- 您现在的位置：买卖IC网 > PDF目录10203 > B250B57A106E1G (ON Semiconductor)IC DSP AUDIO 16BIT 57CABGA PDF资料下载
参数资料
| 型号： | B250B57A106E1G |
| 厂商： | ON Semiconductor |
| 文件页数： | 4/30页 |
| 文件大小： | 0K |
| 描述： | IC DSP AUDIO 16BIT 57CABGA |
| 标准包装： | 2,500 |
| 系列： | BelaSigna® 250 |
| 类型： | 音频处理器 |
| 应用： | 便携式设备 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 57-VFBGA |
| 供应商设备封装： | 57-CABGA（5x5） |
| 包装： | 带卷 (TR) |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
BELASIGNA 250
http://onsemi.com
12
Internal Power Supplies
Power management circuitry in BELASIGNA 250 generates separate digital (VDDC) and analog (VREG, VDBL) regulated
supplies. Each supply requires an external decoupling capacitor, even if the supply is not used externally. Decoupling capacitors
should be placed as close as possible to the power pads. Further details on these critical signals are provided in Table 5.
Noncritical signals are outlined in Table 6.
Table 5. CRITICAL SIGNALS
Pin Name
Description
Routing Guideline
VBAT
Power supply
Place 1 mF (min) decoupling capacitor close to pin. Connect
negative terminal of capacitor to DGND plane.
VREG, VDBL
Internal regulator for analog sections
Place separate 1 mF decoupling capacitors close to each pin. Con-
nect negative capacitor terminal to AGND. Keep away from digital
traces and output traces. VREG may be used to generate micro-
phone bias. VDBL shall not be used to supply external circuitry.
AGND
Analog ground return
Connect to AGND plane.
VDDO / VDDC
Internal regulator for digital sections
(pads and core)
Place 10 mF decoupling capacitor close to pin. Connect negative
terminal of capacitor to DGND.
GNDO / GNDC
Digital ground return (pads and core)
Connect to digital ground.
AI0, AI1 / LOUT,
AI2, AI3
Microphone inputs
Keep as short as possible. Keep away from all digital traces and
audio outputs. Avoid routing in parallel with other traces. Connect
unused inputs to AGND.
AIR
Input stage reference voltage
Connect to AGND. If no analog ground plane, should share trace
with microphone grounds to star point.
AO0, AO1
Analog audio output
Keep away from microphone inputs.
RCVR0+, RCVR0,
RCVR1+, RCVR1
Direct digital audio output
Keep away from analog traces, particularly microphone inputs.
Route corresponding traces as differential pair; route parallel to each
other and approximately the same length.
AOR
Output stage reference voltage
Connect to star point. Share trace with power amplifier (if present).
RCVRGND
Output stage ground return
Connect to star point. Keep away from analog inputs.
EXT_CLK
External clock input / internal clock
output
Minimize trace length. Keep away from analog signals. If possible,
surround with digital ground.
AI_RC
Infrared receiver input
If used, minimize trace length to photodiode.
Not available on the CABGA option
Table 6. NONCRITICAL SIGNALS
Pin Name
Description
Routing Guideline
CAP0, CAP1
Internal charge pump capacitor connection
Place 100 nF capacitor close to pins
DEBUG_TX, DEBUG_RX
Debug port
Not critical Connect to test points
TWSS_SDA, TWSS_CLK
TWSS port
Not critical
GPIO[14..0]
Generalpurpose I/O
Not critical
GPIO[15]
Generalpurpose I/O
Determines voltage mode during boot. For 1.8 V
operation, should be connected to DGND.
Not critical
UART_RX, UART_TX
Generalpurpose UART
Not critical
PCM_FRAME, PCM_CLK,
PCM_OUT, PCM_IN
Pulse code modulation port
Not critical Keep away from analog signals.
I2S_INA, I2S_IND, I2S_FA,
I2S_FD, I2S_OUTA, I2S_OUTD
I2S compatible port
Not critical
UCLK
Programmable clock output
Not critical
If used, keep away from analog inputs/outputs
LSAD[5..0]
Lowspeed A/D converters
Not critical
SPI_CLK, SPI_CS,
SPI_SERI, SPI_SERO
Serial peripheral interface port
Connect to EEPROM
Not critical
相关PDF资料 |
PDF描述 |
|---|---|
| MS27472T14B97P | CONN RCPT 12POS WALL MT W/PINS |
| VE-231-MX-F2 | CONVERTER MOD DC/DC 12V 75W |
| VE-261-CU-F2 | CONVERTER MOD DC/DC 12V 200W |
| EN3C11M26SX | CONN PLUG 11POS MALE CORD #26 |
| VE-231-MX-F1 | CONVERTER MOD DC/DC 12V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B250BE-13 | 功能描述:DIODE SCHOTTKY 50V 2A SMB 制造商:diodes incorporated 系列:- 零件状态:在售 二极管类型:肖特基 电压 - DC 反向（Vr）（最大值）:50V 电流 - 平均整流（Io）:2A 不同 If 时的电压 - 正向（Vf:650mV @ 2A 速度:快速恢复 = 200mA（Io） 不同?Vr 时的电流 - 反向漏电流:100μA @ 50V 不同?Vr，F 时的电容:75pF @ 4V，1MHz 安装类型:表面贴装 封装/外壳:DO-214AA，SMB 供应商器件封装:SMB 工作温度 - 结:-55°C ~ 150°C 标准包装:3,000 |
| B250BTZ13JKF | 制造商:Micron Industries Corporation 功能描述: |
| B250C 3700/2200 | 制造商:DIOTEC 功能描述:BRIDGE RECTIFIER 制造商:Diotec Semiconductor 功能描述:BRIDGE RECTIFIER |
| B250C100 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:BRIDGE RECTIFIERS (HYPERECTIFIER) QUICK GUIDE |
| B250C1000 | 制造商:WTE 制造商全称:Won-Top Electronics 功能描述:1.0A BRIDGE RECTIFIER |
发布紧急采购，3分钟左右您将得到回复。