- 您现在的位置：买卖IC网 > PDF目录18207 > B32674D3335K (EPCOS Inc)CAP FILM 3.3UF 300VDC RADIAL PDF资料下载
参数资料
| 型号： | B32674D3335K |
| 厂商： | EPCOS Inc |
| 文件页数： | 16/22页 |
| 文件大小： | 0K |
| 描述： | CAP FILM 3.3UF 300VDC RADIAL |
| 产品培训模块： | Film Capacitors |
| 产品目录绘图： | B32zzz(D,E,T) Series Side 1 B32zzz(D,E,T) Series Side 2 |
| 标准包装： | 1,120 |
| 系列： | B32674 |
| 电容： | 3.3µF |
| 额定电压 - AC： | 160V |
| 额定电压 - DC： | 300V |
| 电介质材料： | 聚丙烯，金属化 |
| 容差： | ±10% |
| ESR（等效串联电阻）： | 5.3 毫欧 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 径向 |
| 尺寸/尺寸： | 1.240" L x 0.492" W（31.50mm x 12.50mm） |
| 高度 - 座高（最大）： | 0.846"（21.50mm） |
| 端子： | PC 引脚 |
| 引线间隔： | 1.083"（27.50mm） |
| 特点： | 交流和双倍脉冲 |
| 包装： | 散装 |
| 其它名称： | 495-2909 B32674D3335K000 |
B32674 ... B32678
MKP DC link
high power series
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature T max . Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 ° C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 ° C
MKT 160 ° C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤ 10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 ° C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 22
相关PDF资料 |
PDF描述 |
|---|---|
| FXO-LC536-125 | OSC 125 MHZ 3.3V LVDS SMD |
| 7A-12.288MBBK-T | CRYSTAL 12.288 MHZ 20PF SMD |
| TL46P000200 | SWITCH TOGGLE SUB-MINI SEALED |
| CD11.1501.151 | MOD PWR 5-FUNCTION 1A 4.8QC SCRW |
| 34BWDP32B4M7GT | TOG MINI S DPDT O-O-O N RAV LF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B32674D3335K189 | 功能描述:FILM CAP MKP DC LINK 3.3F 10% 30 制造商:epcos (tdk) 系列:* 零件状态:有效 标准包装:1,200 |
| B32674D3475K | 功能描述:薄膜电容器 4.7uF 300volts 10% 27.5mmL/S 0.8mmL/D RoHS:否 制造商:Cornell Dubilier 产品类型: 电介质:Polyester 电容:0.047 uF 容差:10 % 电压额定值:100 V 系列:225P 工作温度范围:- 55 C to + 85 C 端接类型:Radial 引线间隔:9.5 mm |
| B32674D3475K | 制造商:TDK Epcos 功能描述:CAPACITOR PP FILM 4.7UF 300V 10% RAD |
| B32674D3475K000 | 制造商:EPCOS 功能描述:Bulk |
| B32674D3475K189 | 功能描述:FILM CAP MKP DC LINK 4.7F 10% 30 制造商:epcos (tdk) 系列:* 零件状态:有效 标准包装:1,000 |
发布紧急采购，3分钟左右您将得到回复。