参数资料
| 型号： | B72590D50A60 |
| 厂商： | EPCOS Inc |
| 文件页数： | 13/22页 |
| 文件大小： | 0K |
| 描述： | CERADIODE 5.6VDC 10A 0402 |
| 产品目录绘图： | B72_0402 Series Side 1 B72_0402 Series Side 2 |
| 标准包装： | 1 |
| 系列： | CeraDiode |
| 变阻器电压： | 6.4V |
| 电流 - 浪涌： | 10A |
| 电路数： | 1 |
| 最大直流电压： | 5.6VDC |
| 封装/外壳： | 0402（1005 公制） |
| 产品目录页面： | 2358 (CN2011-ZH PDF) |
| 其它名称： | 495-3418-6 |
CeraDiodes
Standard series
2
Soldering guidelines
The use of mild, non-activated fluxes for soldering is recommended, as well as proper cleaning of
the PCB.
The components are suitable for reflow soldering to JEDEC J-STD-020D.
3
3.1
Solder joint profiles / solder quantity
Cement quantity
The component is fixed onto the circuit board with cement prior to soldering. It must still be able
to move slightly. When the board is placed into the reflow oven, excessively rigid fixing can lead
to high forces acting on the component and thus to a break. In addition, too much cement can
lead to unsymmetrical stressing and thus to mechanical fracture of the component. The cement
must also be so soft during mounting that no mechanical stressing occurs.
3.2
Mounting the components on the board
It is best to mount the components on the board before soldering so that one termination does not
enter the oven first and the second termination is soldered subsequently. The ideal case is simul-
taneous wetting of both terminations.
3.3
Solder joint profiles
If the meniscus height is too low, that means the solder quantity is too low, the solder joint may
break, i.e. the component becomes detached from the joint. This problem is sometimes interpret-
ed as leaching of the external terminations.
If the solder meniscus is too high, i.e. the solder quantity is too large, the vise effect may occur.
As the solder cools down, the solder contracts in the direction of the component. If there is too
much solder on the component, it has no leeway to evade the stress and may break, as in a vise.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 22
相关PDF资料 |
PDF描述 |
|---|---|
| OP162GSZ-REEL7 | IC OPAMP GP R-R 15MHZ LN 8SOIC |
| AD8065ARZ-REEL7 | IC OPAMP VF R-R LN LP 30MA 8SOIC |
| 0459844221 | CONN RCPT R/A 4PWR 16SGL 3.18MM |
| 2060.0006.11 | FUSE 250MA 125V SMD FAST |
| OP193FSZ-REEL7 | IC OPAMP GP 35KHZ PREC 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B72590D50H160 | 功能描述:ESD 抑制器 Var CDS2C05HDMI1 RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C |
| B72590D50H260 | 功能描述:ESD 抑制器 0402 90Vdc 0.6pF CerDiod CDS2C05HDMI2 RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C |
| B72590E0140L060 | 制造商:TDK Epcos 功能描述:VARISTOR MULTILAYER 16VDC 0402 制造商:TDK Epcos 功能描述:VARISTOR, MULTILAYER, 16VDC, 0402 制造商:TDK Epcos 功能描述:VARISTOR, MULTILAYER, 16VDC, 0402, Series:E, Varistor Type:Multilayer Varistor (MLV), Peak Surge Current @ 8/20s:10A, Varistor Case:0402 [1005 Metric], Clamping Voltage Vc Max:46V, Voltage Rating V DC:16V, Voltage Rating V AC:14V, , RoHS Compliant: Yes 制造商:TDK Epcos 功能描述:Metal-Oxide Varistor 14Vrms 3mW 0402 |
| B72590E0170S160 | 制造商:TDK-EPC 功能描述:VARISTOR MULTILAYER 19VDC 0 制造商:TDK-EPC 功能描述:VARISTOR, MULTILAYER, 19VDC, 0402 制造商:TDK-EPC 功能描述:VARISTOR, MULTILAYER, 19VDC, 0402; Series:E; Varistor Type:Multilayer Varistor (MLV); Peak Surge Current @ 8/20s:10A; Varistor Case:0402 [1005 Metric]; Clamping Voltage Vc Max:59V; Voltage Rating V DC:19V; Voltage Rating V AC:17V; ;RoHS Compliant: Yes 制造商:TDK-EPC 功能描述:Metal-Oxide Varistor 17Vrms 3mW 0402 |
| B72590E0170S170 | 功能描述:VARISTOR 32.5V 10A 0402 制造商:epcos (tdk) 系列:汽车级，AEC-Q200 零件状态:在售 变阻器电压:24.38V 压敏电压（典型）:32.5V 压敏电压（最大）:40.63V 电流 - 浪涌:10A 能量:0.01J 电路数:1 最大 AC 电压:17V 最大 DC 电压:19V 不同频率时的电容:33pF @ 1kHz 工作温度:-55°C ~ 150°C（TA） 安装类型:表面贴装，MLCV 封装/外壳:0402（1005 公制） 标准包装:50,000 |
发布紧急采购，3分钟左右您将得到回复。