- 您现在的位置：买卖IC网 > PDF目录17781 > B32614A4105J008 (EPCOS Inc)CAP FILM 1UF 400VDC RADIAL PDF资料下载
参数资料
| 型号： | B32614A4105J008 |
| 厂商： | EPCOS Inc |
| 文件页数： | 24/30页 |
| 文件大小： | 0K |
| 描述： | CAP FILM 1UF 400VDC RADIAL |
| 标准包装： | 200 |
| 系列： | B32614 |
| 电容： | 1.0µF |
| 额定电压 - AC： | 200V |
| 额定电压 - DC： | 400V |
| 电介质材料： | 聚丙烯，金属化 |
| 容差： | ±5% |
| 工作温度： | -55°C ~ 110°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 径向 |
| 尺寸/尺寸： | 1.240" L x 0.453" W（31.50mm x 11.50mm） |
| 高度 - 座高（最大）： | 0.768"（19.50mm） |
| 端子： | PC 引脚 |
| 引线间隔： | 1.083"（27.50mm） |
| 特点： | 交流和双倍脉冲 |
| 包装： | 散装 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页
B32612 ... B32614
High pulse (wound)
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature T max . Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 ° C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 ° C
MKT 160 ° C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤ 10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 ° C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 30
相关PDF资料 |
PDF描述 |
|---|---|
| TPC11FGVRA0 | SWITCH PUSH SPDT 0.4VA 20V |
| B32612A2472J008 | CAP FILM 4700PF 2KVDC RADIAL |
| TPB11CGPCES004 | SWITCH PUSH SPST-NO 0.4VA 20V |
| TSPD11CGPC004 | SWITCH PUSH SPST-NO 0.4VA 20V |
| 38CSP7AP2M2RT | SWITCH PUSHBUTTON SPDT 0.4VA 20V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B32614A4155 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors Metallized Polyester Film Capacitors (MKT) |
| B32614A4155K10 | 制造商:TDK Epcos 功能描述: |
| B32614A4155K8 | 制造商:TDK Epcos 功能描述: |
| B32614A4225 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors Metallized Polyester Film Capacitors (MKT) |
| B32614A4474 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors Metallized Polyester Film Capacitors (MKT) |
发布紧急采购，3分钟左右您将得到回复。