- 您现在的位置：买卖IC网 > Datasheet目录672 > B39871B3746H110 (EPCOS Inc)FILTER SAW 868.60MHZ SMD Datasheet资料下载
参数资料
| 型号： | B39871B3746H110 |
| 厂商： | EPCOS Inc |
| 文件页数： | 5/10页 |
| 文件大小： | 0K |
| 描述： | FILTER SAW 868.60MHZ SMD |
| 标准包装： | 9,000 |
| 频率： | 868.6MHz 中心 |
| 带宽： | 1.2MHz |
| 滤波器类型： | 带通 |
| 插入损耗： | 2.6dB |
| 应用： | 远程控制 |
| 封装/外壳： | 6-SMD，无引线 |
| 安装类型： | 表面贴装 |
| 包装： | 带卷 (TR) |
| 高度（最大）： | 0.039"（1.00mm） |
| 尺寸/尺寸： | 0.118" L x 0.118" W（3.00mm x 3.00mm） |
SAW Components
SAW RF filter
B3746
868.60 MHz
Data sheet
Matching network to 50 ? (element values depend on pcb layout and equivalent circuit)
C p1 = 3.3 pF
L s2 = 18 nH
L s3 = 18 nH
C p4 = 3.3 pF
Minimising the crosstalk
For a good ultimate rejection a low crosstalk is necessary. Low crosstalk can be realised with a good
RF layout. The major crosstalk mechanism is caused by the “ground-loop” problem.
Grounding loops are created if input-and output transducer GND are connected on the top-side of
the PCB and fed to the system grounding plane by a common via hole. To avoid the common
ground path, the ground pin of the input- and output transducer are fed to the system ground plane
(bottom PCB plane) by their own via hole. The transducers’ grounding pins should be isolated from
the upper grounding plane.
A common GND inductivity of 0.5nH degrades the ultimate rejection (crosstalk) by 20dB.
The optimised PCB layout, including matching network for transformation to 50 Ohm, is shown
here. In this PCB layout the grounding loops are minimised to realise good ultimate rejection
Optimised PCB layout for SAW filters in DCC6E package, pinning 2,4 (top side, scale 1:1)
The bottom side is a copper plane (system ground area). The input and output grounding pins are
isolated and connected to the common ground by separated via holes.
For good contact of the upper grounding area with the lower side it is necessary to place enough
via holes.
Please read cautions and warnings and
important notes at the end of this document.
5
March 20, 2013
相关PDF资料 |
PDF描述 |
|---|---|
| B39871B3903U510 | FILTER SAW 869.0MHZ SMD |
| B39881B7845K410 | FILTER SAW 881.5MHZ LOW-LOSS SMD |
| B39901B3934H110 | FILTER SAW 902.875MHZ SMD |
| B39921B3588U410W9 | FILTER SAW 915MHZ REMOTE SMD |
| B39921B3718U410 | FILTER SAW 916MHZ SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B39871B3749H110 | 制造商:TDK EPCOS 功能描述:FILTER SAW SMD RF 869.3MHZ RKE |
| B39871B3762Z810 | 功能描述:信号调节 FRONTEND FILTER FILTER RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| B39871-B3762-Z810 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:SAW Components Low-loss Filter 868,30 MHz |
| B39871B3773Z810 | 功能描述:信号调节 868.95 MHz SMD RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| B39871B3776Z810 | 功能描述:信号调节 868.3 MHz RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。