- 您现在的位置：买卖IC网 > PDF目录18233 > B32923C3155M189 (EPCOS Inc)FILM CAP 1.50UF 20% 305VAC RFI PDF资料下载
参数资料
| 型号： | B32923C3155M189 |
| 厂商： | EPCOS Inc |
| 文件页数： | 14/22页 |
| 文件大小： | 0K |
| 描述： | FILM CAP 1.50UF 20% 305VAC RFI |
| 标准包装： | 300 |
| 系列： | B32923 |
| 电容： | 1.5µF |
| 额定电压 - AC： | 305V |
| 电介质材料： | 聚丙烯 |
| 容差： | ±20% |
| 工作温度： | -40°C ~ 110°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 径向 |
| 尺寸/尺寸： | 1.043" L x 0.472" W（26.50mm x 12.00mm） |
| 高度 - 座高（最大）： | 0.866"（22.00mm） |
| 端子： | PC 引脚 |
| 引线间隔： | 0.886"（22.50mm） |
| 特点： | EMI 抑制 |
| 应用： | * |
| 包装： | 带卷 (TR) |
B32921C/D ... B32928C/D
X2 / 305 V AC
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature T max . Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 ° C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 ° C
MKT 160 ° C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤ 10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 ° C in the preheater phase
rapid cooling after soldering
Application note for X1 / X2 EMI capacitors
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 22
相关PDF资料 |
PDF描述 |
|---|---|
| 5248WCDB16X404 | SWITCH TOGGLE MINI |
| S1A/UC | SW TOGGLE SPST SOLDER LUG UC |
| M2026BB1W01 | SW TOGGLE SP3T THR SILV SLD LUG |
| M2012ES2G13/U | SW TOGGLE SPDT FLAT W/KEYWAY PC |
| M2024LL1W01 | SW TOGGLE SP3T LOCK THR SILV SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B32923C3155M289 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors EMI Suppression Capacitors (MKP) |
| B32923C3155M783 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors EMI Suppression Capacitors (MKP) |
| B32923C3155M784 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors EMI Suppression Capacitors (MKP) |
| B32923C3155M786 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors EMI Suppression Capacitors (MKP) |
| B32923C3155M787 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors EMI Suppression Capacitors (MKP) |
发布紧急采购，3分钟左右您将得到回复。