- 您现在的位置：买卖IC网 > Datasheet目录670 > B39311B3766Z810 (EPCOS Inc)FILTER SAW 312.2MHZ REMOTE SMD Datasheet资料下载
参数资料
| 型号： | B39311B3766Z810 |
| 厂商： | EPCOS Inc |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | FILTER SAW 312.2MHZ REMOTE SMD |
| 产品目录绘图： | B39xxxB3(5,7)xxZ810 Footprint B39xxxB3(5,7)xxZ810 Top B39xxxB3(5,7)xxZ810 Side |
| 标准包装： | 1 |
| 频率： | 312.2MHz 中心 |
| 带宽： | 360kHz |
| 滤波器类型： | 带通 |
| 插入损耗： | 1.9dB |
| 应用： | 远程控制 |
| 封装/外壳： | 8-SMD，无引线 |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 高度（最大）： | 0.059"（1.50mm） |
| 尺寸/尺寸： | 0.150" L x 0.150" W（3.80mm x 3.80mm） |
| 其它名称： | 495-2355-6 |
SAW Components
Low-loss Filter
B3766
312,20 MHz
Data Sheet
Matching network to 50 ? (element values depend on pcb layout and equivalent circuit )
L s1 = 56 nH
L s2 = 56 nH
Minimising the crosstalk
For a good ultimate rejection a low crosstalk is necessary. Low crosstalk can be realised with
a good RF layout. The major crosstalk mechanism is caused by the “ground-loop” problem.
Grounding loops are created if input-and output transducer GND are connected on the top-side
of the PCB and fed to the system grounding plane by a common via hole. To avoid the common
ground path, the ground pin of the input- and output transducer are fed to the system ground
plane (bottom PCB plane) by their own via hole. The transducers’ grounding pins should be
isolated from the upper grounding plane.
A common GND inductivity of 0.5nH degrades the ultimate rejection (crosstalk) by 20dB.
The optimised PCB layout, including matching network for transformation to 50 Ohm, is shown
here. In this PCB layout the grounding loops are minimised to realise good ultimate rejection.
Optimised PCB layout for SAW filters in QCC8B package, pinning 2,5 (top side, scale 1:1)
The bottom side is a copper plane (system ground area). The input and output grounding pins
are isolated and connected to the common ground by separated via holes.
For good contact of the upper grounding area with the lower side it is necessary to place
enough via holes.
4
Jul 05, 2004
相关PDF资料 |
PDF描述 |
|---|---|
| B39311B3768Z810 | FILTER SAW 313.85MHZ REMOTE SMD |
| B39311B3769Z810 | FILTER SAW 314.85MHZ SMD |
| B39311B3784Z810 | FILTER SAW 314.45MHZ SMD |
| B39311R771U310 | RESONATOR SAW 314.875/315.125MHZ |
| B39311R854H210 | RESONATOR SAW CER 314.5MHZ SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B39311-B3766-Z810 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:SAW Components Low-loss Filter 312,20 MHz |
| B39311B3768Z810 | 功能描述:信号调节 QCC8B Frontendfilter RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| B39311-B3768-Z810 | 制造商:TDK Epcos 功能描述: |
| B39311B3769Z810 | 功能描述:信号调节 314.85 MHz SMD RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| B39311-B3769-Z810 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:SAW Components Low-loss Filter 314,85 MHz |
发布紧急采购，3分钟左右您将得到回复。