- 您现在的位置：买卖IC网 > PDF目录18120 > B25834F5475K9 (EPCOS Inc)MKV CAPACITOR 4.7UF 750V PDF资料下载
参数资料
| 型号： | B25834F5475K9 |
| 厂商： | EPCOS Inc |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | MKV CAPACITOR 4.7UF 750V |
| 标准包装： | 72 |
| 系列： | B25834 |
| 电容： | 4.7µF |
| 额定电压 - AC： | 750V |
| 电介质材料： | 聚丙烯，金属化 |
| 容差： | ±10% |
| 工作温度： | -25°C ~ 85°C |
| 端子： | 螺钉端子 |
| 特点： | 通用 |
| 应用： | * |
| 其它名称： | B25834F5475K 9 B25834F5475K009 |
MKV AC Capacitors
B25834
Damping, Commutating
Cautions and warnings
Safety
■ In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not
be used at all. This applies also in cases of oil leakage.
■ Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or prop-
erty damage may result from bursting of the capacitor or from expulsion of oil or melted material
due to mechanical disruption of the capacitor.
■
■
■
■
■
■
Ensure good, effective grounding for capacitor enclosures.
Observe appropriate safety precautions during operation (self-recharging phenomena and the
high energy contained in capacitors).
Handle capacitors carefully, because they may still be charged even after disconnection.
The terminals of capacitors, connected bus bars and cables as well as other devices may also
be energized.
Follow good engineering practice.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not
exceeded at extreme service conditions (see www.epcos.com/thermal_design).
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can
are avoided.
Storage and Operating Conditions
Do not use or store capacitors in corrosive atmosphere especially where chloride gas, sulfide gas,
acid, alkali, salt or the like are present. In dusty environments, regular maintenance and cleaning
especially of the terminals is required to avoid conductive path between phases and/or phases and
ground.
Overpressure disconnector
To ensure full functionality of an overpressure disconnector, the following must be observed:
■ The elastic elements must not be hindered, i.e.
– connecting lines must be flexible leads (cables),
– there must be sufficient space (minimum 12 mm) above the connections for expansion of the
overpressure disconnector,
– folding crimps must not be retained by clamps.
■ Stress parameters of the capacitor must be within the IEC61071 specification.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing
capacitors too. The maximum service life expectancy may vary depending on the application the
capacitor is used in.
11
09/05
相关PDF资料 |
PDF描述 |
|---|---|
| RES250 | RHEOSTAT 250 OHM 12.5W |
| M2015BB3W01 | SW TOGGLE SPDT THR SILV .250"PC |
| IXTQ26N60P | MOSFET N-CH 600V 26A TO-3P |
| B32563J6105K | FILM CAP 1.0UF 10% 400V |
| FVXO-PC73B-400 | OSC 400 MHZ 3.3V PECL SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B25834F6104M 1 | 制造商:TDK-EPC 功能描述:MKV CAPACITOR 0,1UF 900V - Bulk |
| B25834F6104M001 | 功能描述:薄膜电容器 0.1UF 900V MKV CAP RoHS:否 制造商:Cornell Dubilier 产品类型: 电介质:Polyester 电容:0.047 uF 容差:10 % 电压额定值:100 V 系列:225P 工作温度范围:- 55 C to + 85 C 端接类型:Radial 引线间隔:9.5 mm |
| B25834-F6104-M001 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:MKV AC capacitors |
| B25834F6104M1 | 功能描述:薄膜电容器 MKV CAPACITOR 0,1UF 900V RoHS:否 制造商:Cornell Dubilier 产品类型: 电介质:Polyester 电容:0.047 uF 容差:10 % 电压额定值:100 V 系列:225P 工作温度范围:- 55 C to + 85 C 端接类型:Radial 引线间隔:9.5 mm |
| B25834-F6104-M1 | 制造商:EPCOS 功能描述:Bulk |
发布紧急采购，3分钟左右您将得到回复。