic Electric Works 功能描述:LIMIT SWITCH, ROLLER LEVER, SPDT; Actuator Style:Roller Lever; Operating Force Max:2.45N; Switch Operation:-; Contact Voltage AC Max:125V; Contact Voltage DC Max:30V; Contact Current AC Max:100mA; Contact Current DC Max:100mA ;RoHS Compliant: Yes 制造商:Panasonic Electric Works 功能描述:Switch Limit N.O./N.C. SPDT Top Roller Lever Screw 0.1A 125VAC 2.45N Linear Screw Mount
AZH2224 制造商:Panasonic Electric Works 功能描述:
AZH2231 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Limit Switch, Panel Mount, Push Plunger, Die Cast, Screw Terminal, Bifurcated
AZH2232 制造商:Panasonic Electric Works 功能描述:
AZH2233 制造商:Panasonic Electric Works 功能描述:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*