- 您现在的位置：买卖IC网 > PDF目录210144 > AZH2344F SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 30VDC, 6mm, PANEL MOUNT PDF资料下载
参数资料
| 型号： | AZH2344F |
| 元件分类： | 开关 |
| 英文描述： | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 30VDC, 6mm, PANEL MOUNT |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 6/30页 |
| 文件大小： | 1067K |
| 代理商： | AZH2344F |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
30
MOUNTING METHOD
Side mounting
1. Die casting case
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.37 to 1.57 Nm {14 to 16
kgcm}.
Remove the hexagonal nut when plunger
type is used in side mounting.
2. Plastic case
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.18 to 1.47 Nm {12 to 15
kgcm}.
Panel mounting
(Panel plunger type)
When the panel mounting type is fixed
on the panel, the torque of hexagonal nut
is set under 7.84 Nm {80 kgcm}.
APPLICABLE WIRE
(For screw terminal)
Sealed rubber of the lead wire is applica-
ble for 6 dia. to 8 dia.
Applicable wire
Electric
wire name
Wire
strand
2-wire
6.6 mm dia.
7.4 mm dia.
8.0 mm dia.
7.0 mm dia.
7.8 mm dia.
0.75 mm2
1.25 mm2
2.0 mm2
0.75 mm2
1.25 mm2
3-wire
Conductor
Finished
outside
diameter
Vinyl cab-
tyre cord
(VCTF)
WIRING (For screw terminal)
1) M3 small binding screw is used as a
terminal screw.
2) When wiring, don’t connect the lead
wire to the terminal directly. Fasten the
crimped terminals securely applying a
tightening torque of 0.20 to 0.29 Nm {2
to 3 kgcm}. Avoid using solder when
wiring.
3) Refer to the following diagram for
power supply wiring.
4) Take note the terminal arrangement is
different between plunger type and lever
type. (The arrangement of N.C. and N.O.
is reversed.)
5) Mount the terminal case securely after
ensuring that the rubber seals are
attached at the proper positions. Do a
visual check to make sure that the retain-
er is properly inserted on the protrusion
of the case. When installing the terminal
case of the plastic case type, push the
terminal case until it clicks into place,
and make sure there is no play after-
wards.
CONNECTOR TYPE
1) The cord outlet direction is inter-
changeable. Refer to “HOW TO
CHANGE THE CORD OUTLET DIREC-
TION FOR CONNECTOR TYPE”.
2) Do not remove the connector over 50
times.
3) Wiring diagram as shown below.
4) When the angle type of connector
cord is used, the cord outlet direction is
as follows.
Cord outlet direction (Right side)
Cord outlet direction (Left side)
Note: Contact No. 1 is not in use.
14.5
±0.2 dia.
.571
±.008 dia.
Panel mounting hole dimensions
(Unit: mm inch)
2-4.3 dia. or M4 screw hole
2-.169 dia.
33
±0.15
1.299
±.006
Side mounting hole dimensions
2-4.3 dia. or M4 screw hole
2-.169 dia.
33
±0.15
1.299
±.006
Side mounting hole dimensions
N.C.
terminal
N.O.
terminal
COM
terminal
Plunger type
N.O.
terminal
N.C.
terminal
COM
terminal
Lever type
Approx. 30
Approx. 45
Approx. 1.772
Approx. 15
Approx. .591
Approx. 1.181
N.C.
Contact No. 2
N.O.
Contact No. 4
COM
Contact No. 3
Contact No. of connector
2
1
4
3
HL (AZH)
相关PDF资料 |
PDF描述 |
|---|---|
| AZH2012 | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, 4.5mm, PANEL MOUNT |
| AZ510442F | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, PANEL MOUNT |
| AZ51046619 | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, PANEL MOUNT |
| AZ7100F | SNAP ACTING/LIMIT SWITCH, DPDT, MOMENTARY, 0.4A, 115VDC, 2.8mm, PANEL MOUNT |
| AZ7310 | SNAP ACTING/LIMIT SWITCH, DPDT, MOMENTARY, 0.4A, 115VDC, 8mm, PANEL MOUNT-THREADED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AZH28113 | 制造商:Panasonic Electric Works 功能描述: |
| AZH28133 | 制造商:Panasonic Electric Works 功能描述: |
| AZHEL07 | 制造商:AZM 制造商全称:AZM 功能描述:ECL/PECL 2-Input XOR/XNOR |
| AZHEL11 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:ECL/PECL 1:2 Differential Fanout Buffer |
| AZHLT21 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Differential PECL to CMOS/TTL Translator |
发布紧急采购，3分钟左右您将得到回复。